|
| 1 | पानी की टंकी की स्थापना |
| 2 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 20 mm dia. nominal bore |
| 3 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 32 mm dia. nominal bore |
| 4 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore |
| 5 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20 mm dia. nominal bore |
| 6 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore |
| 7 | Providing and fixing PVC Union in PVC pipe including cutting and threading the pipe and making long screws etc. complete (New work) 20 mm nominal bore |
| 8 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 9 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore. |
| 10 | Fixing of storage tank stand and placing of storage tank on M.S. stand with ALL Fitting including all labour, materials & t&P etc. |
| 11 | Making of Platerform for waste water |
| 12 | 110 mm dia. |
| 13 | 200mm. Dia bore |
| 14 | Supply and Packing the bore with gravel of 1.5 mm t0 5.0 mm nominal size. |
| 15 | P/F of 110 (O.D.) P.V.C. 6kg/cm2 screen of superior quality I.S.I |
| 16 | S/F of Lynon Mess Jali complete work |
| 17 | P/F of 110 (O.D.) P.V.C. 6kg/cm2 I.S.I. mark superior quality pipe with socket and joining special of complete |
| 18 | P/F at required depth 110 mm bottom bail plug with hook complete and screwed |
| 19 | P/F of M.S. clamp made up 75x12 mm with 30 cm projection on etiher side ot be fixed surrounding the pipe with cost of concrete block to embedden in floor |
| 20 | P/F at required depth 110 mm M.S. well cap 6mm thick M.S. sheet duly threaded on side surface |
| 21 | Development of bore well by compressor/high discharege pump and removal of mud etc. complete |
| 22 | P/F of ISI ( 1.00 H.P.) sub-mersible pump complete with starter panel and making connection of starter to source of electric supply. 1615315931 |
| 23 | S/F of sub-mersible cable of 3 core 2.5 sqm. Copper wire water proof. |
| 24 | S/F of steel wire for clamping of sub-mersible pump. |
| 25 | P/F of 40mm H.D.P. pipe rool/G.I. Pipe |
| 26 | 40mm PVC elbow |
| 27 | Lowering of submersible pump with complere clamping steel wire, cable and jointing of 32mm PVC pipe with teflon roll and fixing of starter panel etc. testing complete |
| 28 | For 15 Nos TTSP Please Enable Macros to View BoQ information |