|
| 1 | Sub-Head : Reinforced Cement Concrete |
| 2 | Providing, hoisting and fixing up to floor five level precast reinforced cement concrete in small lintels not exceeding 1.5m clear span up to floor five level, including the cost of required centering, shuttering but, excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone- III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources ). |
| 3 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. |
| 4 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 5 | Sub-Head : Masonry Work |
| 6 | Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in : |
| 7 | Cement mortar 1:6 (1 cement : 6 Coarse sand) |
| 8 | Sub-Head : Cladding Work |
| 9 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. |
| 10 | Granite stone slab all colour and texture except black, Cherry/ Ruby red |
| 11 | Area of slab upto 0.50 sqm |
| 12 | Sub-Head : Wood and P.V.C. Work |
| 13 | Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. |
| 14 | After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod pf approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. |
| 15 | Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS:16231 shall be paid separately. |
| 16 | Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for: |
| 17 | (i) Sites with basic wind speed > 45 m/sec as per IS 875 - Part 3 |
| 18 | (ii) Sites with structure height more than 20m for all wind speeds. |
| 19 | Two track two panels sliding window with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. |
| 20 | Using R2 series with frame (40mm & above) x (40mm & above) & sash (25mm & above) x (50mm & above) with zinc alloy (zamak) powder coated touch locks with hook (Height upto 1.2 meter) |
| 21 | Fixed window / ventilator with mullion / transom. |
| 22 | Using R1 series with frame (33mm & above ) x (35mm & above) & mullion (33mm & above) x (50mm & above). (Height upto 0.90 meter) |
| 23 | Sub-Head : Steel Work |
| 24 | Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge. |
| 25 | 10 x 160 mm |
| 26 | Sub-Head : Flooring |
| 27 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. |
| 28 | Double charge vitrified tile polished finish of size |
| 29 | Size of Tile 600 x 600 mm |
| 30 | Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3kg/sqm |
| 31 | Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. |
| 32 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make in all colours & shade in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete. |
| 33 | Size of Tile 600x600 mm |
| 34 | Sub-Head : Roofing |
| 35 | Providing and fixing plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately). |
| 36 | 6 mm thick Cement fiber board, Type-B, Category-III as per IS: 14862 : 2000 |
| 37 | Sub-Head : Finishing |
| 38 | 12 mm cement plaster of mix : |
| 39 | 1:6 (1 cement: 6 coarse sand) |
| 40 | 15 mm cement plaster on rough side of single or half brick wall of mix : |
| 41 | 1:6 (1 cement: 6 coarse sand) |
| 42 | Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces: |
| 43 | Two coats |
| 44 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: |
| 45 | Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 46 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 47 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade. |
| 48 | Old work (one or more coats) |
| 49 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. |
| 50 | Two coats. |
| 51 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. |
| 52 | With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. |
| 53 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 54 | French spirit polishing : |
| 55 | One or more coats on old work. |
| 56 | Sub-Head : Repairs to Buildings |
| 57 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. |
| 58 | With cement mortar 1:4 (1 cement : 4 fine sand). |
| 59 | Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/rubbish to the nearest municipal dumping ground, all complete as per directions of Engineer-In-Charge. |
| 60 | For door/ window/ clerestory window. |
| 61 | Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge. |
| 62 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 63 | Sub-Head : Dismantling and Demolishing |
| 64 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 65 | Of area 3 sq. metres and below |
| 66 | Of area beyond 3 sq. metres |
| 67 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 68 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 69 | Sub-Head : Aluminium Work |
| 70 | Providing and fixing glazing in aluminium / UPVC door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 71 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 72 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors ,embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. |
| 73 | With stainless steel cover plate minimum 1.25 mm thickness. |
| 74 | Sub-Head : NEW TECHNOLOGIES AND MATERIALS |
| 75 | Providing and fixing 15 mm thick false ceiling tiles at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991,in true horizontal level on the existing frame work consisting of T-sections and L - sections suitably fixed according to tile size as per direction of Engineer-in-charge. |
| 76 | Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance > 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised @ 80 gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, |
| 77 | spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size 24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the Engineer-in-charge. |
| 78 | With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6) |
| 79 | Sub-Head : MARKET RATED ITEMS |
| 80 | Supplying & engaging unskilled labour such as Beldar / Coolie / Sweeper etc along with required T&P for cleaning of roof terrace, chajja, rainwater pipe mouth, drain, cutting of bushes & cleaning of floors & walls of rooms, cleaning of toilets etc as per necessity & as per direction and upto satisfaction of Engineer-in-charge. |
| 81 | Cleaning and polishing old terrazo (marble chips) flooring and skirting by grinding / rubbing with machine fitted with fine grit blocks,No-120, for 1st grinding & No-320, for 2nd grinding to get even & smooth surface without pin holes. The surface shall be watered and ground evenly while polishing in every cycle. After 1st grinding, the surface shall be thoroughly washed to remove all grinding mud and covered with a grout of white cement and colouring matter in the same mix and proportion as the topping in order to fill any pin holes that appear. The surface shall be allowed to dry & cure adequately before 2nd & final grinding. The finished surface should show the marble chips evenly exposed.Where use of machine for polishing is not feasible or possible, rubbing and polishing shall be done by hand in the same manner as specified for machine polishing except that carborundum stone of Grade-80 shall be used for 1st rubbing & stone of fine grade (No-120) for final rubbing & polishing. After final polish either by machine or hand, oxalic acid shall be dusted over the surface @ 33 gm per square metre sprinkled with water and rubbed hard with a pad of woolen rags. The following day, the floor shall be wiped with a moist rag and dried with a soft cloth and finished clean. Finally, wax polish of approved brand and manufacture shall be applied in uniform layer to the dry surface of flooring / skirting. When the layer of wax is stiffened and surface of floor is saturated with polish, polishing shall be resorted with machine fitted with pad of rags and shall be done until shades of all chips have appeared and glossy surface is obtained. Surplus wax, if any, shall be sucked suitably. The rate is for all the operations described above and net exposed area of the surface polished shall be measured for payment. |
| 82 | Providing and fixing 2.00 mm thick homogeneous poly vinyl chloride sheet of approved quality ( Wonderfloor or equivalent make ) in flooring on a smooth and damp proof base using rubber based adhesives of approved quality and manufacture like Dunlop S-758 Fevicol SR-998 or equivalent including cleaning, levelling & drying of base and rolling with light wooden roller weighing about 5.00Kg all complete as directed by the Engineer-in-charge. |
| 83 | Providing and fixing manually chain operated roller blind (Black out) with head rail of VISTA make , SERENE (OPAQUE) series of approved colour as per manufacturer's specification and as per the direction of Engineer-in-Charge. The rate includes cost of all materials, accessories, carriage, T&P & labour etc all complete and nothing extra shall be paid on any account. |
| 84 | Providing and fixing on wall Sign Board of required size consisting of base plate of 6 mm thick imported quality acrylic sheet of approved brand and manufacture and of either clear or of required colour / shade with Vinyl stickering (sheet thickness not less than 80 micron) of the chosen text consisting of alphabets, numerals & punctuation marks etc of required font, size & colour on top of the board including fixing with stainless steel nuts & bolts /studs as per direction of Engineer-in-charge. (The rate is for the complete item & the area of the sign board shall be measured for the purpose of payment.) |
| 85 | Fabricating & fixing aluminium work for doors, windows, ventilators & partitions etc reusing available dismantled aluminium extruded sections , particle board & glass panels etc all complete including supplying stainless steel screws & EPDM/neoprene rubber gasket wherever required, as per standard practice & finish & as per direction of Engineer-In-Charge (Cost of any additional aluminium section or particle board & glass panels wherever provided by the agency, the same is to be paid extra in respective basic item). |
| 86 | Supplying, installing and commissioning of one sided straight shape single seater modular office workstation cum table of size : 1500 mm (Length) X 700 mm (Width) X 750 mm (Height) with partition of height 300-450 mm above table top consisting of main frame made of 50X25 mm CRC M.S. rectangular pipe with minimum wall thickness 1.40 mm, under- structure support frame made of 25X50 mm CRC M.S. rectangular pipe with minimum 1.20 mm wall thickness for ensuring stability and strength. All M.S. members shall be properly welded, ground smooth and finished with rust-proof treatment followed by powder coating in approved shade. Table top shall be made of 25 mm thick High Density Moisture Resistant (HDMR) board finished with decorative laminate / mica pasted on top side. Exposed edges of HDMR top shall be finished with 2 mm thick PVC edge banding. Modesty panel up to height of 300-450 mm above table top starting from floor level, shall be made of 18 mm thick HDMR board with laminate finish on both faces. Wing panel or partition panel of width 1200 mm & height up to 300-450 mm above table top level starting from floor level shall be provided on both sides of each unit and it shall be made of 18 mm thick HDMR board with fabric finish or laminate finish on both sides. Workstation shall be provided with standard cable manager tray made of powder coated M.S. sheet for organized routing of electrical & data cables. Further, provision shall be made for wire manager gommet hole on table top for cable access. All hardware fasteners, screws and fittings shall be of best quality with proper alignment and finishing as approved by Engineer-in-Charge. Product must be sturdy, durable and suitable for office use. The Supplier has to give warranty for at least one year against manufacturing defects. (The rate is for one complete unit including cost of all materials, labor, carriage, lead, lift , installation charge & taxes etc all complete and nothing extra shall be paid on any account) |
| 87 | Supplying, installing and commissioning of modular wheel mounted three drawer pedestal of size 400 mm (width) X 500 mm (Length) X 650 mm (Height) with two equal size drawer and one file drawer made of 18 mm thick & 12 mm thick prelaminated MDF board duly fixed under the work surface. Drawers shall have channel arrangement for smooth operation with best quality stainless steel handle and locking arrangement. The Supplier has to give warranty for at least one year against manufacturing defects. (The rate is for one complete unit including cost of all materials, labor, carriage, lead, lift , installation charge & taxes etc all complete and nothing extra shall be paid on any account) |
| 88 | Supplying , installing & commissioning eco mesh chairs of IAFA (IAFA Furniture Pvt. Ltd ) or equivalent make, Item Name-RICO MB (Mid back) with center tilt mechanism, powder coated metal base / nylon base, fixed armrests, class 3 glass lift, castor wheels etc as per manufacturer's specification & as approved by Engineer-in-charge. The rate is for one complete piece including all materials, labour, carriage, lead, lift and installation charge & taxes etc. complete and nothing extra shall be paid on any account. |
| 89 | Supplying, installing and commissioning of 8-10 seating capacity Conference Table of size: 2400 mm (Length) X 1200 mm (Width) X 750 mm (Height) with table top made of 25 mm thick MDF board with premium quality decorative mica pasted finish top. Side panels and modesty panel shall be made of 18 mm thick High Density Moisture Resistant (HDMR) board with matching mica finish. All exposed edges shall be finished with PVC edge banding for smooth appearance and durability. Table shall be provided with cable manager box of standard make for wire management. Strong base support with full panel structure for individual leg room shall be provided to ensure stability. Finish, color and shade shall be as approved by Engineer-in-charge. The Supplier has to give warranty for at least one year against manufacturing defects. (The rate is for one complete unit including cost of all materials, labor, carriage, lead, lift , installation charge & taxes etc all complete and nothing extra shall be paid on any account) |
| 90 | Supplying , installing & commissioning premium leather chairs of IAFA (IAFA Furniture Pvt. Ltd ) or equivalent make, Item Name-MAXUS HB (High-back), Item Code-ICU044 with torsion bar mechanism, chrome plated metal base, chrome plated cushioned arms, class 3 gas lift, 60 mm castor wheels & leatherite upholstery etc as per manufacturer's specification & as approved by Engineer-in-charge. The rate is for one complete piece including all materials, labour, carriage, lead, lift,installation charge & taxes etc. complete and nothing extra shall be paid on any account. |
| 91 | Supplying , installing & commissioning premium leather chairs of IAFA ( IAFA Furniture Pvt. Ltd ) or equivalent make, Item Name-MAXUS MB (Mid-back), Item Code-ICU047 with torsion bar mechanism, chrome plated metal base, chrome plated cushioned arms, class 3 gas lift, 60 mm castor wheels & leatherite upholstery etc as per manufacturer's specification & as approved by Engineer-in-charge. The rate is for one complete piece including all materials, labour, carriage, lead, lift, installation charge & taxes etc. complete and nothing extra shall be paid on any account. Please Enable Macros to View BoQ information |