Indian Tenders

Tender Notice

TDR 55332967
Tendering Authority Agra Municipal Corporation
Tender No 10-04-2026/NAGAR NIGAM AGRA/12-05-2026/294
Tender ID 2026_DOLBU_1142691_1
Tender Brief Tender for Tender for Zone-1, Chhatta, Ward No. 60 Beautification Work For The Community Hall Located In Satya Nagar, Naraich.
City Agra
State Uttar Pradesh
Document Fees INR 1180 /-
EMD INR 143698.0 /-
Tender Value INR 14.36 Lakhs /-
Tender Type Tender
Bidding Type Open Tender
Competition Type Indian

Tender Details

Tender for Zone-1, Chhatta, Ward No. 60 Beautification Work For The Community Hall Located In Satya Nagar, Naraich.

Key Dates

Publish Date 04-05-2026
Last Date of Bid Submission 12-05-2026
Tender Opening Date 12-05-2026

Contact Information

Company Name Agra Municipal Corporation
Contact Person Chief Engineer
Address NAGAR NIGAM AGRA

BOQ Items

Name of Work:- tksu&1 NRrk d{k la[;k&60 ujk;p fLFkr lR; uxj esa lkeqnkf;d Hkou dk lkSan;Êdj.k dk dk;ZA
Sl. No. Item Description
1Providing and laying Cement Concrete in 1:5:10 (1 cement :5 fine sand 10 Stone ballast 40 mm gauges) and curing complete, including cost of form work in foundation and floors. (5-Chapter Sr.No.1)
212mm thick cement plaster in single coat of fair side of single of half brick wall for interior plastering up to floor two level including internal rounded angles chamfers and rounded angles not excluding 80mm in girth and finished even and smooth. No extra for mixing any additive.(c) 1 Cement : 4 Coarse sand.(Chapter No.13 Si.No.2)
3Finishing Wall Putty Aproved brand and manufacture and of required shade and undecorated wall surface to give and even shade over and including curing and cost of all material. (15-Chapter Si.No.27 New)
4Finishing walls with Acrylic Smooth exterior paint of required shade: New work (Two or more coat applied @ 1.67 Itr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) supply of all labour material and T&P required for proper completion of work. (Chapter No.15 Si.No.17)
5Supply and Fixing of Light Fitting Switch Board. (None Sheduled)
6Supply and Fixing Wiring of Light Point. (None Sheduled)
7S/L/J of 20mm dia PVC Cunduct Pipe etc. all complete.
8Supply & Fixing of wiring Sub Main.
9Supply & Fixing of Plug Point 15Amp.
10Supply & Fixing of 27watt. CFL etc. all complete.
11Lettering & Painting of wall etc. all complete.
12Supply & Fixing 1200mm Fan Bajaj/Crompton make etc. all complete. (Market Rate None Scheduled)
13Paint of the two coat over priming coat including cost of priming coat new steel gril etc. all complete.(15-Chapter Sr.No.1a+2a+642)
14R.c.c work with cement approved coarse sand and 2cm (3/4) gauge approved stone ballast in the proportion 1:2:4 in R.C.C Slab excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 bwgi binding wire and including necessary centring and shuttering etc. And also including supply of all materials labor and tools and plants etc. Required for proper completion of the work. Strength of the concrete shall not be less than M-150. (5-Chapter Si.No.8)
15Providing and Fixing PVC pipe conforming to ISI make working pressure 6 kg/Cm including testing labour T&P etc. all complete. 110mm diameter. (Chapter No.23 SI.No. 30(iii))
16Providing and laying D.P.C. 40cm. Thick with cement concrete consisting of one part cement 1.5 part of coarse sand and three part of approved 10mm grade stone grit and including water proofing material as directed by the engineer-in-charge in the proportion as specified by the manufacturer. {Chapter No.07 Si.No.361}
17Class-150 Brick Work in 1:4 Cement and Coarse Sand, mortar in foundation and plinth including supply of all materials, labor and tools and plants, etc. Required for proper completion of the work. ( Chapter No. 06 Sr.No. 2)
18Providing and Laying Vitrified Tiles 500x500mm Size (thickness 10mm), with water absorption less than 0.08% and conforming to IS:15622, of approved brand manufacture, in desired colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, including grouting of joints. Including 75mm thick base with concrte 1:4:8 complete as per E/I etc. all complete. (Chapter No.14 Sr.No.20)
19Supply and fixing 6mm (1/4\\") thick Chine white glazed tiles in flooring or dado laid with 1:3 cement and approved coarse sand mortar and approved coarse sand mortar finished with white cement jointed and polishing complete including supply of all materials, labor for porper completion of the work. (Chapter No.14 S.I. No. 628)
20Pro/iding and fxing lSl marked flush door shutters conforming to lS : 2202 (Part l) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.including ISI marked Stainless Steel butt hinges with necessary screws. (A) 35mm Thick. (Excluding cost of Flttings) (Chapter No.9 Si.No.1-9.21.1)
21Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm Sand Cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the wall and floors wherever required : White Vitreous China Orissa pattern W.C. pan of size 580x440 mm with with integral type foot rests. (Chapter No.24 SI. No.1)
22Providing and fixing water closet squatting pan (European type W.C. pan) with 100mm Sand Cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the wall and floors wherever required : White Vitreous China Orissa pattern W.C. pan of size 580x440 mm with with integral type foot rests. (Chapter No.24 SI. No.2)
23Providing and fixing wash basin with C.l. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets,cutting and making good the walls wherever require: (White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C. P. brass pillar taps) {Chapter No.24 Si.No.5A}
24Supply & Fixing of brass Bib Cock of heavy quality (Gem Mikado/Excess's Williams of eqv.) etc. all complete.15mm dia 400 gms (Chapter No.21 Si.No.43)
25Providing and fixing white vitreous china squatting plate urinal with Integral rim Longitudinal flush pipe. (Chapter No.24 Si.No.20)
26Providing and Fixing PVC pipe conforming to ISI make working pressure 6 kg/Cm including testing labour T&P etc. all complete.140mm diameter. (Chapter No.23 SI.No. 30(iv))
276mm thick Celling plaster 1:3 (1 cement :3 fine sand) cement & fine sand in F.M not less than 1.25, 1:3 including chipping of RCC surface before celing plaster. The cost of including at material, labor T&P and scafolding etc complete. (Chapter No.13 Si.No.13)
28Constructing brick masonary chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 Cement : 4 Coarse Sand) C.I. cover with frame (light duty) 455x610mm Internal dimensions, total weight of cover with frame to be not less than 38kg (weight of cover 23kg and weight of frame 15kg), R.C.C. top slat with 1:2:4 mix (1 Cement : 2 Coarse Sand : 4 graded stone aggregate 20mm nominal size), foundation concrete 1 :5:10 (1 Cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size), inside plastering 12mm thick with cement mortal 1:3 (1 Cement : 3 Coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard desing: (a) Inside dimensions 455x610mm and 45cm deep for single pipe line : With Common burnt clay F.P.S. (non modular) bricks of class designation M-150). {Chapter No.25 Si.No.6a)
29Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam (22.40-53mm) specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density.
30Supply and laying of Shaped precast Interlocking tiles of thickness 60mm thick Rubber Molded Gray (Compressive strength not less then 30Mpa and weight 4.50kg) Including 25mmn thick local sand base levelling and dressing of surface to required level and slope etc., interlocking bricks will be as description given in direction issued by the IRCSC-03-2004 and should be ISI marked all complete. (Tiles shape decided by Engineer-in-charge with ISI Mark) {Chapter No.20 Si.No.17(b)}
31Supply & Fixing 1000 Leter P.V.C. Sintex Water Tank Supply of all material etc. all complete. (None Scheduled)
32Supply & Fixing Granite Stone Work Display Board (Size 2.50ft x 4.00ft) including Painting, Lettering etc. all complete. (None Schedule)
33Sub Total
34Add/Deduction Rs. For Estimate Figure Amount Match
35Grand Total Please Enable Macros to View BoQ information

Other Detail

Information Source https://etender.up.nic.in
Download FileName File Description File Size
Download 25efce10-6a45-4aae-a916-7be5bd111df5.html Tender Documents 0 KB
Download BOQ_2139489.xls Tender Documents 0 KB
Download Tendernotice_1 (15).pdf Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.