|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m., All kinds of soil.DSR 2023- 2.8.1 |
| 2 | Cartage of surplus earth/malva up to 5 Km distance including loading and unloading.SOR-231(a) |
| 3 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50m outside the periphery of the area cleared.DSR 2023- 2.31 |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :, 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources).DSR 2023- 4.1.8 |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :, 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).DSR 2023- 4.1.2 |
| 6 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required., In gratings , frames, guard bar , ladder, railings , brackets , gates and similar worksDSR 2023- 10.25.2 |
| 7 | Mild steel or iron work in plain work such as in R.C.C. or R.B. (when not included in an over all rates ) including bending for proper completion of the work and including supply of steel and its wastage , bends, hooks and authorised overlaps shall be measured up to floor two level. (SI No. 504) (Sanction Rate) PSR |
| 8 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:, Cement mortar 1:4 (1 cement : 4 coarse sand)DSR 2023- 6.1.1 |
| 9 | 12 mm cement plaster of mix :, 1:4 (1 cement: 4 coarse sand)DSR 2023- 13.4.1 |
| 10 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR 2023- 13.80 |
| 11 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:, New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) DSR 2023- 13.47.1 |
| 12 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:, Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. (for Wood work with primer) DSR 2023-13.62.1 |
| 13 | SF of FRP DAKOCO vpes big size designer dustbin of approved quality approved by El etc made of polycorbonate or equvalent materials with including differont otourtull colours of 3X1/2*X2\\" dia size etc including cartage of dustbin contractor their won sources etc including supply of all materials T &P all complete work (S/R) |
| 14 | 'Supply & fixing of MS benches including cost of benches (shape & size attached with estime) fixing the wave slide including excavation PCC 1:4:8 cement coarse sand & 40 mm nominal grit with CC 1:2:4 cement coarse sand & 20 mm gauge stone grit including all material & labour required fixing and orienting etc all complete under the direction of the E'/I. Sanction Rate |
| 15 | Supply & fixing of wave slide (m) four seater SD-05B (height6\\") including cost of| wave slider (shape & size attached with estime) fixing the wave slide including excavation PCC 1:4:8 cement coarse sand & 40 mm nominal gnt with CC 1:2:4 cement coarse sand & 20 mm gauge stone gnit including all material & labour equired fìng and onienting etc all complete under the direction of the Engineer.S/R |
| 16 | |Supply & Fixing of Swing 4 seater SW-2 including cost of swing seater (shape & size attached witth estime) fixing the swing seater including excavation PCC 1:4:8 cement C0arse sand & 40 mm nominal gnt with CC 1:2:4 cement coarse sand & 20 mm gauge stone gnt incduding all material & labour required fixing and onenting etc all complete under the direction of the EN, Sanction Rate |
| 17 | CHEST PRESS DIMENSIONS: PRODUCT AREA:3.6 FT X 2.8 FT SAFE PLAY AREA :7.6 FT X 6.8 FT FUNCTIONS: STRENGTHENS GLUTES, CHEST, SHOULDER. UPPER & MID ABS, FORE ARM & TRICEPS TECHNICAL SPECIFICATIONS: CENTER FRAME: 100 NB GI C-CLASS PIPE-JINDAL MAKE MAIN FRAME: 40 NB & 32 NB GI B-CLASS PIPE JINDAL MAKE HANDLE FRAME: 32 NB & 25 NB GI B-CLASS PIPE-JINDAL MAKE CONNECTING PIPE: 32 NB & 25 NB & 40 NB GI B-CLASS PIPE- JINDAL MAKE SEAT & BACK REST: LLDP ROTOMOULDED SEAT WITH INBUILT BOLTS 3/8\\" X 1.5\\". PIPE CAP: GALVANISED CAP. BEARING SYSTEMS: SELF LOCKING BEARING SYSTEMS. IT WILL RESTRICT ITS MOVEMENT IN 120° ANGLE. BEARING HOUSING AND PIN SEAMLESS PIPE & ROUND BAR BEARINGS: REPUTED MAKE (FAG/SKF) NUT BOLTS: GALVANISED NUT BOLTS NUT BOLTS CAP: NYLON 66 INJECTION MOULDED WITH SS M6 S/R. |
| 18 | Supplying and Fixing of Shoulder Press Double double outdoor excercise equipment (Model No.PGOFT 24, Make Arihant/Kompain/ Funplay) including necessary fittings, T&P etc all complete in direction of engineer in charge. PSR-1018 |
| 19 | CYCLE DIMENSION: PRODUCT AREA: 3.2 FT X 2.2 FT SAFE PLAY AREA:7.2 FT X 6.2 FT FUNCTIONS: STRENGTHEN UPPER & LOWER LIMB, IMPROVES BODY CONSISTENCY & EGIBILITY, IMPROVE LUNGS & HEART EFFICIENCY AND STRENGTHENS HEART. TECHNICAL SPECIFICATIONS: MAIN FRAME: 25 NB & 40 NB GI B-CLASS PIPE -JINDAL MAKE SEAT FRAME: 32 NB GI B-CLASS PIPE-JINDAL MAKE HANDLE & SEAT: LLDPE STERING IS USED PIPE CAP: GALVANISED CAP. BEARING HOUSING AND PIN SEAMLESS PIPE & ROUND BAR NUT BOLTS: GALVANISED NUT BOLTS. BEARINGS PERMANENT SEALED OF REPUTED MAKE (FAG/SKF) POWDER COAT: DONE BY FIRST COAT OF PRIMER BRAND 40-50 MICRON THICKNESS AND TOP COAT OF PURE POLYESTER POWDER WITH 70-80 MICRON THICKNESS. TOTAL THICKNESS IS 110-120 MICRON COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN-CHARGE. S/R |
| 20 | \\"PROVIDING AND FIXING OF FUN ROWER FUNPLAY FNF 003 HAVING DIMENSION: • PRODUCT AREA : 4.7 FT X 2.5 FT • SAFE PLAY AREA : 8.7 FT X 6.5 FT • AGE GROUP: 13 ABOVE YRS. FUNCTIONS: STRENGTHENS BACK MUSCLES, SHOULDER ARM MUSCLES AND ABDOMEN, ALSO IMPROVES CARDIO VASCULAR ENDURANCE. TECHNICAL SPECIFICATIONS: MAIN FRAME: 80 NB GI B-CLASS PIPE JINDAL MAKE SEAT FRAME:50 NB GI B-CLASS PIPE -JINDAL MAKE HANDLE FRAME:32 NB GI B-CLASS PIPE -JINDAL MAKE PIPE CAP: GALVANISED CAP. BEARING CAP: NYLON 66 INJECTION MOULDED. BEARING SYSTEMS: SELF LOCKING BEARING SYSTEMS. IT WILL RESTRICT ITS MOVEMENT IN 120° ANGLE BEARING HOUSING AND PIN: SEAMLESS PIPE & ROUND BAR NUT BOLTS: GALVANISED NUT BOLTS BEARINGS:PERMANENT SEALED OF REPUTED MAKE (FAG/SKF) POWDER COAT: DONE BY FIRST COAT OF PRIMER – JOTUN BRAND 40-50 MICRON THICKNESS AND TOP COAT OF PURE POLYESTER POWDER WITH 70- 80 MICRON THICKNESS. TOTAL THICKNESS IS 110-120 MICRON COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN-CHARGE. sanction rate attached. PSR |
| 21 | PROVIDING AND FIXING OF AIR WALKER DIMENSION: PRODUCT AREA :4.8 FT X 2.1FT SAFE PLAY AREA :8.8FT X 6.1FT AGE GROUP: 13 ABOVE YRS. FUNCTION: STRENGTHENS LEG MUSCLES, IMPROVES CARDIO VASCULAR ENDURANCE TECHNICAL SPECIFICATIONS: MAIN FRAME: 100 NB GI C-CLASS PIPE-JINDAL MAKE LEG FRAME: 32 NB GI B-CLASS PIPE-JINDAL MAKE HANDLE FRAME: 25 NB GI B-CLASS PIPE -JINDAL MAKE FOOT REST: LLDP ROTOMOULDED SEAT WITH INBUILT BOLTS 3/8\\" X 1.5\\". PIPE END CAP: GALVANISED CAP. BEARING HOUSING AND PIN: SEAMLESS PIPE & ROUND BAR BEARING SYSTEMS: SELF LOCKING BEARING SYSTEMS, IT WILL RESTRICT ITS MOVEMENT IN 120° ANGLE. NUT BOLTS: GALVANISED NUT BOLTS, BEARINGS: PERMANENT SEALED OF REPUTED MAKE (FAG/SKF) POWDER COAT DONE BY FIRST COAT OF PRIMER - JOTUN BRAND 40-50 MICRON THICKNESS AND TOP COAT OF PURE POLYESTER POWDER WITH 70-80 MICRON THICKNESS, TOTAL THICKNESS IS 110-120 MICRON COMPLETE IN ALL RESPECT AS DIRECTED BY ENGINEER-IN-CHARGE Sanctioned Rate. PSR-563 |
| 22 | Supplying and Fixing of Four Seater Swing with sparrow outdoor playing equipment including necessary fittings, T&P etc all complete in direction of engineer in charge. (Model No. FPSW 10, Make Fun Play/ Kompain/ Arihant) S/R |
| 23 | Supplying and Fixing of Standered Multi seater See Saw outdoor playing equipment including necessary fittings, T&P etc all complete in direction of engineer in charge. (Model No. FPSS12, Make Fun Play/ Kompain/ Arihant). S/R |
| 24 | Supplying and Fixing of Turbo Tower outdoor playing equipment including necessary fittings, T&P etc all complete in direction of engineer in charge. (Model No. FPCL35 , Make Fun Play/ Kompain/ Arihant). S/R |
| 25 | Supplying and Fixing of Monkey Climber outdoor playing equipment including necessary fittings, T&P etc all complete in direction of engineer in charge. (Model No. FPCL43, Make Fun Play/ Kompain/ Arihant) |
| 26 | Supplying and Fixing of Balancing Bridge outdoor playing equipment including necessary fittings, T&P etc all complete in direction of engineer in charge. (Model No. FPTH41, Make Fun Play/ Kompain/ Arihant) |
| 27 | Supplying and Fixing of Four Seater Merry Go Round Outdoor Playing Equipment Including Necessary Fittings, T&P etc all Complete in Direction of Engineer in Charge. (Model No. FPMR11, Make Fun Play/ Kompain/ Arihant) Rate 50756.00 |
| 28 | Supplying and Fixing of 7' Ht. FRP Wave Slide outdoor playing equipment including necessary fittings, T&P etc all complete in direction of engineer in charge. (Model No. FPSD51, Make Fun Play/ Kompain/ Arihant) PSR |
| 29 | Supplying and Fixing of Frog Bin - FRP outdoor playing equipment including necessary fittings, T&P etc all complete in direction of engineer in charge. (Model No. FPDB11, Make Fun Play/ Kompain/ Arihant) |
| 30 | Supplying and Fixing of Imperial Bench 4' outdoor playing equipment including necessary fittings, T&P etc all complete in direction of engineer in charge. (Model No. FPGD11, Make Fun Play/ Kompain/ Arihant) |
| 31 | G.I OCTAGONAL POLE Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, found SOR 2018 (E-M)- 6.641 |
| 32 | Chequerred precast cement concrete tiles 22 mm thick in footpath &courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand)., Medium shade pigment using 50% white cement 50% Grey cement. DSR 2023- 11.20.2 |
| 33 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. DSR 2023- 16.83 |
| 34 | Construction of granular sub-base by providing coarse graded material, spreading in uniform layer with motor graded on perpared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratoy roller to achieve the desired density complete as per clause 401. for grading I material (GSB-1) (Sanction rate) PSR-1001 |
| 35 | Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineer in-Charge., 80mm thick Cement concrete paver block of M-30 grade with approved colour, design & pattern. DSR 2023- 16.91.2 |
| 36 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. DSR 2023- 15.56 |
| 37 | Supply and fixing of 60w all in one led solar street light system consisting of mono crystalline pv panel. PSR Please Enable Macros to View BoQ information |