Name of Work:- tuin xkSrecq)uxj ds vUrxZr xzke iapk;r [kaxkSM+k esa cPpksa dh fk{kk O;oLFkk gsrq iqLrdk y; dk fuekZ.k dk;ZA | Sl. No. | Item Description | |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. All kinds of soil cum 177.50 DSR 2.6.1 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. cum 196.00 DSR 2.25 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 3 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. cum 2123.75 DSR 2.27 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 4 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) cum 6812.00 DSR 4.1.8 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) cum 8340.85 DSR 4.1.2 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 6 | Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns sqm 392.15 DSR 4.3.1 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 7 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 4.2.2 1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). cum 10357.55 DSR 4.2.2 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 8 | Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. sqm 842.50 DSR 4.3.2 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 9 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) cum 9344.35 DSR 6.4.1 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 10 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:3 (1 cement :3 coarse sand) sqm 1150.50 DSR 6.13.1 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 11 | Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources).DSR 4.11 SQM 495.75 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 12 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars kg 107.10 DSR 5.22.1 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 13 | Providing and fixing bright /matt finished Stainless Steel Sliding Door Bolt of approved quality & make with necessary screws etc all complete. 250x16 mm. Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 14 | Providing and fixing bright /matt finished Stainless Steel Sliding Door Bolt of approved quality & make with necessary screws etc all complete. 300x16 mm. Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 15 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10 mm each 441.60 DSR 9.74.1 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 16 | Providing and fixing bright finished brass handles with screws etc. complete: 125 mm each 256.65 DSR 9.81.1 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 17 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) 150x10 mm each 59.45 DSR 9.63.3 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 18 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) 125 mm each 39.95 DSR 9.66.1 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 19 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws sqm 3167.95 DSR 9.20.2 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 20 | Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). 9.18.1 18 mm thick sqm 1245.75 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 21 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding kg 219.10 DSR 9.48.1 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 22 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Float glass panes 9.7.7.2 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm). sqm 2600.45 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 23 | Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) kg 195.20 DSR 10.15.1 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 24 | Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. 10.29.2 Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides sqm 1133.55 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 25 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with f ire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. meter 570.95 DSR 9.121 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 26 | 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge. SQM 4488.95 DSR 9.122.2 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 27 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). kg 772.40 DSR 10.28 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 28 | 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand) sqm 399.45 DSR 13.2.1 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 29 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) sqm 347.05 DSR 13.1.1 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 30 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. sqm 1439.40 DSR 11.40 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 31 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 500x500 mm sqm 1524.30 DSR 11.41.1 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 32 | Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick metre 91.75 DSR 11.13.1 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 33 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm sqm 193.70 DSR 13.48.1 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 34 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. sqm 156.05 DSR 13.80 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 35 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture sqm 226.25 DSR 132.62.1 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 36 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: Stainless Steel AISI-304(18/8) Orissa pattern W.C. pan of size 585x480 mm with flush pipe and integrated type foot rests each 11390.95 DSR 17.1.2 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 37 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked black solid plastic seat and lid each 6383.25 DSR 17.2.2 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 38 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps each 2648.85 DSR 17.7.1 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 39 | Providing and fixing P.V.C. waste pipe for sink or wash basin including 32 mm dia each 119.55 DSR 17.28.2.1 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 40 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm each 1361.80 DSR 17.32.2 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 41 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. each 1083.50 DSR 17.33 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 42 | Providing and fixing soil, waste and vent pipes : 100 mm dia Sand cast iron S&S pipe as per IS: 1729 metre 1151.90 DSR 17.35.1.1 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 43 | Providing and fixing heel rest sanitary bend100 mm dia Sand cast iron S&S as per IS - 1729 each 584.25 DSR 17.40.1 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 44 | Providing and fixing plain bend of required degree. 100 mm dia Sand cast iron S&S as per IS - 1729 each 470.45 DSR 17.39.1 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 45 | Providing and fixing terminal guard : 100 mm Sand cast iron S&S as per IS - 1729 each 442.00 DSR 17.56.1.1 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 46 | Providing and fixing collar : 100 mm Sand cast iron S&S as per IS - 1729 each 463.35 DSR 17.57.1.1 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 47 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : 100 mm each 622.50 DSR 17.58.1 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 48 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet Sand cast iron S&S as per IS: 3989 each 1996.50 DSR 17.60.1.1 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 49 | Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms. each 713.20 DSR 17.74 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 50 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. each 708.95 DSR 17.73.2 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 51 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes metre 537.60 DSR 18.8.2 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 52 | 25 mm nominal dia Pipes metre 627.25 DSR 18.8.3. Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 53 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 18.17.1A 20 mm nominal bore each 539.95 DSR 18.17.1A Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 54 | Providing and fixing uplasticised PVC connection pipe with brass unions : 18.21.1 30 cm length 18.21.1.2 20 mm nominal bore each 93.55 DSR 18.21.1 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 55 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore each 798.95 DSR 18.51.1 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 56 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 18.53.1 15 mm nominal bore each 574.30 DSR 18.53.1 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 57 | Providing and fixing PTMT grating of approved quality and colour. Circular type 18.58.1.1 100 mm nominal dia each 37.60 DSR 18.58.1 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 58 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. per litre 11.00 DSR 18.48 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 59 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 19.4.1 100x100 mm size P type 19.4.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 each 2707.65 DSR 19.4.1.1 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 60 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :19.7.1 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 each 12770.55 DSR 19.7.1.1 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 61 | 0362 Brick bats cum 525.0 DSR 0362 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 62 | Lettering with black Japan paint of approved brand and manufacture per letter per cm height 6.15 DSR 13.71 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 63 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. 8.2.1 Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble 8.2.1.1 Area of slab upto 0.50 sqm sqm 3414.80 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 64 | Almirah(LumSum Rate) Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 65 | Table(Lumsum Rate) Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 66 | Chair(Lumsum Rate) Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 67 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. dsr no.1.10.1 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 68 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire dsr no 1.14.1 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 69 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire dsr no 1.14.2 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 70 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 4 X 10 sq. mm + 2 X 6 sq. mm earth wire. Dsr no 1.14.10 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 71 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. Dsr no 1.31 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 72 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. dsr no 1.32 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 73 | Supply and fixing of LED Tube Light batten fitting suitable for up to 1 X 36 watt LED tube light on surface complete in all respect. dsr no.8.9.7 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 74 | Supply and fixing of recess/Surface/Pendent mounting round 12 Watt to 15Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect dsr no 8.2.3 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 75 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00,Air deliveryminimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase ACSupply, earthing etc. complete as required. dsr no 9.1.3 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 76 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. Dsr no 1.25 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 77 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. 4 way (4 + 12), Double door dsr no 2.5.1 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 78 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double pole dsr no 2.10.3 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 79 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. Dsr no 2.11 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 80 | Supplying and fixing following capacity TP&N 160A disconnector fuse switch unit inside the existing board as required dsr no 2.1.5 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 81 | Supplying and fixing following capacity TP&N 400A disconnector fuse switch unit inside the existing board as required dsr no 2.1.8 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 82 | upplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) DSR 5.9 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. | | 83 | Supply and burring of Safe Earthing pipe 4.5m long ,40mm dia including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc.with charcoal/ coke and sait as required…all complete. Dsr no 5.2 Including cost of, all material, labour, T&P, royality , all taxes and labour cess complete. But excluding GST. Please Enable Macros to View BoQ information |
|