|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual mcans in foundation trenches or drains (not excceding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. The contractor has to detcet different utilitys like sewer line, water supply line, Electric cable, Telephone cablc, Gas Pipe etc. using utility detecting machine before start of excavation and shall start excavation only after getting permission or Engineer in Charge. All kirds of soil. DSR-18/I.No.2.8.1 |
| 2 | Filling avilable excavated earth (excluding rock) in trenches, plinth, side of foundation etc, in layers not exceeding 20 cmm depth, consolidating each deposited Cum layer by ramming and watering, lead up to 50 and lift upto 1.5 m. Item N.2.25 |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work up to plinth 1:4:8 ( 1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size) DSR-18/I.NO. 4.1.8 |
| 4 | Reinforced cement concrete work in beams, suspended floors roofs having slope up to 15 degree landings balconies shelves chajjas lintels bands plain window sills staircases and spiral stair cases above plinth level up to floor five level excluding the cost of centering shuttering finishing and reinforcement with 1:1.5:3(1 cement: 1.5 coars sand ( zone- III ) : graded stone aggregate 20 mm nominal size ) I.NO. 5.3 |
| 5 | Centring and shuttering including strutting, propping etc. and removal of form work for. Foundation, footings, basesof Columns etc for mass concrete.I.NO.5.9.1 |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access, platform DSR 18/I.No. 5.9.3 |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers. DSR-18/1.No. 5.9.5 |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete. Columns, Pillars, Piers, Abutments, Posts and Struts. Item No. 5.9.6 |
| 9 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-mechanically treated bars of grade Fe-500D or more. DSR-18/I.NO.5.22.6 |
| 10 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 100 in foundation and plinth inCement mortar 1:4 (1 cement : 4 coarse sand) DSR No. 6.1.1 |
| 11 | Brick work with FPS bricks of class designation 150 in super structure above plinth level upto floor V level in all shapes and sizes in : cement mortar 1:4 (1 cement : 4 coarse sand) DAR CODE - 6.4.1 |
| 12 | Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. DSR 18/1.No. 10.25.2./P- |
| 13 | Providing and fixing aluminium tower bolts (BARREL TYPE) 300x10 mm 9.97.1 |
| 14 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 300x16 mm :(DSR-18/1-9.96.1) |
| 15 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete: 125 mm DSR-18 I.No.9.100.1 |
| 16 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Single rubber stopper DAR/18 I.no. 9.101.1 |
| 17 | Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete. |
| 18 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 60x60 cm. DSR/I. no. 11.41.2 |
| 19 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. DSR 18/1.No. 8.31 |
| 20 | Water proofing treatment with bitumen felt (fiber base self finished bitumen felt) |
| 21 | 10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25mm thick mud mortar with bhusha at 35kg per cum of earth and gobri leaping with mix 1:1 (1 clay:1 cow-dung) and covered with machine moulded tile bricks of class designation 125 conforming to IS : 2690 (Part 1) -1992 grouted with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat. with machine moulded common burnt clay F.P.S ( non modular) brick tiles of class designation 12.5, conforming to is 2690. item no. 12.17.1 DSR 2018 |
| 22 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design :In 75x75 mm deep chase (DSR-18/I-12.21.1/P-189). |
| 23 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (DSR-18/1-12.22 |
| 24 | 12 mm cement plaster of mix : 1:4 (1 cement : 4 coarse sand) (DSR-18/I-13.4.1/P-222) |
| 25 | Distempering (first coat) with oil bound distemper of approved brand and manufacture and of required shade on undercorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N, Shalimar Asian Paint after thoroughly brushing the surface free from mortar dropping and other foreign matters and also including the surface even with plaster of paris or approved synthetic materials and sand papered smooth including supply of all materials labour Tools & plants etc required for proper completion of the work.SOR I.NO. 15.09 649 |
| 26 | Painting with synthetic enamel paint of approved brand and manufacture of required to colour to give an even shade. Two or more coat on new work. (DSR 2018 I.No.13.61.1/P-227) |
| 27 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. DSR 18/I.No. 17.1.1/P-287 |
| 28 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.l. brackets, 40mmflush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. DSR-18/I.no- 17.2.1 |
| 29 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.l clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required.Range of two urinal basins with 5 litre white P.V.C.automatic flushing cistern |
| 30 | Providing and fixing wash basin with C.l. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow including operated levers. DSR/I. no. 17.7.8 |
| 31 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P brass screws and washers complete. I.No.17.31 |
| 32 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i.e. fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal outer dia Pipes. DAR CODE - 18.9.1 |
| 33 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931: 15 mm nominal bore. DSR 18/I.No. 18.49.1/ |
| 34 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. : 15 mm nominal bore. DSR/l. no. 18.52.1 |
| 35 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore 15mm nominal bore. DSR 18/I.No. 18.53.1/P-301 |
| 36 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore. DSR/I. no. 18.17.1 |
| 37 | P/F uplasticsed PVC connection pipe with brass unions : 45cm length 15mm nominal bore. DSR I.No:18.21.2.1 |
| 38 | Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0 56m dia at top in cement mortar 1:4 (1 cement: 1 coarse sand), inside cement plaster 12 mm thick with cement mortar 13 (1 cemont: 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3.6 mix (1 cement: 3 coarse sand: 0 graded stone aggregato 10 mm nominal sizo), and making necessary channel in cement concreto 12:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design 0.01 m deep with S.F.RC cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I S 12592, total weight of cover and frame to be not less than 182 kg fixed in cement concrete 1:24 (1 cement: 2 coarse sand: 4 graded stone aggregato 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) : With common burnt clay F.P.S. (non modular) bricks of class designation 10 (DSR Code No -19,9.1.1) |
| 39 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter. DSR 18/I.No. 12.41.1 |
| 40 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR/I. no. 18.48 |
| 41 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. DSR-18/I.No.15.3 |
| 42 | Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar ,DSR-2018/I.no. 15.7.4 |
| 43 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. DSR 18/I.No. 9.21.1/P-151 |
| 44 | Supplying and fixing rolling shutters of approved make made of required size M S laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets side guides and arrangements for inside and Outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springsmanufactured from high tensile steel wire of adequate strength conforming to IS 4454 part 1 and MS top cover of required thicknessfor rolling shutters 80x1 26 mm MS laths with 1 26 mm thick top cover DSR-18/10.6.2 |
| 45 | Prdy corrugated G.S. sheet roofing excluding the coat of purling, raitora and trusses- 1.00mm thick with zinc. Item code - 12.1.1 Please Enable Macros to View BoQ information |