|
| 1 | Excavation in foundation in ordinary soil, loam, clay or sand including lift upto 1.5m & lead upto 30m including filling watering & ramming of excavated earth into the space between the building & the siides of foundation trenches or into the plinth removal & disposal of surplus earth as directed by the engineer in charge upto a distance of 30m from the foundation trenches SI. No. 251 |
| 2 | Concrete with 4 cm gauge brick ballast, fine sand and cement in proportion of 12:6:1 in foundation including supply of all materials labour and T& P etc required for proper completion of the work.( S.I.No. 273) |
| 3 | First class Brickwork in 1:6 cement and coarse sand mortar in foundation & plinth includiiing supply of all materials labour T & P etc. required for proper completion of work as per SI.No. 303 |
| 4 | RCC work with cement, approved coarse sand and 2cm gauge approved stone ballast in proportion of 1:1.5:3 in RCC column SI.No. 289 |
| 5 | RCC work with cement, approved coarse sand and 2cm gauge approved stone ballast in proportion of 1:1.5:3 in P/L beam SI.No. 283(a) |
| 6 | First class Brickwork in 1:4 cement and coarse sand mortar in Super Structure including supply of all materials Labour T&P etc. required for proper completion of work as per SI.No. 305+309+310 |
| 7 | RCC work with cement, approved coarse sand and 2cm gauge approved stone ballast in proportion of 1:1.5:3 but in verandha beam SI.No. 285 |
| 8 | RCC work with cement, approved coarse sand and 2cm gauge approved stone ballast in proportion of 1:1.5:3 but in T beam SI.No. 288 |
| 9 | First class Brickwork in 1:4 cement and coarse sand mortar in Super Structure including supply of all materials Labour T&P etc. required for proper completion of work as per SI.No. 305+309+310(a) |
| 10 | RCC work with cement, approved coarse sand and 2cm gauge approved stone ballast in proportion of 1:1.5:3 in Slab SI.No. 284(a) |
| 11 | Mild Steel or iron work in plane work such as reinforced concrete for reinforced brickwork (when not included in an over all rates) wrought to required shape as necessary includeing bending for proper completion of the work and including supply of all steel and wastage and over lapping & hooks SI.No 504 |
| 12 | First class Brickwork in 1:4 cement and coarse sand mortar in foundation & plinth includiiing supply of all materials labour T & P etc. required for proper completion of work as per SI.No. 305 |
| 13 | 2.5 cm thick plain C.C. floor 1:2:4 with cement c/sand and 20 mm gauge stone ballast in panel finished with 3mm floating coat of neat cement over 8 cm base conc. 1:4:8 , 40 mm S/grits including all complete SI.No. 601 |
| 14 | Cement Concrete with 2cm gauge approved stone ballast, coarse sand & cement in proportion of 4:2:1 including supply of all materials labour T&P comp SI.No. 279(I) Hold and fast |
| 15 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.dsr N010.5.1 |
| 16 | Mild steel or iron work of small size and section such as fabrication grill in door, window, ventilator including cost of hinges as per SI.No. 502-C |
| 17 | Mild steel or iron such as in heavy size trusses, builtup gates, door frame incl. all complete as per SI.No 503 |
| 18 | 12 mm cement plater in 1:3 with cement amd coarse sand mortar in single coat on fair side of single or half brick wall for interior plastering upto 2 level i/c internal rounded angles champers and or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. As per SI.NO.583 |
| 19 | 12 mm cement plater in 1:6 with cement amd coarse sand mortar in single coat on fair side of single or half brick wall for interior plastering upto 2 level i/c internal rounded angles champers and or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. As per SI.NO.586 |
| 20 | Engrewing line in the plaster of outer surface vertically and Horizantally to display the surface (Forming Grooves of uniform size) ncluding all comp SI.No. 598 |
| 21 | Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth completeChap 15 New Item 13.26 |
| 22 | Earth Work in filling in ordinary soil with 1.50 mt, & 30.00 mt lead including lab T&P all complete with 3.0 km cartege As per SI.No. 253 |
| 23 | Sand filling in plinth i/c supply of necessary quantity of sand from a distance not exceeding 8 km from the site of work and including watering, dressing etc including all mateials, labs T&P complete as per SI.No. 255 |
| 24 | P/L of Vctrified floor tiels in different sizes (thickness to be specified by the manufacturer ) with water absorption's less than 0.8% and conforming to IS:15622 of approved make in all colours and shades ,laid on 20m.m thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc.,complete As per S.NO. Chp.14 D.S.R 11.41 |
| 25 | S/F 6mm china white glazed tile in flooring or skirting dado with 1:3 cement & coarse sand mortar finished with white cement slurry joining and polishing complete all materiall T&P as per SI.No. 628 |
| 26 | Two coat painting over 1 coat primer including lab T&P all comp SI.No. CH 15 New Item 1+2+4(ii) |
| 27 | Three coat with oil bound distemper over one coat primer including all complete SI.No. 649+650 |
| 28 | Finishing of walls with acrylic smooth paint of required shade over new work include base coat of water proffing cement paint i/c all material ,labour andT&P as per S.I. 13.46.1 |
| 29 | S/F of 10 cm internal dia A.C. down pipe complete with bends including supply of M.S. Clamp 2.5 cm X 3 mm fixed to wall & 15 cm Long wall Incl. T&P all comp. SI.No 730 |
| 30 | Brick Soling with S.O.B Laid the flat and dray including preparation of subgrade to prescribed chamber and including supply of bricks pwd SI 762(a) |
| 31 | Brick Soling with S.O.B Laid on edg and dray including preparation of subgrade to prescribed chamber and including supply of bricks pwd SI 762( b) |
| 32 | S/F of Informative sign of 1.20 X 0.90 mtrs as driected br Er. Incharge also fixing in Proper position comp. at site |
| 33 | Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in-charge.DSR 16.60 |
| 34 | Wiring point for light 1.5 sq. mm. FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe concealed in the wall, complete .Light Points (131C-187A) |
| 35 | same above item Fan Points (133C-187A) |
| 36 | same above item 5 Amp Plug (134C 187-C) |
| 37 | S/F of Hexagonal fan box with 1.00 MM Thick sides of fabrication from 16 SWG M.S. Sheet SI.No. 1149 |
| 38 | Supply and fixing of power plug with 20 Amp./250 volt flush type modular switch and 5 pin 20 A 250 volt flush type universal modular socket switch on concealed MS box including supply of all material. labour T&P etc. required for proper completion of work. (1139) |
| 39 | S/F surface/flush mounting spn distrbution board without mcb item no 1022(a) cate A |
| 40 | S&F of 6 Amp to 32 Amp. SPMCB (1002,CAT B) |
| 41 | Supply and fixing of electronic fan regulator Modular) 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer in charge of work (1203C) |
| 42 | Supply and fixing of LED Tube Light butten fitting suitable for up to 1 X 22 watt LED tube light on surface complete in all respect (1413A CAT AAA) |
| 43 | Basic Price for 1200 mm sweep BLOC Ceiling fan i/c all accessories/fittings/ supports etc. DSR 4400 |
| 44 | Instaling, Testing and commissioning of ceiling fan, including the down roads including and providing fixing phenolic laminated sheet cover on the fan box etc. DSR 1.45 |
| 45 | SF of PVC Pipe 100mm dia including all complete.Chapter-1 item N0 24 |
| 46 | SF of PVC bend 100 mm dia including all complete DSR Item N0 |
| 47 | Providing and placing on tarees polithene water storage tank as per DSR 18.48. |
| 48 | P/F of Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing -Concealed work, including cutting chases and making good the walls etc.15 mm nominal dia Pipes DSR 18.8.1 |
| 49 | 20 mm nominal dia Pipes DSR 18.8.2 |
| 50 | PF of white vetreous china Orissa pattern w.c pan of size 580x440 mm & foot rest intrigal type complete of work as per DSR 17.1.1. |
| 51 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 dsr 18.53.1 |
| 52 | PF of white vetreous china Flat back wash Basin of size 630X450 mm complete of workas per DSR 17.25.1 |
| 53 | PE of CP. hrass bib cock of 15mm dia nominal bore........ including all complete of work as per DSR 18.49 1 |
| 54 | PF of CP brass long body bib cock of 15mm dia nominal bore........ including all complete of work as per DSR 18.51.1. |
| 55 | PEof CP brass Stop cock of 15mm dia nominal bore... including all complew of work as per DSR 18.52.1. |
| 56 | Boring 150 mm dia bore hole including labour T&P etc.required for proper completion of the work (as per Manpuri pwd SOR) |
| 57 | Lowering 110 mm dia PVC Pipe in hole including labour and T&P etc. required for proper completion of the work (as per Manpuri pwd SOR) |
| 58 | Providing and fixiing of 110 mm dia PVC pipe 6 kg/cm² (as per Manpuri pwd SOR) |
| 59 | souronding and packing graded coarse sand in between bore wall & the strainer including supply of coarse sand labour and T&P etc. required for proper completion of the work |
| 60 | Providing and fixiing G.I .Pipe 32 mm dia Nominal bore complete with G.I.Fitting (DSR 18.12.3) |
| 61 | submersible pump kirloskar / Crompton or equvalant 1.00 H.P.I.S.I Mark |
| 62 | Sigle Phase starter for submersible of I.S.I marked (as per Manpuri pwd SOR) |
| 63 | 2.50 mm sqr. Cable for submersible motar pump (as per Manpuri pwd SOR) |
| 64 | M.S Clamp 4 inch dia made with 32.5 mm flate iron with nut & bolt (as per Manpuri pwd SOR) |
| 65 | 100 dia & PVC. Endcap (as per Manpuri pwd SOR) |
| 66 | Solution for jointing P.V.C. Pipe 250 Gram (as per Manpuri pwd SOR) |
| 67 | 32 mm dia P.V.C. pipe (DSR 18.9.4) |
| 68 | Nylone Cloth for strainer including plastic tope, cutting hole in P.V.C Pipe etc. complete in all.(as per Manpuri pwd SOR) Please Enable Macros to View BoQ information |