Name of Work:- SPECIAL REPAIRS TO ROAD FROM RP GATE TO INFANTRY CHOWK AND VIEW POINT TO CRIAPPA DWAR AT GRC K TEE. | Sl. No. | Item Description | |
| 1 | M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with mechanical equipment, to remove all loose dirt etc complete all as specified and as directed. | | 2 | M & L for Applying evenly a priming/tack coat with bituminous primer of paving bitumen at 5 kg per 10 square metre with bitumen grade VG-10 on blacktop surface using mechanical sprayer complete all as specified and as directed. | | 3 | M&L for premix asphaltic semi-dense concrete 30mm consolidated thickness with 5.5% binder content (paving bitumen any penetration of grade VG-30) by weight of total mix, rolled and compacted to required camber and gradient using 8 to 10 tonne power roller complete all as specified ans directed. | | 4 | M&L for premixed bituminous macadam (consolidated thickness 75mm or less) using with 4% binder content (paving bitumen any penetration of Grade VG-30) by weight of total mix, mixed in hot mixed plant and laid by using mechanical paver and rolled and compacted to required gradient and camber using 8 to 12 tonne power roller complete all as specified and as directed. | | 5 | Material and labour for Preparation of road surface and applying thermoplastic reflective paint in marking of minimum 2.5mm thick single coat as in centre line and edge line road marking of 150/100 mm width using 'HOT MARK' thermoplastic modern propelled road marking machine as directed including all ingredients such as blinder, glass beads Titanium dioxide calcium carbonate inter fillers thermoplastic requirement for glass beads shall be the Table No 800.4 of MORTH specification including spraying of glass beads etc all as per manufacture instructions and as specified and directed. | | 6 | S&F in repair solar road delineator 6 LEDs of colour red/ yellow housed in plastic body, LEDs, solar-cells, battery and light sensor well protected inside, polycarbonate sheet; device protected with powder coated wire mesh, cage. System mounted over 47 mm dia steel tube powder coated of length 600 mm having sheet foot for firm grip to ground. Delineator to have additional reflective bands. System workable for 2-3 days (nights) after full charge for 8-10 hours. Note: Delineators with extra height can also be made e.g. of height 750, 900 OR 1000mm. | | 7 | S&F in repair solar road stud having 3 LEDs of colours unbreakable Poly carbonate shell & clear facings designed for maintenance free operation, 100% water proof design confirms to IP67, Dimension: 125 X 125 x 25mm with Dual Shank of 65 mm. High Efficiency mono-crystalline Solar panel 3 V / 120 mA., One Ni-Mh LSD rechargeable battery (1.2V/800 mA) high temperature, Six Super bright LEDs with 14,000 mcd, View distance: Up to 1000m, Flash rate: 2Hz or according to customers requirements, Bearable weight: 20 Tons, Color: Red, Amber, Blue, Green and White, Working time: 36 to 40 hours successively after the battery is fully charged, The electronic circuit is encapsulated with the battery in the body of the Solar Stud, A non-invasive switch (optional) to avoid battery drainage during storage and transportation, Charging time: five to six hours/day, Working temperature: - 40° ~ 75°C, Lifetime: Three to five years, Easy installation, no maintenance, Brightness sensitive auto-switch automatically turns on at night and turns off at dawn, High visibility LED's help ensure easy and safe night driving, Ideal for highways, parking lots, roads and similar isolated or stand-alone traffic applications complete as per MORTH/IRC specifications and manufacture's instruction, complete all as specified and directed. | | 8 | S&F in repair aluminium road studs of two way reflective, dimensions 110 x 128 x 30 mm, aluminium Alloy body, Reflective Panel- Amber, Red or White Weight : 530 complete aluminium coated of approved quality, complete all as specified and directed. | | 9 | Demolition of cement concrete in ground floor & pavings n.exc 15cm thk (below or above ground level) complete all as specified and directed. | | 10 | M & L for Hardcore of gauge n exc. 63 mm Broken stone or boulders deposited, spread and levelled in layers n exc. 10 cm thick, watered and rammed to a true surface all as specified and directed . | | 11 | M & L for PCC (1:4:8) Type D2 (using 40 mm graded stone aggregates ) as in foundation of man holes etc . | | 12 | M & L for Crushed Sand filling under floorings/pavement spread and levelled in layers n.exc 15cm thick complete including watering and consolidation complete all as specified and as directed. | | 13 | M & L of Machine pressed precast concrete interlocking paver block colour glossy finished rubber pressed any shape and size confirming to IS 15658-2006 of 80 mm thickness M-35 Grade with Grey cement and pigment complete all as specified and as directed. | | 14 | M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in cills, steps, seismic and other similar bands, plinth courses, lacing courses parapets and railing upto 60cm height, copings, kneelers, bed plates, hold fasts block, filling on pressed steel door/ frame etc complete all as specified and as directed. | | 15 | Providing, cement concrete in roof kerbs Type B-1 1:2:4 Using 20 mm graded stone gregates in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed by Engr in Charge. | | 16 | NOTE : SCHEDULE OF CREDIT (Amount on page No 26 shall be deducted offline from the total quoted amount to arrive at the net contract sum to be considered for acceptance. Please Enable Macros to View BoQ information |
|