Indian Tenders

Tender Notice
TDR 55321771
Tendering Authority Public Works Department
Tender No PWD/BLDG/TR/4439/2026_5_1_1/1
Tender ID 2026_PWD_849175_1
Tender Brief Tender For General-Sainik School Kazhakoottam - Resurfacing The Internal Road From Entrance Gate 2 Towards Substation And Towards Junction Near Ground.-Mace-General Civil Work
City Thiruvananthapuram
State Kerala
Document Fees INR 3527 /-
EMD INR 50000.0 /-
Tender Value INR 20.86 Lakhs /-
Tender Type Tender
Bidding Type Open Tender
Competition Type Indian

Tender Details

Tender for General-Sainik School Kazhakoottam - Resurfacing The Internal Road From Entrance Gate 2 Towards Substation And Towards Junction Near Ground.-Mace-General Civil Work

Key Dates
Publish Date 02-05-2026
Last Date of Bid Submission 08-05-2026
Tender Opening Date 11-05-2026

Contact Information
Company Name Public Works Department
Contact Person Executive Engineer
Address Special Buildings Division Public Office Compound

BOQ Items
Name of Work:- GENERAL-Sainik School Kazhakoottam - Resurfacing the internal road from Entrance Gate 2 towards Substation and towards Junction near ground.-Mace-General Civil Work
Sl. No. Item Description
1Resurfacing of old road
2OD346634/2025-2026:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement.
3OD346633/2025-2026:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface.
416.31.2.2:Providing and applying tack coat using bitumen emulsion conforming to IS : 8887, using emulsion pressure distributor including preparing the surface & cleaning with mechanical broom.With medium setting bitumen emulsion On bituminous surface @ 0.25kg/sqm
5OD346632/2025-2026:Providing, laying and rolling of close-graded premix surfacing material of 40 mm thickness composed of 11.2 mm to 0.09 mm (Type-A) aggregates using viscosity grade bitumen (VG-30) to the required line, grade, and level to serve as wearing course on a previously prepared base, including mixing in a suitable HMP of appropriate capacity not less than 75 tonnes/hour, laying and rolling with a Smooth wheeled roller 8-10 tonne capacity, and finishing to the required level and grade
616.50:Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite) or HIP (High impact polystyrene) or ABS having electronically welded micro- prismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D 4280. The slope of retro-reflective surface shall be 35 (+/-5) degrees to base. The reflective panels on both sides with at least 12cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I : 809 as recommended in BS : 873 part 4 : 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-Charge.
716.62:Providing and applying 2.5 mm thick road marking strips ( retro - reflective ) of specified shade / colour using hot thermoplastic material by fully / semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T & P, cleaning the road surface of all dirt, seals, oil grease and foreign material etc. complete as per direction of Engineer - incharge and accordance with applicable specifications .
816.69:Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature jointed with cement mortar 1:3 ( 1 cement : 3 coarse sand) , including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge ( length of finished kerb edging shall be measured for payment ). ( Precast C.C. kerb stone shall be approved by Engineer-in-Charge)
913.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work Please Enable Macros to View BoQ information

Other Detail
Information Source https://etenders.kerala.gov.in
Download FileName File Description File Size
Download AFFIDAVIT.pdf Tender Documents 0 KB
Download BOQ_1434948.xls Tender Documents 0 KB
Download d299d399-fdd8-46e2-9dec-adf2a8a6ac46.html Tender Documents 0 KB
Download EPAYMENTFORM1.pdf Tender Documents 0 KB
Download FORM.pdf Tender Documents 0 KB
Download IntegrityPactCertificate-converted.pdf Tender Documents 0 KB
Download Tendernotice_1 (6).pdf Tender Documents 0 KB
Download viewsbd.pdf Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.