Name of Work:- जनपद मेरठ में पावलीखस द्वारिकापुरी सम्पर्क मार्ग के कि0मी0 1 में क्षतिग्रस्त ह्यूम पाईप कल्वर्ट के स्थान पर 3x3x3 स्पान का लधु सेतु का निर्माण का कार्य | Sl. No. | Item Description | |
| 1 | Dismantling reinforced cement concrete or reinforced brick work including stacking of materials as directed by the Engineer-in-charge within a distance of 60 metre (200 feet).As per SOR 12.04, 694 including all material, labour, taxes but excluding GST. | | 2 | Removal of unserviceable soil including excavation,loading and disposal up to 1000 meters lead but excluding replacement by sutiable soil which ahall be paid separately as per clause 305 including all material, labour, taxes but excluding GST. | | 3 | Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material including all material, labour, taxes but excluding GST. | | 4 | Providing concrete for plain/reinforced concrete M-10 in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 including all material, labour, taxes but excluding GST. | | 5 | Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation,Sub-Structure & Super-Structure complete as per Drawing and Technical Specifications including all material, labour, taxes but excluding GST. | | 6 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 (M-25) including all material, labour, taxes but excluding GST. | | 7 | Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 For height upto 5 m (M-25) including all material, labour, taxes but excluding GST. | | 8 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 (M-20) including all material, labour, taxes but excluding GST. | | 9 | Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification including all material, labour, taxes but excluding GST. | | 10 | Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 110 mm dia PVC pipe & 6kg/sqcm (ISI Marked), extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications. As per SOR 30(A) including all material, labour, taxes but excluding GST. | | 11 | Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 sqm including all material, labour, taxes but excluding GST. | | 12 | Cement Bag filled with Sand @ 0.035 cum as per SOR, Chapter-04, SI.No. 3 including all material, labour, taxes but excluding GST. | | 13 | Providing and laying Reinforced cement concrete pipe 1000mm dia NP3/prestressed concrete pipe including all material, labour, taxes but excluding GST. | | 14 | Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & (distance-2 km) leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 including all material, labour, taxes but excluding GST. | | 15 | Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface., mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, as per MORD specification 401 including all material, labour, taxes but excluding GST. | | 16 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density (.For Grading-II ) including all material, labour, taxes but excluding GST. | | 17 | Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density (For Grading-III) including all material, labour, taxes but excluding GST. | | 18 | Providing and applying tack coat with bitumen VG-10 grade using bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared granular surface treated with primer & cleaned with hydraulic broom as per Technical Specification Clause 503 including all material, labour, taxes but excluding GST. | | 19 | Providing and laying and rolling of open graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm agregates using V.G.-10 grade bitumen bitumen to required line grade and level to serve as wearing course on previously prepared base by manual MORD specific ations 508 including all material, labour, taxes but excluding GST. | | 20 | Providing and laying seal coat by manual means with VG-10 grade bitumen sealing the voids in bitumens surface laid to the specified levels grade and cross fall using type C as per Technical Specification Clause 510 including all material, labour, taxes but excluding GST. Please Enable Macros to View BoQ information |
|