|
| 1 | Constn. Of subgrade and earthen shoulders with approved materials obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000m. As per Technical specification clause 303.1 |
| 2 | Construction of granular sub-base by providing well graded ,spreading in uniform layers with motor grader on preapared surface, mixing by mix in place method with rotavater at OMC ,and compacting with smooth wheel roller to achieve the desired dencity, complete as per technical specification clause 401. of MORD data book |
| 3 | Providing, laying, spreading and compacting stone aggregate of specific size 45-63mm. to water bound macadum specification including spreading in uniform thickness hand packing Rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber applying and brooming stone screening to fill up the interstices of coarse aggregate watering and compating to the required density Grading 2 as per Technical Specification Clause 405 of MORD data book. compacted thickness 7.50 cm. |
| 4 | Providing laying and spreading and compacting stone ballast of specific Sizes to Water bound mecadam speci. Inc. spreading in uniform thickness, hand packing, rolling with theree wheel 8-10 ton static roller in stages 2 proper grade and camber, applying and brooming stone screening / binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical spec. clause 405.3 compacted thickness 75 mm |
| 5 | Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.85 kg/ sqm using mechanical means as per clause 502(ii) of MORD data book. |
| 6 | Providing and applying tack coat with Emulsion (R.S.-1) using pressure distributor at the rate of 0.275kg per sqm on the prepared bituminous surface cleaned with machanical broom as per 503(ii) of MORD data book |
| 7 | Providing and applying and rolling of open graded premix carpet of 20 mm thickness composed of 13.2mm to 5.6mm aggregates either using penitation grade bitumen or emulsion to require line grade and level to serve as vearing coarse on a previously prepared base including mixing in a suitable plant laying and rolling with a three wheel 80-100 kn static roller capacity finished to required level and grates to be followde by seal coat or either as per Technical Specification Clause 508 |
| 8 | Providing and laying seal coat sealing the voids in a bitumenus surface laid to the specified levels grade and cross fall using type-C as per Technical Specification Clause 510 |
| 9 | Brick Edging with Is Class 150 Bricks Laid mortar with both side of the road 7.5 cm wide including P& T SI No-765 |
| 10 | Constn. Of 600mm. Dia H.P. culvert. Excavation in foundation in ordinary soil including lift up to 1.5m and lead up to 30m. and including filling watering and ramming of excavated earth into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth ad directed by the Engineer in charge up to a distance of 30m. from the foundation trenches MORD SPEC NO 300 |
| 11 | Providing concrete for plain/Reinforced concrete in open foundation complete as per drawing and technical specification clauses 802,803,1202 &1203 Chap 11(11.4-800 &1200 iii) PCC M-10 |
| 12 | Supply of 600mm. Dia pipe. |
| 13 | Brick masonary work in1:4 cement mortar in sub structure complete execluding pointing and plastering as per drawing and technical specification clause 600,1202 & 1203 |
| 14 | Struck cement pointing in 1:3 cement sand mortar including supply of all materials labour tools and plants etc. required for proper completion of the work. |
| 15 | COSTRUCTION OF PULIYA Excavation in foundation in ordinary soil including lift up to 1.5m and lead up to 30m. and including filling watering and ramming of excavated earth into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth ad directed by the Engineer in charge up to a distance of 30m. from the foundation trenches MORD SPEC NO 300 |
| 16 | Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 kms from the site of work and including watering, dressing etc rate to include cost of all materials labour T & P etc required for proper completion of work |
| 17 | Providing concrete for plain/Reinforced concrete in open foundation complete as per drawing and technical specification clauses 802,803,1202 &1203 Chap 11(11.4-800 &1200 iii) PCC M-10 |
| 18 | Providing and laying reinforced cement concrete in superstructure as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5 |
| 19 | Brick masonary work in1:3 cement mortar in sub structure complete execluding pointing and plastering as per drawing and technical specification clause 600,1202 & 1203 |
| 20 | Brick masonary work in1:4 cement mortar in sub structure complete execluding pointing and plastering as per drawing and technical specification clause 600,1202 & 1203 |
| 21 | Providing and filling of weep hole with 75mm da P.V.C pipe required for all materials labour complete work. |
| 22 | Providing and laying reinforced cement concrete in superstructure as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5 |
| 23 | Providing and laying reinforced cement concrete in superstructure as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5 |
| 24 | Supplying, fitting, and placing MS bar reinforcement in superstructure complete as per drawing and technical specifications Clauses 1002, 1010 and 1202, for Bars below 36 mm dia including over laps and wastage, where they are not welded.(M-125) |
| 25 | Plain/Reinforcement cement concrete in open foundation compelete as per drawings and technical specification. |
| 26 | Struck cement pointing in 1:3 cement sand mortar including supply of all materials labour tools and plants etc. required for proper completion of the work. |
| 27 | Providing and laying filter material underneath pitching in slope complete in as per drawings technical specification. |
| 28 | providing and laying boulders apron on river bed for protection against scour with stone boulders weinging not less than 25kg each complete as per drawing and technical specification |
| 29 | providing and pumping set with insulation for dewatering of seapage in foundatio with all materials labour tools and plants etc |
| 30 | S/F of sign board and photography. Please Enable Macros to View BoQ information |