|
| 1 | Taking up or down GI water tubing and connections of 20 mm bore, including cleaning for re-fixing or removal from site for the following sizes (bore of pipe), complete all as specified and as directed by the Engineer-in- Charge.Note :- Earth work shall be measured and paid under respective item of BOQ. |
| 2 | Description all as per serial item No 01 here-in-before, but 50 mm bore, complete all as specified and as directed by the Engineer-in- Charge. |
| 3 | Description all as per serial item No 1 here-in-before, but 80 mm bore, complete all as specified and as directed by the Engineer-in- Charge. |
| 4 | Description all as per serial item No 1 here-in-before, but 100 mm bore, complete all as specified and as directed by the Engineer-in- Charge. |
| 5 | Supply and fixing/laying Steel water tubing of nominal bore 20 mm, medium grade galvanised ISI marked as per IS:1239 Part-I with all fittings including short lengths, fixed to walls/roof, concealed in wall and ceiling or laid in trenches/floors complete with all fittings ( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and as directed by the Engineer-in- Charge. |
| 6 | Description all as per serial item No 5 here-in-before, but 50mm bore, complete all as specified and as directed by the Engineer-in- Charge. |
| 7 | Description all as per serial item No 2 here-in-before, but 80mm bore, complete all as specified and as directed by the Engineer-in- Charge. |
| 8 | Description all as per serial item No 5 here-in-before, but 100 mm bore, complete all as specified and as directed by the Engineer-in- Charge. |
| 9 | S&F Gun metal globe or gate valve with iron wheel head screwed both ends (ISI marked) for iron pipes and fixed of size 20mm bore dia, including taking down old unserviceable, complete all as specified and as directed by the Engineer-in-Charge. |
| 10 | S&F Gun metal globe or gate valve with iron wheel head screwed both ends (ISI marked) for iron pipes and fixed of size 50mm bore dia, including taking down old unserviceable, complete all as specified and as directed by the Engineer-in-Charge. |
| 11 | M&L for Plain cement concrete 1:4:8, type D-2, using 40mm graded crushed stone aggregate, as in foundation filling and mass concrete, road cuttings etc., complete all as specified and asdirected by the Engineer-in-Charge. |
| 12 | Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for foundation etc., or for shafts, wells, cesspits, manholes, laying pipes CI/GI etc., not exceeding 10 Sqm on plan and n. exc. 1.5 metre in depth and getting out, in soft/loose soil, complete all as specified and as directed by the Engineer-in-Charge. |
| 13 | Returning, filling in, including spreading , leveling, watering and well ramming in layers not exceeding 25cm thick in any type of soil, complete all as specified and as directed by the Engineer-in-Charge. |
| 14 | Removing surplus excavated material (soil) to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point, complete all as specified and as directed by the Engineer-in-Charge. |
| 15 | Cleaning and removing all scale and dirt, etc, from the PVC tanks of capacity 1000 litres and from mouths of circulating pipes, etc., complete all as specified and as directed at site by the Engineer-in-Charge. |
| 16 | Cleaning and removing all scale and dirt, etc, from the PVC tanks of capacity 2000 litres and from mouths of circulating pipes, etc., complete all as specified and as directed at site by the Engineer-in-Charge. |
| 17 | M&L for Cutting existing steel tubing 40mm or 50mm bore for alterations or additions, complete all as specified and as directed by the Engineer-in-Charge. |
| 18 | Taking out damaged broken lagging from pipes and providing lagging to pipes of 20/15 mm bore, used in internal water supply or plumbing all round with, 25mm thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg /cum conforming to IS 9842 provided with chicken mesh wire netting 25 gauge, 20mm mesh, covering with POP layer, complete all as specified and directed at site by the Engineer -in-Charge . |
| 19 | Taking out damaged broken lagging from pipes and providing lagging to pipes of 25 mm bore, used in internal water supply or plumbing all round with, 25mm thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg /cum conforming to IS 9842 provided with chicken mesh wire netting 25 gauge, 20mm mesh, covering with POP layer, complete all as specified and directed at site by the Engineer -in-Charge. |
| 20 | M&L for Cleaning of Overhead reservior at the staging of 21m by draining out of water below supply level, removing all internal sludge by washing, cleaning the surface of the reservoir using wire brushes and other scraping tools to remove dirt and scales to make it free from deposits, washing the reservoir with pressure compressor nozzle thoroughly and removing dirty water from the tank to make it clean, repair to internal surfaces by plastering and providing fillers cracks to prevent any seepage of water and white washing to complete internal wall and floor of chamber, disinfecting the sump surface using disinfectent complete all as sepcified and directed for 50000 Gallons capacity, complete all as specified and as directed by the Engineer-in-Charge. Note :-The work of cleaning and disinfection will be carried out by experts person in the field of work. The work is to be carrried out in such a way that the water supply is not disrupted. |
| 21 | Description all as per Serial item No 20 here-in-before, but under ground sump of capacity 20000 Gallons, complete all as specified and as directed by the Engineer-in-Charge. Note: The work of cleaning and disinfection will be carried out by experts person in the field of work. The work is to be carrried out in such a way that the water supply is not disrupted. |
| 22 | Description all as per Serial item No 20 here-in-before, but under ground sump of capacity 5000 Gallons, complete all as specified and as directed by the Engineer-in-Charge. Note: The work of cleaning and disinfection will be carried out by experts person in the field of work. The work is to be carrried out in such a way that the water supply is not disrupted. |
| 23 | Writing letters or figures in Block Roman, Italian or Indian with synthetic enamel paint of shade as directed, height not exceeding 36 cm complete, all as sepcified and directed including all required material of T&P. Note :- Only letters and figures shall be considered for payments. Commas, dashes, full stop etc shall not be considered for payment. |
| 24 | Supply and fixing in replacement of CI Sluice valves PN 1.6 flanged and of sizes for 80mm bore complete with iron wheel head and spindle including material and labour for flanged joints and replacement of nuts and washers etc., complete all as specified and as directed by the Engineer-in-Charge. |
| 25 | Supply and fixing in replacement of CI Sluice valves PN 1.6 flanged and of sizes for 100mm bore complete with iron wheel head and spindle including material and labour for flanged joints and replacement of nuts and washers etc., complete all as specified and as directed by the Engineer-in-Charge. |
| 26 | Supply and fixing in replacement of CI Sluice valves PN 1.6 flanged and of sizes for 150mm bore complete with iron wheel head and spindle including material and labour for flanged joints and replacement of nuts and washers etc., complete all as specified and as directed by the Engineer-in-Charge. |
| 27 | Supply and fixing in replacement of CI Foot valves of sizes for 100mm bore, complete all as specified and as directed by the Engineer-in-Charge. |
| 28 | Run lead joints for spigot and socket pipes of and pipe fittings of size 80mm bore joint including spun yarn, complete all as specified and as directed by the Engineer-in-Charge. Note :- These joints are meant for laying new or old pipe and fittings and where independent leaking joints to be ordered. In case of leakage to be rectified. Necessary excavation and earth work measured and paid for seperately). |
| 29 | Description all as per Serial item No 27 here-in-before, but 100 mm bore, complete all as specified and as directed by the Engineer-in-Charge. |
| 30 | Description all as per Serial item No 27 here-in-before, but 150 mm bore, complete all as specified and as directed by the Engineer-in-Charge. |
| 31 | Supply and fixing in replacement of CI NRV flanged ends heavy duty (PN 1.6) suitable for 100mm bore pipe including 6mm thick rubber insertion ring including taking out 100mm dia pipe from sump and making its two pieces and welding 100mm flanges for fixing of NRV at bottom of sump, complete all as specified and as directed by the Engineer-in-Charge. |
| 32 | Collecting water sample from pump house/ RO plant and submitted water sample for testing at water testing lab Zainakote, Srinagar and after complete testing submit testing report to AGE (I) CIF (K), complete all as directed by the Engineer-in-Charge. |
| 33 | Note :- An amount of Rs. Rs 15,005.00 on account of credit schdule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum. Please Enable Macros to View BoQ information |