|
| 1 | Upgradation of Boundary wall & Common Room for Boys and Girls Student at Dr. Ambedkar Govt. P.G. College Raibareli District- Raebareli (U.P.) |
| 2 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of uitserviccable material within 50 metres lead as per direction of Engineer - in- charge |
| 3 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar |
| 4 | Disposal of building rubbish / malba / similar unserviceable; dismantled or waste materials by mechanical means, including loading. transporting. unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead. for all leads including all lifts involved |
| 5 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50m and lift up to 1.5m,as directed by Engineer-in-Charge. All kinds of soil |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). |
| 7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15\\" landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttening, finishing and reinforcement with 1:1.5:3 (1 cernent: 1.5 coarse sand(zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources). (Lintel/Beam) |
| 8 | Up to Plinth level |
| 9 | Above Plinth level |
| 10 | Providing and laying in position specified grade of reinforced cement concrete. excluding the cost of centering. shuttering, finishing and reinforcement - All work up to plinth level 1:1.5.3 (1 coment : 1 5 coarse sand (zone.lll) denved from natural sources 3 graded stone aggregate 20 mm nominal size de rived from natural sources) (Columns) |
| 11 | Up to Plinth level |
| 12 | Above Plinth level |
| 13 | Providing and laying in position specified grade of reinforced cement concrete. excluding the cost of centering. shuttering, finishing and reinforcement - All work up to plinth level 1:1.5.3 (1 coment : 1 5 coarse sand (zone.lll) denved from natural sources 3 graded stone aggregate 20 mm nominal size de rived from natural sources) (Raft Foundation & Footing) |
| 14 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding ali complete upto plinth level or above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 15 | Brick work with common bumt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 16 | Brick work in super-structure above plinth level including necessary cutting and moulding of brick work as required and also including honeycombod binck work in thickness of wall more than 12cms. (1:6 coment : coarse sand). |
| 17 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7 5 in superstructure above plinth level up to floor V level.Cement mortar| 6.12,2+5.14 1:4 (1 comont :4 coarse sand) |
| 18 | Extra for providing and placing in position 2 Nos Brrm dia. M.S, bars at every third course of half brick masonry. |
| 19 | 15 mm cement plaster in single coat on rough side of single or hait brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm: in girth and finshed even and smooth. (1) 1 cement : 6 coarse sand, |
| 20 | Finishing walls with water proofing cement paint of required shade : New work (Two or more coats oppbed @ 3.84 kg/10 sqm) |
| 21 | Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1,7kg per square metre on damp proof course after cleaning the: surface with brushes and finally with apiece of cloth lightly soaked In kerosene oil. |
| 22 | Providing and fixing M.S. grills of required pattem in frames of windows etc. with M.S. Flats, square or round bars etc. all complete. Fixed lo Steel windows by welding |
| 23 | Steel Painting: |
| 24 | (a) With ready mixed red oxide zink chromate primer of approved brand and manufacture on steel galvanised iron/stoel works. |
| 25 | (b) Painting with synthetic enamel paint of approved brand and manufacture to give an event shade: Two or more coals on new work |
| 26 | Centering and shuttering including strutting, propping etc, and removal of form for : |
| 27 | Lintels, bearna, plinth beams, girders, bressumers and cantilevers with water proof ply: 12 mm thick |
| 28 | Foundations, footings, bases of columns, etc for mass concrete, |
| 29 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 30 | GST Extra as applicable Please Enable Macros to View BoQ information |