|
| 1 | PVC INSULATED SINGLE CORE FR COPPER CONDUCTOR CABLE: |
| 2 | Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- |
| 3 | Overall size 1 sq.mm (Un-sheathed) |
| 4 | Overall size 1.5sq.mm (Un-sheathed) |
| 5 | Overall size 2.5sq.mm (Un-sheathed) |
| 6 | Overall size 4sq.mm (Un-sheathed) |
| 7 | Overall size 6sq.mm (Un-sheathed) |
| 8 | Overall size 10 sq.mm (Un-sheathed) |
| 9 | PVC, HDPE PIPES & PVC FLEXIBLE PIPES: |
| 10 | Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- |
| 11 | Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed) |
| 12 | Heavy Gauge PVC Conduit Pipe 25mm dia. (On Surface) |
| 13 | SUPPLY AND ERECTION OF WIRING ACCESSORIES: |
| 14 | Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.:- |
| 15 | 6/10amp. One Way Modular Switch (One Module) |
| 16 | 16/20amp. One Way Modular Switch with Indicator (One Module) |
| 17 | 6amp. 2/3 Universal Modular Shuttered Socket (two Module) |
| 18 | 16/20amp. Universal Modular Shuttered Socket (two Module) |
| 19 | Step type Modular Electronic Fan Regulator 100watts (Two Module) |
| 20 | Modular Telephone Socket (RJ-11) One Module |
| 21 | Modular RJ-45 Modem Jack for Computer (One Module) |
| 22 | Modular Motor Starter 25Amp. (Two Module) |
| 23 | Call Bell 220/230 volts AC Ding Dong |
| 24 | Modular Blanking Plate (One Module) |
| 25 | Supply and erection of Modular Cover Frame (Complete set) on the existing metal box including fixing and connection of existing switches and sockets and other petty material etc:- |
| 26 | Modular Cover Frame One or Two Module |
| 27 | Modular Cover Frame Three Module |
| 28 | Modular Cover Frame Four Module |
| 29 | Modular Cover Frame Six Module |
| 30 | Modular Cover Frame Eight Module |
| 31 | Modular Cover Frame Twelve Module |
| 32 | CAPACITORS & BALL BEARINGS: |
| 33 | Supply and erection of Capacitors of different capacity for ceiling fans, exhaust fan & street light fittings etc.:- |
| 34 | Capacitor 2.5µF |
| 35 | Supply and erection of Ball Bearing of different sizes for ceiling fans and exhaust fan etc.:- |
| 36 | Ball Bearing 6201 |
| 37 | MINIATURE CIRCUIT BREAKERS: |
| 38 | Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- |
| 39 | MCB Single Pole 6-32amp. (10kA, Curve-C) |
| 40 | MCB Double Pole 40amp. (10kA, Curve-C) |
| 41 | MCB Four Pole 40 amp. (10kA, Curve-C) |
| 42 | MCB Four Pole 50, 63amp. (10kA, Curve-C) |
| 43 | REPAIR AND REWINDING OF CEILING/ EXHAUST FANS: |
| 44 | Providing Full stator rewinding of a Ceiling fan/ Exhaust fan (Capacitor type) with super enamelled copper wire including cleaning & insulating the stator slots, sleeving, soldering, wrapping of cotton tape, varnishing, re-assembling & testing etc., complete:- |
| 45 | Rewinding of Ceiling Fan 1200mm Sweep |
| 46 | Supply and erection of LED batten 20 Watt LED (including constant LED driver) with High quality extruded aluminium with efficacy of LED fixture minimunm 100 lumens per watt and operating voltage between 140 to 270 volt, THD <10% ingress protection IP20 (as per latest BIS standards) surge protection - 2.5 KV and above (as per IS/IEC standards) wattage of each low power LED less than 1 watt input AC frequency 50 Hz ± 3 % with 5 year warranty including there drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No: AT/2021/GL/1410-1422, Dated: 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited laboratory. |
| 47 | Supply and erection of LED batten 40 Watt LED (including constant LED driver) with High quality extruded aluminium with efficacy of LED fixture minimunm 100 lumens per watt and operating voltage between 140 to 270 volt, THD <10% ingress protection IP20 (as per latest BIS standards) surge protection - 2.5 KV and above (as per IS/IEC standards) wattage of each low power LED less than 1 watt input AC frequency 50 Hz ± 3 % with 5 year warranty including there drivers complete along with erection of the same with connections, testing etc. complete in all respects as approved and desired by the Engineer-in-charge at site. LED Fitting as per Specifications approved by Hon. Tech. Advisor to CM Punjab vide Letter ION No: AT/2021/GL/1410-1422, Dated: 06.05.2021. Besides this the lighting fixtures manufactures should have in house NABL accredited laboratory. |
| 48 | Supply and erection of Recessed mounted 36watt LED 2x2 panel, Supply Voltage 140-270Volts AC supply, 50Hz ± 3% (including BIS Certified potted single diver with screen or laser printing logo LED driver) with CRCA sheet with control gear (IP 20 protection), THD<10%, CRI minimum 70, Low power LED with wattage Less 1 Watt, Surge Protection 2.5KV and above as per IS/ IEC Standards, efficacy of LED fixture minimum 100 lumens per watt, 5 year warranty including their drivers complete in all respects as approved and desired by the Engineer in-charge at site. LED Fittings as per specifications approved by Hon'ble Technical Advisor to Punjab Govt. vide Letter ION No:- AT/2021/GL/1410-1422 Dated:- 06.05.2021. Besides this the lighting fixtures manufacturers should have in house NABL accredited lab |
| 49 | Supply and erection of Ceiling Fans 1200 mm Sweep (48\\") 3 Star having two ball bearing including flexible wire & petty material etc.complete in all respects as appd. and desired by the Engineer in-charge at site. |
| 50 | Supply and erection of Heavy duty Exhaust Fan 300mm, 900RPM with aluminium louver shutter, double ball bearing longer life including flexible wire & petty material etc. for connections and testing complete in all respect as approved and desired by the Engineer in-charges at site. |
| 51 | Supply and erection of LED Street Light 45 watt (including LED driver) with pressure die cast aluminium housing with control gear ( IP 66 protection),THD< 10%, CRI minimum 70, High power LED with mandatory secondary lenses, toughened glass fitting, 4 KV SPD within driver and 10KV external SPD, efficacy of LED fixture minimum 120 lumens per watt, complete in all respects as approved and desired by the Engineer in-charge at site. LED Fittings as per specifications approved by Hon'ble Technical Advisor to CM Punjab vide letter No. AT-2021/GL 1410-1422 Dated 06/05/2021 Please Enable Macros to View BoQ information |