|
| 1 | SH-Bore Well |
| 2 | Ground water exploration (Drilling by DTH-200 Rig mechine with ODEX option bore-well size 5\\" (127 mm) and complete assembling with ERW casing pipe of size 128 mm ID and 142 OD and other required lubricants, accessories in the depth of approximately 100 mtr. |
| 3 | Provision for Jacket filter and other accessories |
| 4 | (a) Jacket filter 80 mm dia and 3.00 mtr length each |
| 5 | (b) Packer assembly |
| 6 | © GI reducer 80 x 50 mm |
| 7 | (d) GI Socket 80 mm |
| 8 | (e) GI Nipple 50 mm dia |
| 9 | (f) End plug |
| 10 | Supplying and fitting 2 Horse power 1 pnase submersible pump made in cromption greaves discharge up to total head of 150 m with compartible to 40-50 mmdiameter pipe. |
| 11 | Supply of panel board with high quality |
| 12 | Supply of submersible cable 4 sqm copper |
| 13 | Supply of sfety wire |
| 14 | Supply of starter |
| 15 | Supply of GI pipe 40 mm x 3 mtr length filter with socket |
| 16 | Provision for 5\\" bore-well size capacity clamp (2 Nos ) with nut & bolt |
| 17 | SH-Ringwell |
| 18 | Excavation in foundation trenches not exceeding 1.50 m width or 10 Sq.m.on plan or drains not exceeding 1.50 m in width or 10 Sq.m. on plan including dressing of sides and ramming of bottoms, lift upto 1.50 m including getting out the excavated soil as directed,within a lead of 50 m. |
| 19 | c) Hard Rock requiring chiselling (where blasting is probihited) |
| 20 | Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete. |
| 21 | Providing and laying cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering in : |
| 22 | b) Walls including attached buttresses, pilasters and their caps and bases and string courses etc. up to floor two level. |
| 23 | Centring and shuttering including strutting proping etc. and removal of form work for: |
| 24 | b) Walls including attached buttresses, pilasters etc |
| 25 | Name of Work:- C/o Cleaning of Desilting of drain near Doniso Colony, Chimpu, Itanagar. |
| 26 | Hill Side Drain Clearance (Removal of earth from the choked hill side drain and disposing it on the valley side manually) |
| 27 | Name of work :- C/o Approach Road at Doniso colony, Itanagar. (SH-Formation Cutting). |
| 28 | Excavation in Soil with Dozer with lead upto 100 metres ( Excavation for road way in soil by mechanical means including cutting and pushing the earth to site of embankment upto a distance of 100 metres (average lead 50 metres), including trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections.) Please Enable Macros to View BoQ information |