|
| 1 | Mtc Work |
| 2 | Reapering of centrifugal pumps by providing & placing of impeller ( conforming to IS:1520 ) as per specification & direction of the Engg-in-Charge. |
| 3 | (i) For 45000/50000GPH Capacity |
| 4 | (ii)For 62500 GPH Capacity |
| 5 | (iii)For 100000GPH Capacity |
| 6 | Reapering of centrifugal pumps by providing & placing of Bush(sleeve ) ( conforming to IS:1520 ) as per specification & direction of the Engg-in-Charge. B) C.I Bush(sleeve) |
| 7 | (i) For 45000/50000GPH Capacity |
| 8 | (ii)For 62500 GPH Capacity |
| 9 | (iii)For 100000 GPH Capacity |
| 10 | Reapering of centrifugal pumps by providing & replacing of joining paper ( conforming to IS:1520 ) as per specification & direction of the Engg-in-Charge. |
| 11 | (i) For 45000/50000GPH Capacity |
| 12 | (ii)For 62500 GPH Capacity |
| 13 | (iii)For 100000 GPH Capacity |
| 14 | Repairing of centrifugal pumps by providing & replacing of SS shaft ( SS-410) as per specificaton & direction of the Engg-in-Charge. |
| 15 | (i) For 45000/50000GPH Capacity |
| 16 | (ii)For 62500 GPH Capacity |
| 17 | (iii)For 100000 GPH Capacity |
| 18 | Repairing of centrifugal pumps by providing & replacing of Ball bearing (conforming to IS:1520) as per specificaton & direction of the Engg-in-Charge. |
| 19 | (i) For 45000/50000GPH Capacity |
| 20 | (ii)For 62500 GPH Capacity |
| 21 | (iii)For 100000 GPH Capacity |
| 22 | Repairing of centrifugal pumps by providing & replacing of Coupling (conforming to IS:1520) with necessary fitting fixing as per specificaton & direction of the Engg-in-Charge. |
| 23 | (i) For 45000/50000GPH Capacity |
| 24 | (ii)For 62500 GPH Capacity |
| 25 | (iii)For 100000 GPH Capacity |
| 26 | Providing and fitting, fixing PVC suction hose pipes of wall thikness 6 mm as per relevant IS Specification and direction of the Engg-in-Charge. (ii)150 mm dia |
| 27 | Providing and fitting, fixing od MS clamp for hose pipes with nuts and bolts complete as per relevant IS Specification and direction of the Engg-in-Charge. |
| 28 | Supplying of gear oil grade 320 for newly installed different gear box at plant in different component ( clearflocullator tank, flash mixture tank, alum mixture tank etc. ) as per direction of the Engg-in-Charge. |
| 29 | Labour charge for repairing 250/200/150 mm dia foot valve as per direction of the Engg-in-Charge. |
| 30 | Making, supplying of M.S Gland plate suitable for 1.00 lac GPH capacity centrifugal pump as per departmental sample. |
| 31 | Supplying and fitting, fixing of bearing case suitable for 1.00 lac GPH capacity centrifugal pump as per departmental sample. |
| 32 | Welding by gas or electtric plant in/c transportation plat at site etc. complete as per standard desgin. |
| 33 | Providing and fitting, fixing Foot valve as per relevant IS specificaion and direction of the Engg-in-Charge |
| 34 | i) 150 mm dia |
| 35 | i) 200 mm dia |
| 36 | Providing and fitting, fixing S.S Nut-Bolts coupling as per direction of the Engg-in-Charge. |
| 37 | Labour Chage for unloading of sand & different dia geravels fron filter bed at 1.00 MGD water Treatment plant at Sonamura & dewatering the stagnant of water & relaying same at filter bed in/c cleaning & washing the bed by the bleaching powder etc. complete as per directon of the Engg-n-Charge (Bleaching powder will be deptt. At free of cost). |
| 38 | Providing and fitting, fixing 15 MM nominal bore brass full way valve of approved quality as per direction of the Engg-in-Charge. |
| 39 | Making and supplying of MS spindle with MS socket for C.I sluice valve of different sizes as per departmental sample. |
| 40 | a) Size 8'' ( 200 mm ) dia |
| 41 | b) Size 6'' ( 150 mm ) dia |
| 42 | Making and supplying of MS spindle with MS socket for C.I sluice valve of 10'' (250 mm ) dia sizes as per departmental sample. |
| 43 | Labour charge for clening & washing sludge & other foreign materials from the underground reservoir tank in/c cleaning the wall etc. complete as per direction of the Engg-in-Charge. |
| 44 | Providing and supplying spare parts/components of size 5'' ( 125 mm ) dia pump delivery sluice valve as per departmental sample as per direction of the Engg-in-Charge. A) MS spindle with socket. |
| 45 | Dismantling of motor, gear box water pipe line & stirrer rod with fan etc. complete in all respect of T/P alum dosing/lime dosng/bleaching dosing arrangements. |
| 46 | Reparing of worm out 2 ( Two ) nos rail wheel by Mswelding for re-assembling, turning & finishing etc. complete as per direction of the Engg-in-charge. |
| 47 | Providing and fitting, fixing rubber bush of Love and joy coupling L-225 as per direction of the Engg-in-Charge. |
| 48 | Supplying and fitting fixing of 2 inch dia M.S gear wheel and 3 inch dia pinion for operation of main gear of reputed firms as per direction of the Engg-in-Charge. |
| 49 | Supplying and fitting fixing of C.I crown wheel set for clarifluculator rail pedals of reputed firms as per direction of the Engg-in-Charge. |
| 50 | Providing and fitting, fixing 10 mm size Asbestos rope as per direction of the Engg-in-Charge. Please Enable Macros to View BoQ information |