|
| 1 | Earthwork in excavation by manual means in trenches for foundation (Not exceeding 1.5m in width), depth upto 1.5m incl. disposal of excavated earth upto 1m from cutting edge. (All Kinds of Soil) |
| 2 | Providing & Laying of Dry stone soling hand packed and plum in concrete |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 4 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand) upto plinth lvl |
| 5 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 6 | P/F of mild steel door/window frame and shutter complete job incl. Prime coat and painting |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form work for: Suspended floors, roofs, landings, balconies and access platforms. |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form work for :Foundations, footings, bases of columns etc. for mass concrete. |
| 9 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 10 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level |
| 11 | 12 mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) |
| 12 | P/l of 40mm thick flooring with Cement Concrete 1:2:4 (20 mm N/S ) |
| 13 | Providing and fixing Ist quality ceramic glazed wall/ floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 14 | Dry random rubble masonry with hard stone in foundation & plinth using nallah stone i/c carriage |
| 15 | Finishing wall with premium acrylic smooth exterior paint with silicone ditives of required shade on New work (two or more coats applied @ 3.28 liter/10sqm over and including priming coat of water exterior paint applied @ 2.20kg/10sqm |
| 16 | Carraige of Sand/Bajri by MT 90 km from source to site of work i/c h l of 300 m . |
| 17 | Carraige of Stone/soling by MT 10 km from source to site of work . |
| 18 | Carraige of bricks by MT 130 km from source to site of work i/c h l of 300 m. |
| 19 | Providing and fixing white vitreous china pedestal type water closet (indian type W.C. pan) with seat and lid, 5 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked |
| 20 | Providing and fixing rectangular high density polyethylene water storage loft tank with cover, con colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings (Water storage tank) |
| 21 | PP-R PIPES AND FITTINGSProviding and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. Internal work-exposed on wall with clamps at 1.00 meter spacing PN-16 pipe , 20mm OD(SDR-7.4) |
| 22 | P/F 75 mm sewage pipes of class B of approved brand. |
| 23 | P/F 100 mm sewage pipes of class B of approved brand. |
| 24 | P/F P floor TRAP |
| 25 | P/F S trap |
| 26 | P/F cowel 75 mm |
| 27 | P/F D bend |
| 28 | BIB cock |
| 29 | P/F ball valves 15 mm nominal bore of approved quality |
| 30 | p/f of gate valve |
| 31 | P/F of information signboard and photographs Please Enable Macros to View BoQ information |
