|
| 1 | Earth work Excavation for pipe line in trenches and pits up to 1.5 meters depth in open area where disposal of surplus earth is done alongwith alignment, including trimming and dressing sides, levelling of beds of trenches to correct grade, cutting joint holes, refilling; consolidation and watering of refill in 15cm layers andRestoration of unmetalled or unpaved surface to its original condition excluding cost of shoring and timbering but including the cost of dewatering of rain water, diversion for traffic, night signals, providing & fixing caution boards, watching, fencing etc.Depth upto 1.5 mtr |
| 2 | Earth work Excavation for pipe line in trenches and pits up to 1.5 meters depth in open area where disposal of surplus earth is done alongwith alignment, including trimming and dressing sides, levelling of beds of trenches to correct grade, cutting joint holes, refilling; consolidation and watering of refill in 15cm layers andRestoration of unmetalled or unpaved surface to its original condition excluding cost of shoring and timbering but including the cost of dewatering of rain water, diversion for traffic, night signals, providing & fixing caution boards, watching, fencing etc.Depth upto 1.5 mtr to 2.25mtr |
| 3 | Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. |
| 4 | First class burnt brick laid in cement sand mortar 1:6 for bed and side wall [Item No 11.3(i)]. |
| 5 | 10mm thick cement plaster 1.4 on sides walls (-) Rs.1.25/- for scaffolding. |
| 6 | 10mm thick cement plaster 1:4 on bed and top. |
| 7 | Reinforced cement concrete 1:2:4 hand mixed but including steel reinforcement (CSRItem No 10.13 (a) (i) |
| 8 | Cement Conc.1:2:4 including supply, carriage & with stone ballast or shingle |
| 9 | Cement concrete 1:4:8 with brick ballast 40mm gauge |
| 10 | Laying, fixing and jointing of UPVC Pipes as per ISI 4985 (ISI marked with the prior approval of Engineer-inCharge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specification .200 mm dia pipe of 2.5 kgf./sqcm |
| 11 | Laying, fixing and jointing of UPVC Pipes as per ISI 4985 (ISI marked with the prior approval of Engineer-inCharge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specification .225 mm dia pipe of 2.5 kgf./sqcm |
| 12 | Providing and fixing of G.I pipe 50 mm for air vent valve complete in all respect to the specification of engineer in charge |
| 13 | Providing and fixing of Alfa Alfa Valve fitted on riser pipe to act as Nakka (D regulators) DIA-250 mm |
| 14 | Providing and fixing of Alfa Alfa Valve fitted on riser pipe to act as Nakka (D regulators) DIA-225 mm |
| 15 | Wrought Iron and mild steel ladders, framed grills, grating etc. complete fixed in position in D-tank.(CSR 2020 Item No.18.4) |
| 16 | Providing & fixing M.S. foot rests made of 23x25 mm square bar including fixing in Haudis complete with cement concrete 1:2:4 (CSR 2020 Item No.29.35 ) |
| 17 | Centreing & shuttering for Concerte faces |
| 18 | Providing and fixing of Steel Shutter Gates Assembly in Main Pipeline complete in all respects. |
| 19 | Dismantling of Brick work in Cement, CSR 2020 - item no- 8.5 (b) |
| 20 | Supplying, carriage and fixing UPVC Bend size 250 mm Ф, 1.5 mtr length of 90 degree |
| 21 | Supplying, carriage and fixing UPVC Bend size 250 mm Ф, 1.5 mtr length of 45 degree |
| 22 | Supplying, carriage and fixing UPVC Bend size 250 mm Ф, 1.5 mtr length of 30 degree |
| 23 | Supplying, carriage & fixing equal UPVC Tee of 4kg/cm2 pressure as per IS 4985 i/c testing commisioning and complete in all respect to the specification of engineer in charge (250mm) |
| 24 | Providing and fixing MS service Sadle of 4kg/cm2 pressure as per IS 4985 i/c testing commisioning and complete in all respect to the specification of engineer in charge (250mm *50 mm) |
| 25 | Providing and fixing Tail end piece 250 mm of 4 kg/cm2 pressure as per IS 4985 i/c testing commisioning complete in all respect to the satisfaction of engineer in charge |
| 26 | Supplying, carriage and fixing UPVC Bend size 225 mm Ф, 1.5 mtr length of 90 degree |
| 27 | Supplying, carriage and fixing UPVC Bend size 225 mm Ф, 1.5 mtr length of 45 degree |
| 28 | Supplying, carriage and fixing UPVC Bend size 225 mm Ф, 1.5 mtr length of 30 degree |
| 29 | Supplying, carriage & fixing equal UPVC Tee of 4kg/cm2 pressure as per IS 4985 i/c testing commisioning and complete in all respect to the specification of engineer in charge (225mm) |
| 30 | Providing and fixing MS service Sadle of 4kg/cm2 pressure as per IS 4985 i/c testing commisioning and complete in all respect to the specification of engineer in charge (225mm *50 mm) |
| 31 | Providing and fixing Tail end piece 225 mm of 4 kg/cm2 pressure as per IS 4985 i/c testing commisioning complete in all respect to the satisfaction of engineer in charge |
| 32 | Providing & fixing air valve complete |
| 33 | Miscellaneous item 1 |
| 34 | Miscellaneous item 2 |
| 35 | Miscellaneous item 3 Please Enable Macros to View BoQ information |