Indian Tenders

Tender Details

Bids Are invited for Earth work in excavation - Earth work in excavation in foundation trenches or drains not exceeding 1 50M in width or 10 00 SqM on plain including dressing of sites and ramming of bottoms lift upto 1 50M including getting out the excavated soil and disposal of surplus excavated soil including dewatering and directed with a lead of 500 M , Filling available excavated earth - Filling available excavated earth excluding rock in trenches plinth sides of foundation etc in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering lead upto 50M and lift upto 1 50 M , filling in plinth with sand - Supplying and filling in plinth with sand under floors including watering ramming consolidating and dressing complete of direction of the EIC. , Dismantling old plaster - Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50M lead , Demolishing cement concrete - Demolishing cement concrete including disposal of materials within 50M lead Concrete mix 1 /3 /6 Cement concrete or richer mix , Cleaning jungle - Cleaning jungle and grass including of rank vegetation grass wood bush trees and saplings of girth upto 30cm measured at a height of 2.60 M above ground level and removal of rubbish upto a distance of 500M outside the periphery of the area measured , Demolishing brick work - Demolishing brick work including Stacking of Serviceable materials and disposal of unserviceable materials within 50M lead , plain Cement concrete 1 isto 3 isto 6 - Providing and laying plain Cement concrete1/3/6 - 1 cement /3 coarse sand / 6 graded stone aggregate 40mm nominal size in foundation Plinth wherever necessary including desalinating finishing Curing etc as per specification all complete but excluding the cost of centering and shuttering etc , plain Cement concrete 1 isto 2 isto 4 - Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level 1 cement /2 coarse sand/ 4 graded stone aggregate 20mm nominal size , reinforced cement Concrete work 1 isto 1 5 isto 3 - Providing and laying reinforced cement Concrete work 1 cement /1.5 coarse sand / 3 graded stone aggregate 20mm down screened and washed including machine mixing placing in position and mechanically vibrating in columns pillars etc to any level and anywhere and like including preparing of the top surface finishing curing etc complete in all respects as per specification and direction of the Engineer-in-charge , Steel reinforcement - Steel reinforcement for reinforced cement concrete work including transporting decoiling straightening derusting placing cutting to requiste length hooking bending to correct shape placing in proper position and binding with 16 gauge black annealed wire at every intersection including removal of loos rust and applying a coat of cement wash if necessary complete in all respects as per drawing and as directed , brick work foundation and plinth - Providing and laying 1st class brick work with bricks of class designation 75 in foundation and plinth in cement mortar 1/6 -1 cement / 6 coarse sand including all complete as per specification drawing and direction of the EIC , brick work in Super structure - Providing and laying best quality brick work in Super structure upto floor two level 1/6- 1 cement / 6 coarse sand including curing scaffolding shuttering etc all complete. All materials including cement etc to be supplied by the contractor , Half brick masonry - Half brick masonry with common burnt clay F.P.S non modular bricks of class designation 7.5 in foundations and plinth in cement mortar 1/4 - 1 cement / 4 coarse sand , 12 mm thick cement plaster 1 isto 6 - Providing and laying 12 mm thick cement plaster 1/6 -1 cement /6 fine sand all complete as per specifications. All materials including cement etc to be supplied by the contractor , 15 mm thick cement plaster - Providing 15 mm thick cement plaster to a rough side in cement mortar 1/6 - 1 cement / 6 fine sand including scaffolding ,raking the joints backing the surface finishing to correct lines, levels plumb curing as required . , 12 mm thick cement plaster 1 isto 4 - Providing and laying 12 mm thick cement plaster 1/4 - 1 cement / 4 fine sand with a floating coat of neat cement punning with redoxided powder all complete as per specification. All materials including cement etc. to be supplied by the contractor. , 25mm thick cement concrete flooring - 25mm thick cement concrete flooring 1/2/4 - 1 cement / 2 coarse sand / 4 grauted stone aggregate finished with a floating coat of neat cement including cement slurry rounding of edges and strips etc. , The overhead tank - The overhead tank of capacity 1000 litres should be constructed with half brick wall of 1 is to 3 cement mortor on 10cm thick RCC 1 is to 2 is to 4 slab resting on two brick walls of 1 is to 4 cement mortor with 1 is to 4 cement mortor with 1 is to 4 cement plastering at 35cm height from the floor level The tanks should be neat finished with cement plaster outside and inside with water proofing materials 50mm thick precast RCC 1 is to 2 is to 4 is to slab including both side neat cement finish will be provided . An outlet GI pipe or bend with plug should be grouted at the time of floor slab casting The tank should be leak proof and the completed tanks shall be checked by the representative of Corporation before being taken over old M. S tanks should be removed and returned to Estate Section on his own arrangement . , asbestos cement sheet - Providing and Fixing asbestos cement sheet in roofing fixing with GI J OR L hooks bolts and nuts 8mm dia GI plain and bitumen washer complete . GI hook and washer AC sheet will be supplied by the Contractor - Everest Brand . , G I sheet in roofing - Providing and fixing G I sheet in roofing fixing with GI J or L hooks bolts and nuts 8mm dia GI plain and bitumin washer complete 0.80mm thick with zink coating not less than 275 gram or sqm all materials will be supplied by the contractor. , Structural steel work - Providing and laying Structural steel work riveted bolted or welded in built up sections trusses and framed work including cutting hoisting fixing in position and applying a priming coat of approved steel primer all complete. , 35mm thick ISI marked flush door - Providing and fixing 35mm thick ISI marked flush door shutters conforming to IS isto 2202 Part I non decorative type core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters - sizes including fixing the handles / hinges/ tower bolt/ aldrops etc. wherever necessary. All the serviceable fittings of dismantled door shutter should be removed and refitted in the new door shutter other required fittings are to be supplied by the Contractor. , 24 mm thick factory made PVC door shutters - 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm Plus minus 0.2 mm with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M S galvanised or plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws . The styles of the shutter reinforced by inserting galvanized M S tube of size 20x20 mm and 1 mm Plus minus 0.1 mm wall thickness . The lock rail made up of H section a uPVC hollow section of size 100x24 mm and 2 mm Plus minus 0.2 mm wall thickness fixed to the shutter styles by means of plastic or galvanised M.S U cleats . The shutter frame filled with a uPVC multi chambered single panel of size not less than 620 mm having over all thickness of 20 mm and 1 mm Plus minus 0 1 mm wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M S rod and fastened with nuts and washers complete as per manufacturer specification and direction of Engineer in charge . For W. C and bathroom door shutter. , white washing - Providing and applying two coats of white washing with lime on old work as per composition mentioned below to give an even shade including scaffolding etc upto floor four level complete including removing old white wash . composition - 5 litre water per kg Of lime for making cream fevicol DDL as per manufacturer recommendation Robin blue make P and G at the rate 5 gm per litre of lime wash . Lime powders blue . Fevicol DDL will be arranged by contractors . , water proofing cement paint - Providing and applying two coats of water proofing cement paint snowcem plus of Killick nikon ltd on old work including cleaning the surface with necessary repair patches upto 0.02 sqm with cement mortor 1 isto 4 upto floor four level including scaffolding etc. all complete as per specification and direction of Engineer in charge . , Premium Acrlic Smooth exterior paint - Finishing walls with Premium Acrlic Smooth exterior paint - whether coat with silicone additives of required shade - New work - Two or more coats applied at the rate 1.43ltr per 10 sqm over and including priming coat of exterior primer applied at the rate 2.20 kg per 10sqm as approved by Engineer in Charge , white cement based putty - Providing and applying white cement based putty of average thickness1 mm of approved brand and manufacturer over the lastered wall surface to prepare the surface even and smooth complete , acrylic emulsion paint - Providing and applying wall painting with acrylic emulsion paint of approved brand and manufacturer to give an even shade -Two or more coats , Cleaning of overhead water tank - Cleaning of overhead water tank upto 1000 litres capacity with water and flushing with water containing bleaching powder at the rate of 0.050 gm per litre of water and cleaning the same with fresh water tank should be cleaning properly disturbing Tank valves and float valves etc. and free from all particles and bactaria including finally checking bib cock for satisfactory flow of water. All complete as per specification and direction of Engineer in charge. , Renewing glass panes - Renewing glass panes Plain or frosted with putty and clips wherever necessary glass panes weighing 7.50 per sqm swastic brand super quality putty only be used . All material supplied by contractor , paver block - Providing and laying 60mm thick factory made coloured cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction of approved size design and shape laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand filling the joints with line sand etc. all complete as per the direction of Engineer in charge , Vitrified tiles - Providing and laying Vitrified tiles in different sizes thickness to be specified by manufacturer with water absorption less than 0.08 percent and conforming to IS - 15622 of approved make in all colours and shade in skirting riser of steps over 12 mm thick bed of cement mortar 1 isto 3 1 cement isto 3 coarse sand jointing with grey cement slurry at the rate 3.3kg per sqm including grouting the joint with white cement and matching pigments etc. complete Size of Tile 600x600 mm or as per instruction of Engineer in charge , ceramic glazed wall tiles - Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS isto 15622 thickness to be specified by the manufacturer of approved make in all colours shades except burgundy bottle green black of any size as approved by Engineer in Charge in skirting risers of steps and dados over 12 mm thick bed of cement mortar 1 isto 3 1 cement isto 3 coarse sand and jointing with grey cement slurry at the rate 3 3kg per sqm including pointing in white cement mixed with pigment of matching shade all complete as per specification and instruction of Engineer in charge , Orissa pattern W C pan - Providing and fixing and replacing existing white vitreous china water closet Orissa pattern W C pan of 580 mm size including cutting making good the wall and floors wherever required and disposal of existing W C Pan all complete as per specification and instruction of Engineer in charge , European type W C pan - Providing and fixing colour vitreous china pedestal type water closet European type W C pan with sit and lid 10 litre low level colored flushing cistern made of vitreous china with manually controlled device handle lever with all fitting and fixtures complete including cutting and making good the wall and a floors wherever required all complete as per specification and instruction of Engineer in charge , white vitreous china wash basin - Providing and fixing Flat back white vitreous china wash basin size 550x400 mm including cutting making all connections but excluding the cost of fittings all complete as per specification and instruction of Engineer in charge , Vitreous China Wash basin - Providing and fixing Coloured Vitreous China Wash basin size 550x400 mm with C I brackets 15 mm dia CP Brass single hole basin mixer of approved quality and make including painting of fittings and brackets cutting and making good the walls wherever required , mirror of superior glass - Providing and fixing 600x450mm bevelled edge mirror of superior glass of approved quality complete with 6mm thick hard board ground fixed to wooden cleats with C P brass screws and washers complete All materials supplied by the contractor Make Modi Guard , flushing cistern - Providing and fixing 10 litre capacity white P V C low level flushing cistern with manually controlled device handle lever conforming to IS isto 7231 with all fittings and fixtures complete , low level cistern - Providing and fixing coloured controlled flush low level cistern made of vitreous china with all fittings complete 10 litre full flush capacity , pedestal type W C pan - Providing and fixing solid plastic seat with lid for pedestal type W C pan complete - White solid plastic seat with lid , 15 mm bided or jet spray - Providing and fixing 15 mm bided or jet spray Make OMCO with all fitting and fixtures including all complete as per specification and instruction of Engineer in charge , C P brass shower rose - Providing and fixing C P brass shower rose with 15 or 20mm inlet C P shower rose supplied by the contractor Make OMCO 100 MM diameter , C P brass angle valve - Providing and fixing 15 mm nominal bore C P brass angle valve for basin mixer and geyser points of approved quality including all complete as per specification and instruction of Engineer in charge , brass stop cock - Providing and fixing C P brass stop cock concealed of standard design and of approved make to conforming to IS isto 8931 , close hole wall mixer tap - Providing and fixing C P brass close hole wall mixer tap of approved quality and make including all complete as per specification and instruction of Engineer in charge , 75 mmwaste and vent pipes - Providing and fixing soil waste and vent pipes including all complete as per specification and instruction of Engineer in charge -75mm dia Sand cast iron SandS pipe as per IS - 1729 , 100 mm waste and vent pipes - Providing and fixing soil waste and vent pipes including all complete as per specification and instruction of Engineer in charge 100mm dia Sand cast iron SandS pipe as per IS - 1729 , 75 mm plain bend - Providing and fixing plain bend of required degree 75mm dia Sand cast iron SandS as per IS 1729 , 100 mm plain bend - Providing and fixing plain bend of required degree 100mm dia Sand cast iron SandS as per IS -1729 , 15 mm G I pipes - Providing and fixing G I pipes complete with G I fittings including trenching and refilling etc. 15 mm dia nominal bore , 20 mm G I pipes - Providing and fixing G I pipes complete with G I fittings including trenching and refilling etc 20 mm dia nominal bore , 15mm normal bore G I Union - Providing and fixing 15mm normal bore G I Union in G I pipe including cutting and threading the pipe and making long screws etc complete New work , 20 mm normal bore G I Union - Providing and fixing 20mm normal bore G I Union in G I pipe including cutting and threading the pipe and making long screws etc complete New work , C P Brass extension nipple - Providing and fixing C P Brass extension nipple size 15mmx50mm of approved make and quality as per direction of Engineer in charge , P V C waste pipe 32 mm dia - Providing and fixing P V C waste pipe 32 mm dia for sink or wash basin including PVC waste fittings complete , C P brass bib cock - Providing and fixing 15 mm nominal bore C P brass bib cock of approved quality conforming to IS isto 8931 , brass bib cock - Providing and fixing 15 mm nominal bore brass bib cock of approved quality , Brass extension nipple - Providing and fixing C P Brass extension nipple size 15mmx50mm of approved make and quality as per direction of Engineer in charge , brass stop cock - Providing and fixing 15 mm nominal bore brass stop cock of approved quality , ball valve - Providing and fixing 15 mm nominal bore ball valve brass of approved quality High or lowpressure with plastic floats complete , renewal of old putty - Providing and fixing of putty in place of renewal of old putty of glass panes length , Excavating trenches - Excavating trenches of required width for pipes etc including excavation for sockets and dressing of sides ramming of bottom depth upto 1 50 M including getting out the excavated soil and then returning the soil as required in layer not exceeding 20cm depth including consolidating each deposited layer by ramming watering etc and disposing of surplus excavated soil as directed within a lead of 50M pipes cables etc not exceeding 80mm dia hard or dense soil , Surface dressing - Surface dressing of the ground including removing vegetation and inequalities clay etc not exceeding 15cm deep and disposal of rubbish lead upto 500 M and lift upto 1 KM , Transportation of excavated earth - Transportation of excavated earth from working site to other area load upto 1 km by mechanical transport including loading unloading and lift upto 2 20 M disposal earth to be levelled and neatly dressed as per instruction of Engineer in charge , Foundations or footings or bases of column etc. for mass concrete - Providing and fixing centering and shuttering including strutting propping etc and removal of form for isto Foundation footings bases of column etc for mass concrete , Lintels or beams or plinth beams or chujja or griders or bressumers and cantilevers - Providing and fixing centering and shuttering including strutting propping etc and removal of form for - Lintels beams plinth beams Chujja girders bressumers and cantilevers , water proofing treatment - Providing and laying four courses water proofing treatment with bitumen felt ISI mark 1322 or 1982 over the roofs chhujja consisting of first and third course of blown or and residual bitumen 30 or 40 grade applied hot at 1 45 kg or SqM of area for each course second course of roofing felt Hessian base type 3 grade 1 of specific graded and fourth and final course of stone grit 6mm and down size on pea sized gravel without dust spread of 6 dm3 per SqM including removing of old bitumen felt or bitumen cleaning of surface and preparation of surface and disposal of rubbish within a lead of 100 M all complete as per instruction of Engineer in charge Bitumen felt Hessian base type 3 grade 1 bitumen grade 30 or 40 Tarfelt make as per IS isto 1322 or 1982 , synthetic enamel paint - Supplying and laying Two or more Coats Painting with synthetic enamel paint of approved brand and manufacturer of required colour to give an even shade all complete as per specification and instruction of Engineer in charge , cement primer - Providing and applying one coat of cement primer internal walls surface of approved brand all complete as per specification and instruction of Engineer in charge , chain link - Providing and fixing G I chain link fabric fencing of required width in mesh size 50 x 50 mm including straightening with 2 mm dia wire or nuts bolts and washers as required complete as per the direction of Engineer in Charge Made of G I wire of dia 4mm , 18 mm thick granite - Providing and fixing 18 mm thick granite of any size colour and shade mirror polished premoulded and prepolished machine cut for kitchen platforms vanity counters window sills facias and similar locations of required size approved shade colour and texture laid over 20 mm thick base cement mortar 1 isto 4 1 cement isto 4 coarse sand joints treated with white cement mixed with matching pigment epoxy touch ups including rubbing curing moulding and polishing to edges to give high gloss finish etc all complete as per specification and instruction of Engineer in charge Total Quantity : 107898

Key Dates

Contact Information

Other Detail