|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as spsecified and directed. |
| 2 | M&L for coloured Glazed ceramic tiles of size 300x450x 7mm thick as in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match including rendering 10mm thick in cement mortar 1:4 finished rough to receive wall tiles etc., complete all as spsecified and directed. |
| 3 | M&L for Non skid ceramic colour tiles 7 to 8 mm thick area of each tile exceeding 0.09 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 4 | M&L for Non skid ceramic colour tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 5 | All as per item No. 4 abvoe but on vertical surfaces including 10mm thick screed plaser in CM 1:4 , complete all as specified and as directed. |
| 6 | Removing of surplus excavated/demolised materilas to a distance exc 50m but n.exc 100 mtr and deposited where directed at a level n. exc 1.5 m above the starting point complete all as spsecified and directed. |
| 7 | Dismantling of brick tiles or terracing tiles single layer on roof & disposal of retrived material upto a distance n.exc 100m complete all as spsecified and directed. |
| 8 | Demolition of mud in roof, any thickness including plastering and leaping ( where full thickness recoved or only a part there of disposal off rubbish upto a distance n.exc 100m, complete all as spsecified and directed. |
| 9 | M&L for PCC 1:2:4 type B0 using 12.5 mm graded crushed stone aggregate as in roof curbing, padding over roof slab complete all as specified and directed. (Note - Average thickness shall not exceed 40mm complete all as specified and directed. |
| 10 | M&L for rendering 10 mm thick on concrete surface when concrete is green on roof surface in cement mortar 1:4 complete all as spsecified and directed. |
| 11 | Supplying and applying High build elastomeric waterproofing coating based on pure, hydrophobic polyurethane, cold applied of spray / brush applied, SmartCare PU Magnum membrane with an elongation of 550% and tensile strength of 2.5 N/mm2 as per ASTM D 2370, crack bridging ability of 3mm as per ASTM C1305, no leakage upto 7 bars of water pressure as per DIN 1048, shore A Hardness of min. 45 as per ASTM D 2240. The system includes final base preparation, epoxy primer application and applying SmartCare PU Magnum or approved equivalent in two coats with a consumption of 1.5 Kg per SQM on a primed surface with SmartCare Primer and a 40 GSM geo textile cloth sandwiched in between, etc., complete as per Manufacturer's specifications |
| 12 | Supply only integral water proofing compound. |
| 13 | Repairing of roof cracks with crack filler chemical of Dr. Fixit wherever required to prevent roof leakage complete all as spsecified and directed. |
| 14 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exc1.5 but n. exc 4 Sqm each complete all as spsecified and directed. |
| 15 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area n exc 1.5 Sqm each complete all as spsecified and directed. |
| 16 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) complete all as spsecified and directed.Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 17 | All as per item No. 16 as above but of Frame size 50 x 125 mm. |
| 18 | S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction .Note: stainless steel butt hinges and necessary S S screws shall be paid separately. |
| 19 | S&F 30mm thick FACTORY MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company , Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (confirming as per S:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 Nos. M.S powder coated butt hinges size 100mmx25mmx2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube.Other hardwares should be fixed with 19x6mm size steel screws etc. Complete as per direction , manufacturer's specification & drawings. Please Enable Macros to View BoQ information |
| 20 | S&F 30mm thick FACTORY MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company , Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (confirming as per S:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 Nos. M.S powder coated butt hinges size 100mmx25mmx2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube.Other hardwares should be fixed with 19x6mm size steel screws etc. Complete as per direction , manufacturer's specification & drawings. Please Enable Macros to View BoQ information |