|
Tender for Excavation By Mechanical Means(Jcb Or Hydraulic Excavator) In Trenches For Pipe Lines With Straight Or Open Cutting In Streets Or Open Area Including And Dressing Sides Levelling Of Beds Of Trenches To Correct Grade, Cutting Joint Holes, Refilling Consolidation, Including The Cost Of , Diversion For Traffic, Crossing Over Trenches For Access To The Houses, Watching, Fencing, Etc. And Removal Of Surplus Soil Out Side/Inside The Town Involving Lead Upto 15 Meter Complete In All Respect. , Earth Work In Excavation In Foundations Trenches Etc. In All Kinds Of Soil Where Pick-Jumper Work Is Not Involved And Not Exceeding 2.0 Metres Depth Including Dressing Of Bottom And Sides Of Trenches, Stacking The Excavated Soil Clear From The Edge Of Excavation And Subsequent Filling Around Masonry In 15 Cm, Layers With Compaction Including Disposal Of All Surplus Soil As Directed Within Lead Of 30 Metres. , Providing And Filling Sand Grading As Per Specifications Or Fine Grade Around The Various Sizes Of G.I. Pipes In External Work. , First Class Burnt Brick Work Laid In Cement Sand Mortar 1:6 In Foundation And Plinth , 10 Mm Thick Cement Plaster With Cement Mortar 1:4 On Side Walls , 10 Mm Thick Cement Plaster With Cement Mortar 1:4 On Floors (Bed & Top Of Side Walls) , Providing Orange Colour Safety Footrest Of Minimum 6Mm Thick Plastic Encapsulated As Per Is:10910 On 12Mm Dia Steel Bar Confirming To Is: 1786 Having Minimun Cross Section As 23Mm X 25Mm And Over All Minimum Length 263Mm And Width As 165Mm With Minimum 112Mm Space Between Protruted Legs Having 2Mm Tread On Top Surface By Ribbing Or Chequering Besides Necessary And Adequate Anchoring Projections On Tail Length On 138 Mm As Per Standard Drawing And Suitable To With Stand The Bend Test And Chemical Resistance Test As Per Specification And Having Manufacturers Permanent Identification Mark To Be Visible Even After Fixing, Including Fixing In Manholes With 230X150x75cm Cement Concrete Block 1:2:4 (1 Cement: 2 Sand: 4 Stone Aggragate) Complete As Per Design. , Providing & Fixing Single Air Valve Isi Marked As Per Is-14845 Including Jointing All Carriages Complete (D) C.I Single Air Valve Screwed(Size 50Mm) , Providing And Laying, Jointing, Fixing, Testing Isi Marked G.I. Pipe (As Per Is 1239) Bclass, Including Cost Of Specials Such As Tees, Bends, Sockets Elbow Etc., Cutting, Threading And Testing In Trenches In The Ground Complete. (F) 50Mm Internal Diameter. , Construction Of Masonary Sluice Valve Chamber Excluding Sluice Valve Cover As Per Standard Design & Drawings Of Public Health Department. Size 0.6 M. X 0.6 M. Complete In All Respect. , Construction Of Masonary Sluice Valve Chamber Excluding Sluice Valve Cover As Per Standard Design & Drawings Of Public Health Department. Size 0.9 M. X 0.9 M. Complete In All Respect. , Cold Twisted Detormed (Ribbed/ Tor Steel) Bars (Fe 550 Grade As Per Is 1786-2008) , For Reinforced Cement Concrete Works, Where Not Including In The Complete Rate Of Reinforced Cement Concrete Including Binding, Bending And Placing In Position Complete , Shuttering For Faces Of Concrete Foundations And Foundation Beam & Plinth Beam (Vertical Or Battering) , Cement Conc.1:4:8 With Brick Balast 40Mm Gauge Mixing By Manual Means , Cement Conc.1:2:4 With Stone Ballast Or Shingle Mixing By Manual Means , Reinforced Cement Concrete Work Hand Mixed 1:2:4 For Slab Excluding Steel Reinforcement Up To 80 Kg Per Cum , Providing, Lowering In Trenches To Correct Gradient And Alignment, Jointing With Tyton Rubber Joint And Cutting Of Reinforced Cement Concrete Spigot And Socketed Pipes And Specials With Rubber Ring Isi Marekd As Per Is Code Is 458-2003 Into Trenches For All Depths And Laying Out The Same To Correct Alignment, Gradients, Levels Etc. Cutting Of Concrete Beds And Joints Holes, Supporting The Pipes And Specials In Correct Position In A Suitable Rigid Manner While The Same Are Being Jointed And Until The Surrounding Benchings, Haunches And Envelopes Are Completed. The Pipes Shall Rest On The Beds At All Joints Through Their Lengths And Fixing Of Rubber Ring, Facing, Testing The Pipes For Leakage And Making Good The Same Leakage And All Defects To The Entire Satisfaction Of The Engineer-In-Charge Including All Cartage Etc. Reinforced Cement Concrete Pipe Np -2 300Mm I/D Pipe (For Pucca Road Crossing) , Providing, Lowering In Trenches To Correct Gradient And Alignment, Jointing With Tyton Rubber Joint And Cutting Of Reinforced Cement Concrete Spigot And Socketed Pipes And Specials With Rubber Ring Isi Marekd As Per Is Code Is 458-2003 Into Trenches For All Depths And Laying Out The Same To Correct Alignment, Gradients, Levels Etc. Cutting Of Concrete Beds And Joints Holes, Supporting The Pipes And Specials In Correct Position In A Suitable Rigid Manner While The Same Are Being Jointed And Until The Surrounding Benchings, Haunches And Envelopes Are Completed. The Pipes Shall Rest On The Beds At All Joints Through Their Lengths And Fixing Of Rubber Ring, Facing, Testing The Pipes For Leakage And Making Good The Same Leakage And All Defects To The Entire Satisfaction Of The Engineer-In-Charge Including All Cartage Etc. Reinforced Cement Concrete Pipe Np -2 350Mm I/D Pipe (For Pucca Road Crossing) , Providing, Lowering In Trenches To Correct Gradient And Alignment, Jointing With Tyton Rubber Joint And Cutting Of Reinforced Cement Concrete Spigot And Socketed Pipes And Specials With Rubber Ring Isi Marekd As Per Is Code Is 458-2003 Into Trenches For All Depths And Laying Out The Same To Correct Alignment, Gradients, Levels Etc. Cutting Of Concrete Beds And Joints Holes, Supporting The Pipes And Specials In Correct Position In A Suitable Rigid Manner While The Same Are Being Jointed And Until The Surrounding Benchings, Haunches And Envelopes Are Completed. The Pipes Shall Rest On The Beds At All Joints Through Their Lengths And Fixing Of Rubber Ring, Facing, Testing The Pipes For Leakage And Making Good The Same Leakage And All Defects To The Entire Satisfaction Of The Engineer-In-Charge Including All Cartage Etc. Reinforced Cement Concrete Pipe Np -2 400Mm I/D Pipe (For Pucca Road Crossing) , Providing, Lowering In Trenches To Correct Gradient And Alignment, Jointing With Tyton Rubber Joint And Cutting Of Reinforced Cement Concrete Spigot And Socketed Pipes And Specials With Rubber Ring Isi Marekd As Per Is Code Is 458-2003 Into Trenches For All Depths And Laying Out The Same To Correct Alignment, Gradients, Levels Etc. Cutting Of Concrete Beds And Joints Holes, Supporting The Pipes And Specials In Correct Position In A Suitable Rigid Manner While The Same Are Being Jointed And Until The Surrounding Benchings, Haunches And Envelopes Are Completed. The Pipes Shall Rest On The Beds At All Joints Through Their Lengths And Fixing Of Rubber Ring, Facing, Testing The Pipes For Leakage And Making Good The Same Leakage And All Defects To The Entire Satisfaction Of The Engineer-In-Charge Including All Cartage Etc. Reinforced Cement Concrete Pipe Np -2 450Mm I/D Pipe (For Pucca Road Crossing) , Providing And Fixing Of Alfa Valve Of 140 Mm Dia Complete With Antitheft Mechanism Including All Tax And Charges. , Providing And Fixing Of Alfa Valve Of 150 Mm Dia Complete With Antitheft Mechanism Including All Tax And Charges. , Providing And Fixing Of Alfa Valve Of 160 Mm Dia Complete With Antitheft Mechanism Including All Tax And Charges. , Providing And Fixing Of Alfa Valve Of 180 Mm Dia Complete With Antitheft Mechanism Including All Tax And Charges. , Providing And Fixing Of Alfa Valve Of 200 Mm Dia Complete With Antitheft Mechanism Including All Tax And Charges. , Providing And Fixing Of Alfa Valve Of 225 Mm Dia Complete With Antitheft Mechanism Including All Tax And Charges. , Providing And Fixing Of Alfa Valve Of 250 Mm Dia Complete With Antitheft Mechanism Including All Tax And Charges. , Providing And Fixing Of Alfa Valve Of 300 Mm Dia Complete With Antitheft Mechanism Including All Tax And Charges. , Providing And Fixing Of Alfa Valve Of 350 Mm Dia Complete With Antitheft Mechanism Including All Tax And Charges. , Providing And Fixing Of Alfa Valve Of 400 Mm Dia Complete With Antitheft Mechanism Including All Tax And Charges. , Providing And Fixing Of Alfa Valve Of 450 Mm Dia Complete With Antitheft Mechanism Including All Tax And Charges. , Laying , Fixing, Jointing And Testing Of P.V.C. Pipes As Per Isi-4985 (Isi Marked With The Prior Approval Of Engineer-In-Charge) Along The Trenches And Laying The Same In Trenches To Correct Alignment And Gradients, Cutting, Jointing And Testing Complete As Per Specifications 140 Mm O/D Pvc Pipe Of 2.5 Kgf. / Sqcm , Laying , Fixing, Jointing And Testing Of P.V.C. Pipes As Per Isi-4985 (Isi Marked With The Prior Approval Of Engineer-In-Charge) Along The Trenches And Laying The Same In Trenches To Correct Alignment And Gradients, Cutting, Jointing And Testing Complete As Per Specifications 160 Mm O/D Pvc Pipe Of 2.5 Kgf. / Sqcm , Laying , Fixing, Jointing And Testing Of P.V.C. Pipes As Per Isi-4985 (Isi Marked With The Prior Approval Of Engineer-In-Charge) Along The Trenches And Laying The Same In Trenches To Correct Alignment And Gradients, Cutting, Jointing And Testing Complete As Per Specifications 180 Mm O/D Pvc Pipe Of 2.5 Kgf. / Sqcm , Laying , Fixing, Jointing And Testing Of P.V.C. Pipes As Per Isi-4985 (Isi Marked With The Prior Approval Of Engineer-In-Charge) Along The Trenches And Laying The Same In Trenches To Correct Alignment And Gradients, Cutting, Jointing And Testing Complete As Per Specifications 200 Mm O/D Pvc Pipe Of 2.5 Kgf. / Sqcm , Laying , Fixing, Jointing And Testing Of P.V.C. Pipes As Per Isi-4985 (Isi Marked With The Prior Approval Of Engineer-In-Charge) Along The Trenches And Laying The Same In Trenches To Correct Alignment And Gradients, Cutting, Jointing And Testing Complete As Per Specifications 225 Mm O/D Pvc Pipe Of 2.5 Kgf. / Sqcm , Laying , Fixing, Jointing And Testing Of P.V.C. Pipes As Per Isi-4985 (Isi Marked With The Prior Approval Of Engineer-In-Charge) Along The Trenches And Laying The Same In Trenches To Correct Alignment And Gradients, Cutting, Jointing And Testing Complete As Per Specifications 250 Mm O/D Pvc Pipe Of 2.5 Kgf. / Sqcm , Providing & Fixing 140 Mm Dia. Equal Tee (6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 160 Mm Dia. Equal Tee (6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 180 Mm Dia. Equal Tee (6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 200 Mm Dia. Equal Tee (6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 225 Mm Dia. Equal Tee (6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 250 Mm Dia. Equal Tee (6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 140 Mm Dia. Short Or Long Bend (90 Degree)(6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 160 Mm Dia. Short Or Long Bend (90 Degree)(6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 180 Mm Dia. Short Or Long Bend (90 Degree)(6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 200 Mm Dia. Short Or Long Bend (90 Degree)(6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 225 Mm Dia. Short Or Long Bend (90 Degree)(6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 250 Mm Dia. Short Or Long Bend (90 Degree)(6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 140 Mm Dia. Short Or Long Bend (45 Degree)(6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 160 Mm Dia. Short Or Long Bend (45 Degree)(6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 180 Mm Dia. Short Or Long Bend (45 Degree)(6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 200 Mm Dia. Short Or Long Bend (45 Degree)(6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 225 Mm Dia. Short Or Long Bend (45 Degree)(6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 250 Mm Dia. Short Or Long Bend (45 Degree)(6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 140 Mm Dia. Socket (6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 160 Mm Dia. Socket (6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 180 Mm Dia. Socket (6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 200 Mm Dia. Socket (6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 225 Mm Dia. Socket (6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 250 Mm Dia. Socket (6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 140 X 50 Mm Dia. Ms Service Saddle (6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 160 X 50 Mm Dia. Ms Service Saddle (6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 180 X 50 Mm Dia. Ms Service Saddle (6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 200 X 50 Mm Dia. Ms Service Saddle (6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 225 X 50 Mm Dia. Ms Service Saddle (6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 250 X 50 Mm Dia. Ms Service Saddle (6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 140 Mm Tail End Point 6Kg With M.S./C.I. Flange(6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 160 Mm Tail End Point 6Kg With M.S./C.I. Flange(6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 180 Mm Tail End Point 6Kg With M.S./C.I. Flange(6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 200 Mm Tail End Point 6Kg With M.S./C.I. Flange(6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 225 Mm Tail End Point 6Kg With M.S./C.I. Flange(6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 250 Mm Tail End Point 6Kg With M.S./C.I. Flange(6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 250 X 225 Mm Dia. Reducer (6 Kg/Cm2 Pressure) For Sluice Valve Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 200 X 180 Mm Dia. Reducer (6 Kg/Cm2 Pressure) For Sluice Valve Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 150 X 160 Mm Dia. Reducer (6 Kg/Cm2 Pressure) For Sluice Valve Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 150 X 140 Mm Dia. Reducer (6 Kg/Cm2 Pressure) For Sluice Valve Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing C.I/D.I Flanged End, Stem Of Ss (Ais 1410) And Bronze(Gunmetal) Working Parts Sluice Valves Isi Marked 14846-2000, Including Jointing , Testing & Cost Of Nut ,Bolt & Insertion Sheet, All Carriage Complete (With The Approval Of Engineer Incharge)(A) Class Pn-1 As Per Isi (C) 150 Mm I/D Sluice Valves Flanged , Providing & Fixing C.I/D.I Flanged End, Stem Of Ss (Ais 1410) And Bronze(Gunmetal) Working Parts Sluice Valves Isi Marked 14846-2000, Including Jointing , Testing & Cost Of Nut ,Bolt & Insertion Sheet, All Carriage Complete (With The Approval Of Engineer Incharge)(A) Class Pn-1 As Per Isi (C) 200 Mm I/D Sluice Valves Flanged , Providing & Fixing C.I/D.I Flanged End, Stem Of Ss (Ais 1410) And Bronze(Gunmetal) Working Parts Sluice Valves Isi Marked 14846-2000, Including Jointing , Testing & Cost Of Nut ,Bolt & Insertion Sheet, All Carriage Complete (With The Approval Of Engineer Incharge)(A) Class Pn-1 As Per Isi (C) 250 Mm I/D Sluice Valves Flanged , Providing & Fixing C.I/D.I Flanged End, Stem Of Ss (Ais 1410) And Bronze(Gunmetal) Working Parts Sluice Valves Isi Marked 14846-2000, Including Jointing , Testing & Cost Of Nut ,Bolt & Insertion Sheet, All Carriage Complete (With The Approval Of Engineer Incharge)(A) Class Pn-1 As Per Isi (C) 300 Mm I/D Sluice Valves Flanged , Providing & Fixing C.I/D.I Flanged End, Stem Of Ss (Ais 1410) And Bronze(Gunmetal) Working Parts Sluice Valves Isi Marked 14846-2000, Including Jointing , Testing & Cost Of Nut ,Bolt & Insertion Sheet, All Carriage Complete (With The Approval Of Engineer Incharge)(A) Class Pn-1 As Per Isi (C) 350 Mm I/D Sluice Valves Flanged , Providing & Fixing C.I/D.I Flanged End, Stem Of Ss (Ais 1410) And Bronze(Gunmetal) Working Parts Sluice Valves Isi Marked 14846-2000, Including Jointing , Testing & Cost Of Nut ,Bolt & Insertion Sheet, All Carriage Complete (With The Approval Of Engineer Incharge)(A) Class Pn-1 As Per Isi (C) 400 Mm I/D Sluice Valves Flanged , Providing & Fixing C.I/D.I Flanged End, Stem Of Ss (Ais 1410) And Bronze(Gunmetal) Working Parts Sluice Valves Isi Marked 14846-2000, Including Jointing , Testing & Cost Of Nut ,Bolt & Insertion Sheet, All Carriage Complete (With The Approval Of Engineer Incharge)(A) Class Pn-1 As Per Isi (C) 450 Mm I/D Sluice Valves Flanged , Provision For Restoration Of Branches/Sub-Branches Of Watercourses. , Wrought Iron And Mild Steel Ladders, Framed Grills, Grating Etc. Complete Fixed In Position In D-Tank. , Supply Of M.S Isa,Ismc,Ismb, Plate Etc , Welding By Gas Or By Electric Plant, Including Carriage To And From Workshop , Providing And Laying,Jointing,Fixing,Testing Isi Marked Gi Pipe B-Class, Including Cost Of Specials Such As Tees,Bends,Sockets,Elbow Etc, Cutting Threading And Testing In Trenches In The Ground Complete. (B) 20Mm Dia , Lowering Precast Concrete Np-2 Plain End Pipes And Collar With Reinforcement. In Trenches To Correct Gradient And Alignment,Cutting Of Reinforcement Cement Concrete Plain End Pipes,Stringing In Trenches,Jointing Ends And Fixing Collar With Cement Mortar 1:2 As Per Is 458:2003 Into Trenches For All Depths And Laying Out Same To Correct Alignment,Gradients,Levels Etc Complete In All Respect Reinforced Cement Concrete Np-2 150 Mm I/D Pipe. , Lowering Precast Concrete Np-2 Plain End Pipes And Collar With Reinforcement. In Trenches To Correct Gradient And Alignment,Cutting Of Reinforcement Cement Concrete Plain End Pipes,Stringing In Trenches,Jointing Ends And Fixing Collar With Cement Mortar 1:2 As Per Is 458:2003 Into Trenches For All Depths And Laying Out Same To Correct Alignment,Gradients,Levels Etc Complete In All Respect Reinforced Cement Concrete Np-2 200 Mm I/D Pipe. , Lowering Precast Concrete Np-2 Plain End Pipes And Collar With Reinforcement. In Trenches To Correct Gradient And Alignment,Cutting Of Reinforcement Cement Concrete Plain End Pipes,Stringing In Trenches,Jointing Ends And Fixing Collar With Cement Mortar 1:2 As Per Is 458:2003 Into Trenches For All Depths And Laying Out Same To Correct Alignment,Gradients,Levels Etc Complete In All Respect Reinforced Cement Concrete Np-2 250 Mm I/D Pipe. , Lowering Precast Concrete Np-2 Plain End Pipes And Collar With Reinforcement. In Trenches To Correct Gradient And Alignment,Cutting Of Reinforcement Cement Concrete Plain End Pipes,Stringing In Trenches,Jointing Ends And Fixing Collar With Cement Mortar 1:2 As Per Is 458:2003 Into Trenches For All Depths And Laying Out Same To Correct Alignment,Gradients,Levels Etc Complete In All Respect Reinforced Cement Concrete Np-2 300 Mm I/D Pipe. , Lowering Precast Concrete Np-2 Plain End Pipes And Collar With Reinforcement. In Trenches To Correct Gradient And Alignment,Cutting Of Reinforcement Cement Concrete Plain End Pipes,Stringing In Trenches,Jointing Ends And Fixing Collar With Cement Mortar 1:2 As Per Is 458:2003 Into Trenches For All Depths And Laying Out Same To Correct Alignment,Gradients,Levels Etc Complete In All Respect Reinforced Cement Concrete Np-2 350 Mm I/D Pipe. , Lowering Precast Concrete Np-2 Plain End Pipes And Collar With Reinforcement. In Trenches To Correct Gradient And Alignment,Cutting Of Reinforcement Cement Concrete Plain End Pipes,Stringing In Trenches,Jointing Ends And Fixing Collar With Cement Mortar 1:2 As Per Is 458:2003 Into Trenches For All Depths And Laying Out Same To Correct Alignment,Gradients,Levels Etc Complete In All Respect Reinforced Cement Concrete Np-2 400 Mm I/D Pipe. , Lowering Precast Concrete Np-2 Plain End Pipes And Collar With Reinforcement. In Trenches To Correct Gradient And Alignment,Cutting Of Reinforcement Cement Concrete Plain End Pipes,Stringing In Trenches,Jointing Ends And Fixing Collar With Cement Mortar 1:2 As Per Is 458:2003 Into Trenches For All Depths And Laying Out Same To Correct Alignment,Gradients,Levels Etc Complete In All Respect Reinforced Cement Concrete Np-2 450 Mm I/D Pipe. , Earthwork Undressed Involving An Avg. Horizontal Throw Upto 2 Mtr. And An Avg. Vertical Lift Upto 0.5 Mtr. Including Breaking Of Clods , Earthwork Undressed With Combined Lead Upto 15 Mtr. Including Breaking Of Clods. , Dressing Of Earthwork New Work Or Remodelling Of Earthwork , Excavation Of Soil Using Hyraulic Excavator And Hydraulic Tractor Trolly I/C Cutting And Loading In Trolly And Transporting To The Embankment Locations With All Lifts And Leads Excluding Royalty. , Re-Handling Of Earthwork Recently Executed , Earth Filling With Ordinary Soil In 15 Cm Layers Including, Ramming, Watering And Consolidating Lead Upto 30M , Dag-Belling With Single Kassi Stroke Minimum 7.5 Cm Depth. , Dressing Of Bed And Preparation Of Sub-Grade For Lining , Supplying And Fixing Of Reinforced Cement Concrete Shutter And Frames For Nakka And Branch Offtakes , Supplying & Laying Dry Brick Bats , Any Other Item
|