|
| 1 | S&F of extruded Aluminum anodised handles 150 mm long, fabricated type, complete all as specified and directed. |
| 2 | S&F of Aluminium anodised barrel tower bolts 150 mm long of extruded section, complete all as specified and directed. |
| 3 | S&F of 16mm dia Aluminium anodised sliding door bolts with hasp and staple (bolt type) and fixing clips of sheets,cast or extruded type 300mm long, plate type, complete all as specified and directed. |
| 4 | S&F of Aluminium anodised 100 mm long hasp & staple type, incl bolt to hinge plate and fix with screws complete all as specified and directed. |
| 5 | S&F of Aluminium anodised floor door stopper 140 mm with hard drawn steel spring long, complete all as specified and directed. |
| 6 | S&F of Butt hinges, 75 mm size, medium weight, cold rolled mild steel, complete all as specified and directed. |
| 7 | S&F of Butt hinges, 100 mm size, medium weight, cold rolled mild steel, complete all as specified and directed. |
| 8 | S&F in repair of Butt hinges with galvanised MS hinge pin, 100 mm size, aluminium anodised extruded, B-21 type, complete all as specified and directed. |
| 9 | S&F of MS ordinary rat tail rod pattern springs of size 300mm incl roller & roller plate, in wooden chaowkhats/Steel frame with welding complete all as specified and directed. |
| 10 | S&F in repair EPDM rubber gasket /Glazing bead packing around the glass complete all as specified and as directed. |
| 11 | S&F GI wire cloth 0.63 mm nominal dia of wire and average width of apperture 1.40mm and fixed with stainless steel staples in steel/wooden /aluminium frames complete all as specified and as directed by the Engr-in-Charge. |
| 12 | S&F 3mm thick sheet glass ordinary quality and glazing type, not exc 0.50 sqm in each pane, after and including hacking out broken glass from wooden/metal surfaces complete all as specified and as directed by the Engr-in-Charge. |
| 13 | S&F 3mm thick firured glass, pin headed type and glazing with oil putty in squares n. exc 0.5 sqm in each pane after and including hacking out broken glass from wooden/metal surfaces complete all as specified and as directed by the Engr-in-Charge. |
| 14 | Taking down and Refixing in the same opening of door/window/cupboard wooden/Aluminium shutter of any description not exceeding 1 Sqm each including easing and adjusting as required complete all as specified and as directed by Enineer-in-charge |
| 15 | All as per item No above but exceeding 1 Sqm and not exceeding 2 Sqm |
| 16 | Taking down chowkhats or frames of any description n exc 1.5 sqm each (without taking off shutters from the frame) Note: Including cutting of hole as required at site for taking down and making good of disturbed portion with brick work of CM 1:6 or PCC 1:2:4. |
| 17 | - ditto as per above but exc 1.5sqm and n exc 4sqm each - do -. |
| 18 | Taking down wooden/steel shutters of any description n. exc 2 sqm each complete all as specified and as directed by Enineer-in-charge |
| 19 | S&F 125 mm x 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinge lock strike plate ect including one shop coat of red oxide primer including cutting holes and making good in PCC 1:2:4 type B1 using 20 mm graded stone aggregate complete all as specified and as directed.Note :- 10 mm deformed bar shall be provided in bottom of frame & PCC filling demate to be included will be provided in hollow frame in same rate. |
| 20 | S&F 105 mm x 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinge lock strike plate ect including one shop coat of red oxide primer including cutting holes and making good in PCC 1:2:4type B1 using 20 mm graded stone aggregate complete all as specified and as directed.Note :- 10 mm deformed bar shall be provided in bottom & PCC will be provided in hollow frame in same rate. |
| 21 | S&F for 30mm thick locally fabricated flush door shutters solid core construction with block board core and ply wood face panels commercial type on both faces complete all as specified and as directed. |
| 22 | S&F 30mm thick locally fabricated 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) fitted to chowkhats complete all as specified and as directed. |
| 23 | S&F of door seal 45 to 50 mm wide and 5 mm thick fixed to wooden doors shutter with screws, complete all as specified and directed. |
| 24 | M&L Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing. |
| 25 | S&F for Factory made solid panel PVC door shutter 30mm thick prelam (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at siteall as per direction of Engineer-In-Charge. Make : Rajshri /Black Cobra |
| 26 | S&F framed work such as grills, grating, etc, with ends of bars shouldered and or riveted, or froged in to spikes framed guard bars, barred iron doors, ladders, or similar work confirming to Fe 290 Gde-E-165. |
| 27 | M&L for 2nd class hard wood for plain, solid, straight chowkats and frames for doors, wondows, ventilators etc. wrough, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints and fixed in position. |
| 28 | S&F 18 mm thick prelaminated particle board Exterior grade, prelaminated laminations one side and other side balancing white, fixed with screws to timber frame work including 2nd class hard wood beading on cutting exposed edges, polishing complete as in palmate boxes and kitchen cabinet and cupboard or in any type complete all as directed. |
| 29 | S&F 18 mm thick WPC board, prelaminated laminations one side and other side balancing white, fixed with screws to timber frame work including beading on cutting /exposed edges, complete as in palmate boxes and kitchen cabinet and cupboard or in any type complete all as directed.Make : Rajshri /Black Cobra |
| 30 | S&F stainless steel handles 100mm size for kitchen cabinet shutters complete all as specified and directed. |
| 31 | S&F continuous (piano) hinges, mild steel bright finish in electro galvanized width of flat (when open) in 30mm, complete all as specified and directed. |
| 32 | S&F of magnatic catcher for cupboard and kitchen cabinets, complete all as specified and directed. |
| 33 | S&F of MS powder coted pegset, solid body,175mm to 250mm with 6 hooks, complete all as specified and directed. |
| 34 | S&F powder coated aluminium frame straight for doors/windows/partitions using aluminium section of minimum size 100mmx44mmx2.00mm thick, 31mmx12mmx3.00mm thick & 49.91x44.45x1.3 mm thick and etc. fixed in position by means of steel screws and patent rawl plugs / bolts / hold fasts of suitable size complete all as specified and directed |
| 35 | S&F 12 mm thick prelaminated particle board exterior grade both side laminated and fixed to aluminium frame all as specified. |
| 36 | M&L for powder coated anodised aluminium door shutter fabricated out of aluminium section 1.60mm thick with top rail and stiles of size 83x44mm, lock and bottom rail of size 100x44mm, (two panels) with and including 12mm thick plain colour prelaminated particle board exterior grade and 3.5 mm thick ordinary sheet glass duly covered with tinted solar control film, including jointing cleats, glazing clips, rubber packing, aluminium anodised snap beading, screws, anodised aluminium fittings such as hinges (B-21) handles (disc type), tower bolts (200mm long), locking device with duplicate keys complete all as specified and directed. |
| 37 | M&L for powder coated anodised aluminium door shutter fabricated out of aluminium section 1.60mm thick with top rail and stiles of size 83x44mm, lock and bottom rail of size 100x44mm, (two panels) with and including 12mm thick plain colour prelaminated particle board exterior grade and 3.5 mm thick ordinary sheet glass duly covered with tinted solar control film, including jointing cleats, glazing clips, rubber packing, aluminium anodised snap beading, screws, anodised aluminium fittings such as hinges (B-21) handles (disc type), tower bolts (200mm long), locking device with duplicate keys complete all as specified and directed. |