|
| 1 | Excavation in foundation trenches etc. in earth work lift up to 1.5 mtrs. Stacking the excavated soil not more than 3 metres away from the edge of excavation and then returning the stacked soil in 15 cm layers when required in to plinth and sides of foundations, consolidating each deposited layer by ramming , watering and then disposing of all surplus excavated earth as directed with in a lead of 20 metres in pick jumper work. |
| 2 | P/LCEMENT CONCRETE 1:4:8 (1CEMENT : 4 SAND : 8 GRADED STONE AGGRREGATE 40mm NOMINAL SIZE) & CURING COMPLETE IN FOUNDATION & PLINTH within all leads and lifts as per the direction and to the entire satisfaction of the Engineer -in-Charge. |
| 3 | Providing and laying cement concrete 1:11/2 :3 ( 1cement: 1 1/2 sand: 3graded stone aggregate 20 mm nominal size )and curing complete excluding the cost of form work and reinforcement in:- |
| 4 | I) Foundation and plinth within all leads and lifts as per the direction and to the entire satisfaction of the Engineer -in-Charge. |
| 5 | ii) Walls(any thickness but ot less than 0.1 mtr thickness) attached pilasters, buttresses, plinth and string courses etc. from top of foundation level up to floor two level within all leads and lifts as per the direction and to the entire satisfaction of the Engineer -in-Charge. |
| 6 | Providing form work of steel plates so as to give a rough finish including centering ,shuttering, propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for-in-situ reinforced concrete and plaiin concrete work in:- |
| 7 | Ii) Vertical surface such as walls(any thickness) partitions and the like including attached pillasters, butteresses, plinth and string courses and the like within all leads and lifts as per the direction and to the entire satisfaction of the Engineer -in-Charge. |
| 8 | Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete up to floor two level within all leads and lifts as per the direction and to the entire satisfaction of the Engineer -in-Charge. |
| 9 | PROVIDING & LAYING IN POSITION CEMENT CONCRETE 1:3:6 (1 CEMENT:3 COARSE SAND:6 GRADED STONE AGGREGATE 20 MM NOMINAL SIZE) EXCLUDING THE COST OF CENTRING & SHUTTERING IN ALL WORKS UPTO PLINTH LEVEL within all leads and lifts as per the direction and to the entire satisfaction of the Engineer -in-Charge. |
| 10 | 20 MM CEMENT PLASTER OF CEMENT MORTAR 1:4 (1 CEMENT: 4 FINE SAND) COMPLETE IN ALL RESPECT WITHIN ALL LEADS & LIFTS AS PER THE DIRECTION & TO THE ENTIRE SATISFACTION OF THE ENGINEER-IN-CHARGE. |
| 11 | DISTEMPERING WITH DRY DISTEMPER OF APPROVED BRAND & MANUFACTURE (TWO OR MORE COATS) OF REQUIRED SHADE ON NEW WORK, OVER & INCLUDING WATER THINNABLE PRIMING COAT TO GIVE AN EVEN SHADE COMPLETE IN ALL RESPECT WITHIN ALL LEADS & LIFTS AS PER THE DIRECTION & TO THE ENTIRE SATISFACTION OF THE ENGINEER-IN-CHARGE. |
| 12 | PAINTING (TWO OR MORE COATS) ON RAIN WATER, SOIL WASTE & VENT PIPES & FITTINGS WITH SYNTHETIC ENAMEL PAINT OF APPROVED BRAND & MANUFACTURE & REQUIRED COLOUR OVER A PRIMING COAT OF APPROVED STEEL PRIMER ON NEW WORK (150 MM DIAMETER PIPES) COMPLETE IN ALL RESPECT WITHIN ALL LEADS & LIFTS AS PER THE DIRECTION & TO THE ENTIRE SATISFACTION OF THE ENGINEER-IN-CHARGE. |
| 13 | Providing and fixing Cera/Hindware make double symphonic “P” or “S” trap WC pan (two piece ) complete in all respect. With built in cistern 10 litr capacity of required shade (CRUSE 2018) WC-1with in all leads and lifts |
| 14 | Providing and fixing Cera/Hindware make double symphonic “P” or “S” trap WC pan (indian type ) complete in all respect. WC-2 with in all leads and lifts |
| 15 | Providing and fixing 10 litr vitreous china high level flushing cistern of Hindware/ Cera make with in all leads and lifts |
| 16 | Providin and fixing plastic seat cover solid type ISI mark of reputed make within all leads and lifts and to entire satisfaction of Engineer-in-charge. |
| 17 | Providing and fixing vitreous china 55x40cm flat back wash basin ( White colour) with MS brackets duly painted (cornet-1008 of Cera/Hindware make.)with in all leads and lifts |
| 18 | Providing and fixing PVC waste pipe 32mm nominal dia for wash basin and sink ISI mark of reputed make within all leads and lifts and to entire satisfaction of Engineer-in-charge. |
| 19 | Providing and fixing M.I. Union for wash basin or sink with in all leads and lifts |
| 20 | Providing and fixing 450x600mm bevelled edge mirror of reputed make mounted on AC sheet and fixed with brass screws with in all leads and lifts. |
| 21 | Providing chromium plated brass soap dish with brass bracket of reputed make within all leads and lifts and to entire satisfaction of Engineer-in-charge. |
| 22 | Providing and fixing 15mm angle valve ISI (Heavy duty) ISI mark of reputed make within all leads and lifts and to entire satisfaction of Engineer-in-charge. |
| 23 | Providing and fixing PVC connection 15mm of superior quality within all leads and lifts and to entire satisfaction of Engineer-in-charge. |
| 24 | Providing and fixing 100mm dia CP grating for floor traps of superior quality within all leads and lifts and to entire satisfaction of Engineer-in-charge. |
| 25 | Providing & fixing CP 15mm dia short body bib tap ISI mark of reputed make within all leads and lifts and to entire satisfaction of Engineer-in-charge. |
| 26 | Providing and fixing spray flushing jet ISI mark of reputed make within all leads and lifts and to entire satisfaction of Engineer-in-charge. |
| 27 | Providing and fixing GMS tube (heavy class) ISI mark of reputed make within all leads and lifts and to entire satisfaction of Engineer-in-charge.including GI fitting of following dia:- |
| 28 | 15mm dia |
| 29 | Providing and fixing PVC pipe ISI mark of reputed make within all leads and lifts and to entire satisfaction of Engineer-in-charge. |
| 30 | 100 mm dia |
| 31 | 75 mm dia |
| 32 | Providing and fixing PVC door bend ISI mark of reputed make within all leads and lifts and to entire satisfaction of Engineer-in-charge. |
| 33 | a) Door bend |
| 34 | Providing and fixing PVC Plain bend ISI mark of reputed make within all leads and lifts and to entire satisfaction of Engineer-in-charge. |
| 35 | a) Plain bend 100 mm dia |
| 36 | a) Plain bend 75 mm dia |
| 37 | Providing and fixing PVC water tank 500 ltr capacity within all leads and lifts as per the direction and to the entire satisfaction of the Engineer -in-Charge. Please Enable Macros to View BoQ information |