|
Tender for Cpp And Shaftingwartsila/4E1540r-Hb Typemt - 271101 O1 Sample Oil From The Hub And Undertake Analysis.Details Of Oil - Hlp 46, , Steering Gear Systemmake/ Model - Veljan Hydrair P11p2r1c4a2bmt - 430102 Sr4 Carry Out Chemical Analysis , Analysis Of Lub Oil, Coolant, Hydraulic Oil And Portable Water. Payment At Actuals Analysis Of Lub Oil, Coolant And Portable Water Of All Main Engines, Diesel Alternators, Gear Boxes And Auxilary Machineries To Be Carried Through Nabl Certified Laboratry And Two Copies Of Each Report To Be Submitted Within 24 Hours Of Test Undertaken. , (A) Lub Oil Test(I) Basic Test:- The Basic Test Of Lub Oil Should Covers The Following:-(A) By Using Method Of Astm D445 :- (Aa) Viscosity @ 40 Degree C (Cst) (Ab) Viscosity @ 100 Degree C (Cst) (Ac) Viscosity Index (Calcuated) , B) Water Content (% Vol) By Astm D95 Method.(C) Flash Point ( Degree Centigrade) By Astm D92 Method(D) Tbn (Mg Koh/G)) By Astm D644 Method(E) Tan (Mg Koh/G)) By Astm D644 Method , (Ii) Advance Test :- The Advance Test Of Lub Oil Should Covers The Following By Using Astm D5185 Method:-(A) Wear Metalic Particals Of Fe, Cr, Ni, Al, Cu, Sn, Pb And Ag To Be Analised In Terms Of Ppm In The Given Samples Of Lub Oil.(B) Contaminants Of Si, Na And Mg To Be Analised In Terms Of Ppm In The Given Samples Of Lub Oil. , (B)Coolant Test / Fresh Water Additive Test:- The Following Parameters To Be Analysis For Given Sample:(I) Ph Value(Ii)Chloride Content(Iii) Percentage Of Inhibitor(Iv) Hardness(V) Any Other Test Required. , (C) Potable Water Test To Be Carried Out To Acertain The Suitablity For Drinking Water , Analysis Of Lube Oil, Coolant, Hydraulic Oil And Portable Water Of All Main Enignes, Das, Gear Boxes, Auxiliary Machinery, Deck Handling Gear To Be Carried Out Thorugh Nabl Certified Lab And Two Copies Of Each Report To Be Submitted Within 24 Hrs Of Test Undertaken. Payment At Actuals(A) Lube Oil Test By Using Method Of Astm D445(I) Viscosity @ 400C (Cst)(Ii) Viscosity @1000C Degree (Cst)(Iii) Viscosity Index (Calculated)(B) Water Content (% By Volume) By Astm D95 Method(C) Flash Point By Astm D95 Method(D) Tbn (Mg Koh/G) By Astm D644 Method(E) Tan (Mg Koh/G) By Astm D644 Method(F) Coolant Test/ Fresh Water Addetive Test. Following To Be Analysed:(I) Ph Valve(Ii) Cloride Content(Iii)Percentage Of Inhibitor(Iv) Hardness(G) Portable Water Test To Be Carried Out To Ascertain Suitability Of Drinking Water. , (E) Provision Of Containers/ Sample Bottles: - Standard Containers/ Sample Bottles (Capacity Of 250 Ml, Qty 300) To Be Provided By Vendor For Landing The Samples Of Lub Oils, Coolants, Hydraulic Oils Etc For Analysis. Payment As Per Actuals.
|