|
| 1 | Notes: -(i) Please refer Schedule 'A' Notes of tender documents.(ii) Schedule 'A' Part-XIII are not estimated by MES and the estimated rate indicated as \\"Rs. 0.00\\" under Col.5 signifies this fact only.(iii) In case rate of any item is not quoted by the bidder, the rate for the same item will be considered as zero and no claim in this regard at later date will be entertained. |
| 2 | LUMPSUM/ OTHER PRE-PRICED PROVISIONAL SCHEDULES OF WORKS |
| 3 | Lump sum price worked out by the contractor for BUILDING WORKS as listed in Schedule 'A' Part-I brought forward from Pre Priced Schedule. |
| 4 | Lump sum price worked out by the contractor for INTERNAL ELECTRIC SUPPLY WORKS as listed in Schedule 'A' Part-II brought forward from Pre Priced Schedule. |
| 5 | Lump sum price worked out by the contractor for INTERNAL WATER SUPPLY WORKS as listed in Schedule 'A' Part-III brought forward from Pre Priced Schedule. |
| 6 | Lump sum price worked out by the contractor for SEWAGE DISPOSAL WORKS listed in Schedule 'A' Part-IV brought forward from Pre Priced Schedule. |
| 7 | Lump sum price worked out by the contractor for ROAD, PATH & CULVERT WORKS as listed in Schedule 'A' Part-V brought forward from Pre Priced Schedule. |
| 8 | Lump sum price worked out by the contractor for AREA DRAINAGE WORKS as listed in Schedule 'A' Part-VI brought forward from Pre Priced Schedule. |
| 9 | Lump sum price worked out by the contractor for PROTECTIVE WORKSas listed in Schedule 'A' Part-VII brought forward from Pre Priced Schedule. |
| 10 | Lump sum price worked out by the contractor for EXTERNAL ELECTRIFICATION WORKS as listed in Schedule 'A' Part-VIII brought forward from Pre Priced Schedule. |
| 11 | Lump sum price worked out by the contractor for SITE CLEARANCE & EARTHWORKS as listed in Schedule 'A' Part-IX brought forward from Pre Priced Schedule. |
| 12 | Lump sum price worked out by the contractor for EXTERNAL WATER SUPPLY WORKS as listed in Schedule 'A' Part-X brought forward from Pre Priced Schedule. |
| 13 | Lump sum price worked out by the contractor for DEMOLITION/DISMANTLING WORKS as listed in Schedule 'A' Part-XI brought forward from Pre Priced Schedule. |
| 14 | Lump sum price worked out by the contractor for Defective Works as listed in Schedule 'A' Part-XIII brought forward from Pre Priced Schedule. |
| 15 | Schedule 'A' Part-XIV MISC WORK(A) INTERNAL ELECTRIFICATION WORKS |
| 16 | Supply and fix ENDURA PEARL New generation energy saving and environment friendly long life LED street light fitting 20W LED 5700 K in and including LED lamps made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having top opening separate driver compartment with IP 65 protection and impact resistance of IK07 and testing on completion including GI wall mounting bracket 32 mm dia 1.2Mtr long incl 120 degree bend with 02 No FI clamps 25x3mm size with necessary nut bolts etc complete all as specified and directed. Make: Havells Cat part No ENDURAOEARLLSL20WLED757SASYTOPC/Equivalent in Philips, CG. |
| 17 | Supply and fix ceiling fan of size 1200 MM Having (BEE 5 Star rating) sweep complete and connecting up including provision of with copper standard conductors cables from ceiling rose/connector to fan complete all as specified and directed. Make: Bajaj/Havells/CG |
| 18 | Supply and fix mirror light fitting 1x10 watt with LED Lamp etc, Completed with all accessories and including connecting up with 3 core twisted flexible copper conductor cable with suitable size of 230 50 HZ complete all as specified and directed. |
| 19 | Supply and fix exhaust fan ventilining type of heav duty AC single phase 230V/240V 50 Hz of size, 300mm sweep 1400 rpm and complete with louvers, shutter and connecting up ceiling rose to connector bloack of fan including making of holes and grouting of nuts and bolts complete all as specified and directed. Make: Havells/Crompton/Khaitan |
| 20 | Supply and fix Wall fan of size 400 MM sweep and connecting up ceiling rose to connector block of fan including grouting of nut & bolts completed all as sepcified and directed. |
| 21 | Supply and fix Endura Linear Neo Surface and wall mounted LED batten, 20 W LED tube (4 ft) having minimum 2000 lumens with epoxy coated white extruded aluminium channel housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver, high efficiency long life LED chips with lumen efficacy of 125 lumen/watt with a viewing angle of 120 degree to ensure better lumen output, milky white special polycarbonate diffuser for glare free efficient light distribution elegantly designed white coloured ABS end caps, integral electronic (SMPS based constant current supply) with output short circuit protection, surge protection as per IS: 15885 Part-2 (sec 13), voltage range 140-270V, colour temperature of 5700K>100Im/w system luminous efficiency and power factor>0.95 and incl 20 w LED tube complete with all eccessories as sepcified and directed. Make: Havells Model No. LHCDEFXD5L8R020HFXCEPITNNW020 or equivelent in Bajaj/CG. |
| 22 | Supply and Fix MCB 40 Amps 230 Volts 50 Hz SPN 15 KA with fixed thermal magnetic releasing system incl making connection with existing cable with connection materials like copper strips lugs nuts bots with sheet metal enclosure suitable for one single MCCB complete all as specified as directed. |
| 23 | Supply and Fix MCB 63 Amps 230 Volts 50 Hz SPN 15 KA with fixed thermal magnetic releasing system incl making connection with existing cable with connection materials like copper strips lugs nuts bots with sheet metal enclosure suitable for one single MCCB complete all as specified as directed. |
| 24 | Supply and Fix MCB SP 240V, 50 Hz, 10 KA, B curve of rating (0.5-6 Amp) complete all as specified as directed. |
| 25 | Supply and Fix MCB SP 240V, 50 Hz, 10 KA, B curve of rating 16 Amp complete all as specified as directed. |
| 26 | Supply and fixing sub main wiring with two runs of single core FRLS PVC insulated stranded copper conductor 4 Sqmm and one run of 4 Sqmm for earth continuous earth wire inlcuidng suitable PVC conduit medium grade ISI marked all as specified and directed.Note : Two runs of PVC cable 4 sqmm & one runs of earth wire 4 sqmm will be considered as one unit. |
| 27 | (B) INTERNAL WATER SUPPLY WORKS |
| 28 | S&F angle valve cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe or for unions and fixed complete all as specified and directed. |
| 29 | (C) ROAD, PATH & CULVERT WORKS |
| 30 | Road marking with reflective thermoplastic screed 2.5mm thick using thermoplastic road marking paint of approved brand(white or yellow) including admixture layer of glass beads confirming to BS-6088 and most specification by using automatic mechanical road marking machine including cleaning of all dirt, scales, oil, grease and foreign material etc; complete all as directed. Makes : Asian Paints/Shivalik Prismo India Pvt ltd/ Reliance |
| 31 | Uni/dual/tri-directional acrylic plastic reflectors cat eye of ABS material having size 100mmx100mmx200mm with celluler lence design alloy to continue functioning even after impact/damage in white/red/yellow fixed with special hot melt bitumen adhesive to road and including taking down of old unservisible plastic reflector cat eye complete all as specified and as directed. |
| 32 | (D)EXTERNAL ELECTRIC SUPPLY WORKS |
| 33 | Supplying and Fixing on load change over switch in sheet metal enclosure suitable for 63 Amps four pole front handle operated AC 22 categorynconfirming to IS :13947-3 415 volt AC 50 HZ including provision of cable entry of 50 Sqmm 3.5core all as specified and directed. |
| 34 | Supply, installing, testing & commissioning of CPRI approved LT panel board, outdoor type, cubical, dust and vermin proof made out of 3.15 mm thickness MS sheet and 50x50x6mm with front and back door openable type fitted with nuts, bolts and washers fitted with knobs and ginges and air vents incl painting with two coats of enamelled paint over a coat of red oxide primer, suitable for 415 V , 50 Hz, 3 phase, 4 wire suitable for and incl the following :-(a) MCCB conforming to IS-13947(P-2) 4 pole, 100 Amps,415 Volt,AC 50 HZ adjustable type, breaking capacity 35/36 KA- 01 No.(b) MCCB conforming to IS-13947(P-2) 3 pole, 63 Amps,415 Volt,AC 50 HZ adjustable type, breaking capacity 25 KA- 02 Nos.(c) MCB TPN 32 Amps B series 415 Volt,AC 50 HZ - 01 No (d) Digital voltmeter 0-500 V-01 No(e) Digital Ameter with CT 0-200 Amps-01 No(f) LED indicator lamp-03 Nos(g) Copper bus bar chamber of capacity with insulated copper bus bar of 200Amps TPN with bub bar insulator-01 (j) Internal wiring with suitable size single core copper conductor cable of Red, Yellow, Blue and black colour including lugs, ferrule, tag etc. |
| 35 | (E) DG SET WORKS |
| 36 | Supply, install, commissioning and testing complete silent Diesel Engine driven generating set with canopy and accoustics as per guide line issued by CPCB and environment act ( 415 volts, AC supply 3 Phase, 50 HZ , 4 wire system of supply) with panel of automatic starting omn main failure control suitable of giving an output of 50 KVA or of next higher capacity as available/manufactured after considering power factor as per IS-10001/10002 and alternator as per IS-13364 complete at 1610 metre altitude above mean sea level and capacity of operating between temperature range minus 15 degree celcius to plus 35 degree celcius in Sonamarg area of J&K and alternature of suitable capacity coupled with each other and capable of taking 10% over load for one hour in every 12 hours as per BS-5514/649 with flexible coupling mounted on common base plate on anti vibration pads on foundation recommended by manufacturer. The DG set shall comprise of electric starter motor with batteries turbocharger water cooled and comprising all standerd fittings/fixtures all piping etc water cooled/with radiator complete with inbuilt tank of capacity as per manufacturer specifications and shall comprise the following :- |
| 37 | (A) Diesel Driven Engine : Developing a net rated output of 100 BHP or next higher capacity suitably matched with alternator to give a net rated output of 50 KVA. The engine should be capable of delivering the required output of 1500 RPM as per BIS 649 under NTP condition with a provision of 10% over load for one hour in every 12 hours and interalia with the following accessories all as specified:-(i) Fly wheel to suit flexible coupling and fly wheel housing.(ii) Air cleaner complete as per manufacturer specifications.(iii) Fuel injection rotarty nozzle pump.(iv) Electric governor.(v) Oil filter and mounting.(vi) Flexible coupling with guard nuts and bolts. (vii) Fuel filter and mounting. viii. Lubricating oil pump and oil cooled. ix. Starter motor as per manufacturer design. x. Lubricating oil cooler. xi. Exhaust silencer, industrial type with exhaust pipe of length, beyond impeller from wal from DG set room. xii. Drip tray xiii. Battery charger of suitable cap fitted with transformer/Rectifier unit DC ammeter/off/trickle/ boost switch, DC volt meter and other standard fitting hour running meter, kwh meter etc. xiv. 02 nos maintenance free battery 180 AH, 12 volt. xv. Cold start kit. |
| 38 | (B) ALTERNATOR :- The -+above engine will be coupled through flexible coupling on an indigenous alternator mounted on strong steel fabricated common base frame suitable for mounting in an acoustic. The alternator will be 3 phase 50 HZs 1500 RPM self-regulating self-exciting type and generating 50 KVA out put at 0.8 power factor 4 wire 415 volts AC supply under NTP condition with a provn of 10% overload for 1 hour in every 12 hours running at 1500 RPM, the alternator shall be screen protected and fitted with shield ball/roller bearing conforming to BS 2613/is 4722. |
| 39 | (C) MANUAL CONTROL PANEL :- The control panel body will be fabricated out of 16 SEG MS sheet. Panel will be suitable for canopy mounting indoor installation, dust & vermin proof, copper control cable of suitable size is used. Cable are ferruled for proper maintenance/checking/wiring of panel. Detachable cable gland plates are provided. The panel will be equipped as follows :- (a) One no moulded case circuit breaker of suitable capacity. (b) Aluminum Bus bars suitable capacity provided with termination. (c) 03 Nos current transformers of suitable ratio.(d) One set of instrument MCB’s(e) Microprocessor protections with display and indications of electrical and mechanical parameters as per manufacturers design and specifications. |
| 40 | (D) FOUNDATION :- PCC 1:2:4 foundation for DG set of suitable size complete all as per site requirement. Note :- (a) The complete generating include Engine/alternator shall be factory assembled by manufacturer or its authorized dealer as approved for assembling of the DG set. Make of assembler shall be :- (i) M/S Bhasker Power Project. (ii). M/S green field Enterprises (iii). M/S IEC Ltd. (iv) M/S Sudhir Gensets. Model C50DT5P (v) M/S Cater Piller. (B) First filling of Engine oil and fuel etc should be arranged by contractor for complete testing as directed. Please Enable Macros to View BoQ information |