|
| 1 | M&L preparing old plastered or unplastered surfaces of walls and applying one coat of white wash on old decorated surface complete all as specified and directed. |
| 2 | M&L preparing old plastered or unplastered surfaces of walls and applying two coats of white wash on old decorated with and including complete removal of existing treatment of any layer of wall surface complete all as specified and directed by Engr-in-Charge. |
| 3 | M&L for preparing old plastered or unplastered surface of walls and applying one coat of cement based paint as required colour complete all as specified and directed. |
| 4 | M&L for preparing old plastered or unplastered surface of walls and applying two coats of cement based paint as required colour over a coat of cement base primer with and including complete removal of existing treatment of any layer of wall surface complete all as specified and directed by Engr-in-Charge. |
| 5 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces with and including complete removal of existing treatment of any layer of wall and prepariing complete all as specified and directed. |
| 6 | M&L for preparing old plastered or unplastered surfaces of ceiling and applying one coat of white wash on old decorated surface complete all as specified and directed by Engr-in-Charge. |
| 7 | M&L for preparing old plastered or unplastered surfaces of ceiling and applying two coats of white wash on old decorated surface with and including complete removal of existing trreatment of any layer of ceiling complete all as specified and directed by Engr-in-Charge. |
| 8 | M&L for preparing old plastered or unplastered surfaces of walls / ceiling and applying one coat of oil bound distemper of any colour complete all as specified and directed by Engr-in-Charge. |
| 9 | M&L for preparing old plastered or unplastered surfaces of walls/celing and applying two coats of oil bound distemper over a coat of primer of same make, colour as approved by GE with and including complete removal of existing treatment of any layer of wall complete all as specified and directed by Engr-in-Charge. |
| 10 | M&L for preparing old plastered or unplastered surfaces of walls/celing and applying two coats of plastic emulsion over a coat of primer of same make, colour as approved by GE with and including complete removal of existing treatment of any layer of wall complete all as specified and directed by Engr-in-Charge. |
| 11 | M&L for applying 2mm thick cement base wall care putty on walls including filling cracks or holes complete all as specified and directed by Engr-in-Charge. |
| 12 | M&L for applying 2mm thick expoxy wall care putty on walls including filling cracks or holes complete all as specified and directed by Engr-in-Charge. |
| 13 | Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc. from wall & ceiling surfaces complete all as specified and directed. |
| 14 | M&L rendering 15 mm thick in CM 1:4 with and including mixing of liquid WPC of approved make @ 200ml per bag of cement / manufacturer's instructions on brick/concrete wall surfaces of any description, and finishing the surfaces even and fair complete complete all as specified and directed. |
| 15 | M&L for preparing new plastered or unplastered surface of walls and applying two coats of cement based paint over a coat of cement base primer complete all as specified and directed by Engr -in-Charge.. |
| 16 | Material & Labour for preparing surfaces newly plastered or unplastered surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 17 | M&L for rendering 5mm thick in CM 1:3 as in ceiling/landing etc on concrete surface finish even and smooth without using extra cement complete all as specified and directed. |
| 18 | M&L for preparing new plastered or unplastered surfaces of ceiling and applying two coats of white wash on undecorated surface complete all as specified and directed by Engr-in-Charge. |
| 19 | M&L rendering 12 mm thick in CM 1:6 on brick/concrete/stone wall, beam & coloumn surfaces of any description, and finishing the surfaces even and smooth without using extra cement complete with complete all as specified and directed by Engr-in-Charge. |
| 20 | M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer of same make, colour as approved by GE complete all as specified and directed by Engr-in-Charge. |
| 21 | M&L for preparation of old painted steel or iron surfaces of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge. |
| 22 | M&L for preparation of old painted wooden or wood based surfaces of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge. |
| 23 | Chipping of loose/ damged/cracked/previously repaired/ delaminated or weak concrete shall be chipped to expose the sound core concrete whereever required to expose rusted reinforcement for upto required depth. |
| 24 | Supply and apply of rust remover cum passivator to remove rust from existing reinforcement. Product: Rustproof (Sika/BASF/Foscroc) Consumption: 0.2 kg/m2/coat. Density: 1.01 Kg/l at 30 degree elsiusNote: The mtrl to be applied thoroughly on exposed rebars only with the help of a brush of suitable size. The area will be measured as length and width of eposed surface the sound core concrete. |
| 25 | Supply and apply a cement based polymer modified rebar corrosion protection system to existing reinforcement. Product: cement based polymer modified rebar corrosion protection system (Sika/BASF/Foscroc) Consumption: 3.75 kg/m2 for two coats. Product requirements: carbonation resistance: 2 mm of SikaTop Armatec®-108 corresponds to 20 mm of normal mortar; bond strength > 1N/mm2 according to ASTM C 882-78.Note: The mtrl to be applied thoroughly on exposed rebars only with the help of a brush of suitable size. The area will be measured as length and width of eposed surface the sound core concrete. |
| 26 | Providing, mixing & applying two component Epoxy resin concrete Bonding coat on prepared RCC surfaces as per manufacture specification including prepartaion of surface by chipping and throughly cleaning of surface complete whereever required and as per directions of Engineer-in-charge. Product: Sikadur®-32 LP./ MasterBrace1441/Fosroc Consumption: 0.4 kg/m2. Product requirements: Complies with ASTM C 881 Type II Grade 2 Class B+C. |
| 27 | M&L for providing & applying by mixing and trowel application of prepacked, light weight, two component structural grade polymer modified reinstatement cement mortar (Renderoc S2 / Renderoc HB2 of FOSROC or equivalent in Dr Fixit/Sika/BASF as approved by GE) at an average thickness exceeding 10mm and upto 25mm to the prepared concrete surface in soffit of slabs, beam, columns, parapets, fins and facias at any height, including finishing of applied Polymer mortar as per the technical specifications and manufacturer's instructions complete all as specified and directed . |
| 28 | M&L for providing & applying by mixing and trowel application of prepacked, light weight, two component structural grade polymer modified reinstatement cement mortar (Renderoc S2 / Renderoc HB2 of FOSROC or equivalent in Dr Fixit/Sika/BASF as approved by GE) at an average thickness exceeding 25mm to the prepared concrete surface in soffit of slabs, beam, columns, parapets, fins and facias at any height, including finishing of applied Polymer mortar as per the technical specifications and manufacturer's instructions complete all as specified and directed . Please Enable Macros to View BoQ information |