|
| 1 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each etc complete all as specified and as directed |
| 2 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exe 1.5 Sqm but not exc 4 Sqm each etc complete all as specified and as directed. |
| 3 | Taking down shutters of any description n.exc 1 Sqm each etc complete all as specified and as directed |
| 4 | Taking down shutters of any description exc 1 sqm and n.exc 2 Sqm each etc complete all as specified and as directed |
| 5 | Refixing shutter of any description exc 1 Sqm but n exc 2 sqm each in same opening etc complete all as specified and as directed |
| 6 | Refixing shutter of any description exc 2 Sqm each in same opening etc complete all as specified and as directed |
| 7 | S&F solid PVC frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, S&F in opening as per specification & drawing etc complete all as specified and as directed |
| 8 | S&F factory made solid panel PVC door shutter 30mm thick (style) constiting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and palin colour PVC sheet for top rail lock rail & botom rail on either side and as gap insert for top rail bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/selaed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement S&F in the frame at site as per specification & drawing etc complete all as specified and as directed. |
| 9 | S & F in repair factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.Area not exceeding 2.00 sqm each (Note: The unit rate quoted by contractor included cost of glass and includes all other connected accessories.) etc complete all as specified and direcetd. |
| 10 | S&F in repair factory made single extruded WPC (Wood Polymer Composite) chowkhat for solid door & other Frames of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant etc.complete as per direction of Engineer-in-Charge |
| 11 | S&F in repair factory made single extruded WPC (Wood Polymer Composite) chowkhat for solid door & other Frames of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant etc.complete as per direction of Engineer-in-Charge |
| 12 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: Cost of stainless steel butt hinges and necessary S.S screws will be included in qouted rate. ) |
| 13 | S&F 30 mm thick FACTORY MADE WIRE MESH SOLID WPC both side solid decorative DOOR SHUTTER consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company,including SS mosquito Mesh and XTN aluminium Mesh with aluminum deco grill for additional strength and safety purpose. (confirming as per S:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube. Other hardwares should be fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in-charge, manufacturer's specification & drawings. complete all as specified and directed. (Note: Cost of stainless steel butt hinges and necessary S.S screws will be included in qouted rate. ) |
| 14 | M&L, aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 15 | M&L, aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |