Indian Tenders

Tender Notice
TDR 55073480
Tendering Authority Irrigation And Public Health Department
Tender No EE/JSVD/THL/2026-27-452-85 Dt. 13.04.2026
Tender ID 2026_HPIPH_134219_1
Tender Brief Tender For Rrd Of Various Lwss Under Jal Shakti Sub Division Sullah In Tehsil Pal Ur Distt. Kangra (Hp) (Sh: - supply erection Of 1.50 Hp Stages Submersible Motor Pump At Sullah (Under Crf)
City Kangra
State Himachal Pradesh
Document Fees INR 350 /-
EMD INR 2464.0 /-
Tender Value INR 1.23 Lakhs /-
Tender Type Tender
Bidding Type Open Tender
Competition Type Indian

Tender Details

Tender for Rrd Of Various Lwss Under Jal Shakti Sub Division Sullah In Tehsil Pal Ur Distt. Kangra (Hp) (Sh: - supply erection Of 1.50 Hp Stages Submersible Motor Pump At Sullah (Under Crf)

Key Dates
Publish Date 13-04-2026
Last Date of Bid Submission 24-04-2026
Tender Opening Date 24-04-2026

Contact Information
Company Name Irrigation And Public Health Department
Contact Person EE Jal Shakti Division Thural
Address EE Jal Shakti Division Thural

BOQ Items
Name of Work:- RRD of various LWSS under Jal Shakti Sub Division Sullah in Tehsil Pal ur Distt. Kangra (HP) (SH: - S/E of 1.50 HP stages submersible motor pump at Sullah (under CRF)
Sl. No. Item Description
1Dismentalling of head assembly and rejointing complete in all respect as per direction of Engineer in charge with in all leads and lifts
2Supply and errection of submersible motor of 1.50 HP of Saber/ Kirloskar/ KSB make of (single phase) confirming to ISI No.8034-1975 with upto date ammendments. The pump should be fiited with impeller confirfing to IS BIS 1962 (upto date ammendments) grade 3-4 Dynamically balanced stainless steel shaft confirming to IS 1670 (Part-v) 1972 with upto date ammendments) close grained cast irom bowls confirming to IS 210-1970 with upto date ammendments, The pump offered shall have high efficency with in the head range of (+) 10% and (-) 25% of designed head and directly coupled to a submersible quireel cage electric induction motor of KSB make suitable for operation of +10% volt cycle AC supply preferably of 2900 RPM water lubricated bearing provided with stainless steel thrust bearing plate to with stand non vertical loads with minimum bear & tear. The rating of motor should be designed in order to ensure that the pump does not get over loaded while operating Discharge 1.00 LPS Total Head -100 mtrs
3Supply and errection of control panel board 1.50 HP complete with accessories such as Ammeter, volt metre, single phase preventer, over load relay, over load system on and off switch etc. including time starter of cromption make complete in all respect as per direction of Engineer in charge with in all leads and lifts.
4Providing and fixing of iron fabricated box complete in all respect as per direction of Engineer in charge with in all leads and lifts.
5Providing and fixing of 32 mm dia socketed riser column pipe length 100 foot Raksha/ Sabar make complete in all respect as per direction of Engineer in charge with in all leads and lifts.
6Providing and fixing of 2.50 mm2 submersible copper cable 3 core (Havells/ Finolex make complete in all respect as per direction of Engineer in charge with in all leads and lifts.
7Providing and fixing of 6 mm2 steel wire complete in all respect as per direction of Engineer in charge with in all leads and lifts.
8Providing and fixing of 1.50 x 1\\" clamp complete in all respect as per direction of Engineer in charge with in all leads and lifts.
9Providing and fixing of bore cover 5\\" dia complete in all respect as per direction of Engineer in charge with in all leads and lifts.
10P/F of Adaptor assembly including errection of all equipment complete in all respect as per direction of Engineer in charge with in al leads and lifts.
11P/F of 32 mmx 32 mm socket, reducer, nipple, elbow etc. complete in all respect as per direction of Engineer in charge with in al leads and lifts.
12Transportion charges of tripod stand to remove hand pump assembly to site of work complete in all respect as per direction of Engineer in charge with in al leads and lifts.
13Re- development of bore including carriage of compressor complete testing of site as per direction of Engineer in charge with in all leads and lifts.
14Transportation of truck mounted rig/ air compresssor installation at site complete in all respect as per direction of Engineer in charge with in all leads and lifts.
15Labour charges and lowering of submersible pump in the bore well and complete testing of site as per direction of Engineer in charge with in all leads and lifts. Please Enable Macros to View BoQ information

Other Detail
Information Source https://hptenders.gov.in
Download FileName File Description File Size
Download BOQ_198479.xls Tender Documents 0 KB
Download d7e85fab-ba33-4097-80a9-5e0e1c95a2c5.html Tender Documents 0 KB
Download Form6.pdf Tender Documents 0 KB
Download Form8.pdf Tender Documents 0 KB
Download Tendernotice_1 (5).pdf Tender Documents 0 KB
Download Termsandconditions.pdf Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.