Name of Work:- Supply Installation, Testing, Commissioning (SITC) of Façade Lighting at CCR Building, Shiv Murti Near Har Ki Podi, and Sarvanand Ghat, Under Kumbh Mela 2027, Haridwar (Including 3Years Operations and Maintenance) | Sl. No. | Item Description | |
| 1 | CCR Building. | | 2 | SITC of high quality long through multi colour with RGBW 4in1 LED, DMX-RDM based wash light, Protection Rating: IP66, complying to BIS standard \\"IS 10322 (Part 5/Sec 1): 2012\\" and having CE certification against standard \\"Low Voltage Directive & Protective Equipment - EN 60598 (Part 2/Sec 1):2020\\", and \\"Electromagnetic Compatibility Directive - EN 61547:2020\\", Mounting Structure: Adjustable surface mount yoke arrangements for fixing the lights having the rotation degrees embossed in the die cast. Power consumption: 50W, CCT: RGBW (6000K -7000K) (as per the design approval), Optics: PMMA/PC Lens with separate holder, Beam Angle: 25°/45°/60°(as per the design approval), Luminous Efficacy must be Min : 55Lm/W, Body: Die casted/ extruded aluminium with embossed manufacturer logo, Separate compartment for keeping the decoder/driver in the housing which can be easily removable for service without disturbing the LEDs/Optics, Hot spot and light distribution: Optics Designed to minimize hot spots & fringing in colour mixing applications. Luminaire shall be capable of producing dynamic colour-changing light with 16.7million colours and it shall support control via DMX, Ethernet, and Remote Device Management (RDM) for enhanced configuration and management. The luminaire should offer channel options of 8/ 4 channels by using a Programming kit, with these channels providing control for effects and colour transitions like 4 colour 4 channels, Master, Jump, strobe, Macro function and speed in the rest 4 channels as per the requirement. Additionally, it shall feature auto colour synchronization functionality, allowing seamless operation if there is a loss of DMX signal/ with loop in loop out. Power Input: DC 24V External Group Driver, Surge Protection: Inbuilt surge protection in the driver 2KV-4KV (Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection: IK08 or higher, Painting: Chemical 3/7 tank processed treatment before the powder coat black/Grey/approved colour coat. Fixture will be suitable to operate in a temperature range of -10°C to +60°C, the light fixtures are having IP68 air vent made of stainless steel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmental condition. LED life should be at least 50,000 burning hours at L70 at 50 degrees centigrade LM80 to be provided. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 35-micron Copper, 2W TC with Black or White masking, Copper /OSP finish. LM79, IK08, HV & IP66 Certificates from NABL Accredited laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalent with LM80 report from as international testing Laboratory. Power & DMX Loop In/Out along with moulded connector having the length >300mm. Certifications: CE, RoHS, BIS. With antitheft locking arrangement including MS/GI Cage or as per direction of Engineer-in-charge. | | 3 | SITC of high quality long through multi colour with RGBW 4in1 LED, DMX-RDM based spot light, Protection Rating: IP66, complying to BIS standard \\"IS 10322 (Part 5/Sec 1): 2012\\" and having CE certification against standard \\"Low Voltage Directive & Protective Equipment - EN 60598 (Part 2/Sec 1):2020\\", and \\"Electromagnetic Compatibility Directive - EN 61547:2020\\", Mounting Structure: Adjustable surface mount yoke arrangements in the die cast for fixing. Power consumption: 20W, CCT: RGBW (6000K - 7000K) (as per the design approval), Optics: PMMA/PC Lens with holder, Beam Angle: 25°/45°/60°(as per the design approval), Luminous Efficacy must be Min : 55Lm/W, Body: Die casted aluminium with embossed manufacturer logo, Separate compartment for keeping the decoder/driver in the housing which can be easily removable for service without disturbing the LEDs/Optics, Hot spot and light distribution: Optics Designed to minimize hot spots & fringing in colour mixing applications. Luminaire shall be capable of producing dynamic colour-changing light with 16.7million colours and it shall support control via DMX, Ethernet, and Remote Device Management (RDM) for enhanced configuration and management. The luminaire should offer channel options of 8/ 4 channels by using a Programming kit, with these channels providing control for effects and colour transitions like 4 colour 4 channels, Master, Jump/ strobe, Micro function and speed. Additionally, it shall feature auto colour synchronization functionality, allowing seamless operation if there is a loss of DMX signal/ with loop in loop out. Power Input: DC 24V External Group Driver, Surge Protection: Inbuilt surge protection in the driver 2KV-4KV (Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection: IK07 or higher, Painting: Chemical 3/7 tank processed treatment before the powder coat black/Grey/approved colour coat. Fixture will be suitable to operate in a temperature range of -10°C to +60°C, the light fixtures are having IP68 air vent made of stainless steel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmental condition. LED life should be at least 50,000 burning hours at L70 at 50 degrees centigrade. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 35-micron Copper, 2W TC with Black or White masking, Copper /OSP finish. LM79, IK07, HV & IP66, Certificates from NABL Accredited laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalent with the engineer or 3rd party testing laboratory approval. Power & DMX Loop In/Out along with moulded connector having the length >300mm. Certifications: CE, RoHS, BIS. With antitheft locking arrangement including MS/GI Cage or as per direction of Engineer-in-charge. | | 4 | SITC of high quality Multi Color Neon Flexible light, Protection Rating : IP65, Mounting Structure : Adjustable wall mount aluminium profile for fixing the lights. Power consumption : 12W, CCT : RGB/RGBW, (as per the design approval) Beam Angle : 120º, Control : DmX512 Channel : 4 CH, Power Input : DC 24V with external driver, Surge Protection : Inbuilt surge protection 2KV-4KV(Additional if required will be added as per the requirement), Fixture will be suitable to operate in a temperature range of +10°C to -60°C , LED life time should be at least 50,000 burning hours at L70 at 25 degree centigrade. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. LED Makes should be CREE, LumilLED, Osram, Seoul, Epistar, Nichia or equivalent with the engineer or 3rd party testing laboratory approval. With antitheft locking arrangement including MS/GI Cage or as per direction of Engineer-in-charge. | | 5 | SITC of Aluminium Profile for Neon flex | | 6 | SITC of DC power driver for the above Lights, Power : 200W, Input : AC 110-240V AC, 50Hz, Output : DC 12/24V, Protection rating, IP67, Surge protection : LL 4KV, LE 6KV | | 7 | SITC of high quality DMX decoder, Power Input : DC 24V, Input Signal: DMX512, Addressing: You can manually set DMX addresses using DIP switches or digital displays, Smooth Dimming: Enables 0–100% dimming and dynamic effects like fading or color chasing. IP Rating: IP20. | | 8 | SITC of PVC insulated multi core electrical un armoured flexible 5C x 0.5Sq mm power cable having less electrical losses. | | 9 | SITC of PVC insulated multi core electrical un armoured flexible 3C x 1.5Sq mm power cable having less electrical losses. This PVC insulated and round sheathed wire features a bright multi strands copper conductors and it supports voltage grade up to 1100V. | | 10 | SITC of PVC insulated multi core electrical un armoured flexible 3C x 2.5Sq mm power cable having less electrical losses. This PVC insulated and round sheathed wire features a bright multi strands copper conductors and it supports voltage grade up to 1100V . | | 11 | SITC of 5 core DMX cable comprises twisted pairs with shield support for carrying of data. DMX512 cable is used for connecting all light consoles that use DMX 512 standard data transmission. | | 12 | SITC of PVC insulated multi core electrical armored flexible 4C x 6Sq mm power cable having less electrical losses. This PVC insulated and round sheathed wire features a bright multi strands aluminium conductors and it supports voltage grade up to 1100V. | | 13 | SITC of 63 mm outside dia. double wall corrugated pipes (DWC) for enclosing cable below ground/road surface, to required depth complete for both power and Dmx. (As per actuals depending upon the site condition) | | 14 | SITC of 5 pin XLR Male connectors having 5 pole cable connector, Male/Female connector with improved latch, cage type contacts, \\"solder stop\\" for easy soldering, and additional ground contact for best contact integrity between chassis and cable connector. More durable housing for maximum reliability. | | 15 | SITC of 5 pin XLR Female connectors having 5 pole cable connector, Male/Female connector with improved latch, cage type contacts, \\"solder stop\\" for easy soldering, and additional ground contact for best contact integrity between chassis and cable connector. More durable housing for maximum reliability. | | 16 | SITC of Main Power Distribution Board made up of MS Sheet metal fabricated housing black powder coated and ivery connectors for the internal terminations and external outgoing connecting points, fibre / brass glands of suitable size fitted MCB control for outgoing circuits. Timer with required contactor for auto switching. Power panel suitable for indoor/outdoor applicable and floor mount / wall mount options.- 2 Nos of 32A TPN MCB Outgoing MCB's.- 1No of 100A TPN Incoming MCB. | | 17 | SITC of Sub Power Distribution Board made up of MS Sheet metal fabricated housing black powder coated and ivery connectors for the internal terminations and external outgoing connecting points, fibre / brass glands of suitable size fitted MCB control for outgoing circuits. Timer with required contactor for auto switching. Power panel suitable for indoor/outdoor applicable and floor mount / wall mount options.- 12 Nos of 6/10A SP Outgoing MCB's.- 1No of 32A TPN Incoming MCB. | | 18 | SITC of IP driver box made up of PVC / UPVC and ivory connectors for the internal terminations and external outgoing connecting points, fiber / brass glands of suitable size fitted MCB control for outgoing circuits. | | 19 | SITC of DMX isolator or splitter provides Isolated optical DMX splitter provides 8 outputs from a 1 input and Input voltage: AC 110 to 220 V, 50 Hz, Product features: Group 1 & group 8 DMX signal change. | | 20 | SITC of DMX signal amplifier for improving/amplifying the input signals through longer distances. Signal regeneration: Boosts weakened DMX signals after long-distance transmission. Input Volatage: 12V/24V, IP Ratating: IP20. | | 21 | SITC of Din Rail Mount DMX controller can be used to control a wide variety of different DMX systems- from RGB/RGBW to more advanced moving and color mixing luminaires, DMX audio players and fountains. The controller comes with a variety of features, iPhone/iPad/Android remote control, Wi-Fi facilities, dry contact port triggering and flash memory. USB connection • 2048 DmX channels universe in live mode (computer) • 8 dry contact trigger ports via HE10 connector • stand alone mode with 5 area and 90+ scenes, Mac OSx 10.6/10.7/10.8 - Windows XP/VISTA/SEVEN/8 32/64 bits and USB 2.0, XLR3, mini USB, 1 HE10, Power From 5V to 5.5V DC (AC/DC adapter in option. | | 22 | SITCand fixing of PVCconduit pipeon surface25mmDia (Medium) with accessories, junction box etc. including clamping etc . | | 23 | S/L of 10-16 Sq. mm Al Ar Cable Laying . | | 24 | Providing earthing with galvanised iron earth plate, Earthing pipe, GI earthing wire, complete with all materials, testing and recording. | | 25 | Programming charges as per site conditions or client's approval (18 scenes ). | | 26 | SITC of additional accessories for installing the lights as per the final drawing/site condition consisting of clamps, brackets, angles, joints, hardware's like fasteners, nut & bolts , GI Pipe, Flexible Metalic/ PVC Pipe, Cutting, excavation, refilling with CC as directed by Engineer-in-charge, Hydra Charges, Welding charges etc. Foundation/ Grouting etc as per site requirement and direction of Engineer-in-charge. | | 27 | Shiv Murti | | 28 | SITC of high quality long through multi colour with RGBW 4in1 LED, DMX-RDM based wash light, Protection Rating: IP66, complying to BIS standard \\"IS 10322 (Part 5/Sec 1): 2012\\" and having CE certification against standard \\"Low Voltage Directive & Protective Equipment - EN 60598 (Part 2/Sec 1):2020\\", and \\"Electromagnetic Compatibility Directive - EN 61547:2020\\", Mounting Structure: Adjustable surface mount yoke arrangements for fixing the lights having the rotation degrees embossed in the die cast. Power consumption: 150W, CCT: RGBW (6000K -7000K) (as per the design approval), Optics: PMMA/PC Lens with separate holder, Beam Angle: 25°/45°/60°(as per the design approval), Luminous Efficacy must be Min : 55Lm/W, Body: Die casted/ extruded aluminium with embossed manufacturer logo, Separate compartment for keeping the decoder/driver in the housing which can be easily removable for service without disturbing the LEDs/Optics, Hot spot and light distribution: Optics Designed to minimize hot spots & fringing in colour mixing applications. Luminaire shall be capable of producing dynamic colour-changing light with 16.7million colours and it shall support control via DMX, Ethernet, and Remote Device Management (RDM) for enhanced configuration and management. The luminaire should offer channel options of 8/ 4 channels by using a Programming kit, with these channels providing control for effects and colour transitions like 4 colour 4 channels, Master, Jump, strobe, Macro function and speed in the rest 4 channels as per the requirement. Additionally, it shall feature auto colour synchronization functionality, allowing seamless operation if there is a loss of DMX signal/ with loop in loop out. Power Input: DC 24V External Group Driver, Surge Protection: Inbuilt surge protection in the driver 2KV-4KV (Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection: IK08 or higher, Painting: Chemical 3/7 tank processed treatment before the powder coat black/Grey/approved colour coat. Fixture will be suitable to operate in a temperature range of -10°C to +60°C, the light fixtures are having IP68 air vent made of stainless steel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmental condition. LED life should be at least 50,000 burning hours at L70 at 50 degrees centigrade LM80 to be provided. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 35-micron Copper, 2W TC with Black or White masking, Copper /OSP finish. LM79, IK08, HV & IP66 Certificates from NABL Accredited laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalent with LM80 report from as international testing Laboratory. Power & DMX Loop In/Out along with moulded connector having the length >300mm. Certifications: CE, RoHS, BIS. including costing of MS Cage with locking arrangements as direction by Engineer-in-charge With antitheft locking arrangement including MS/GI Cage or as per direction of Engineer-in-charge. | | 29 | SITC of GI poles for fixing the high power LED façade wash/spot lights with the height 6 Meter as per sign/Site condition along with necessary clamping arrangements. | | 30 | SITC of DC power driver for the above Lights, Power : 200W, Input : AC 110-240V AC, 50Hz, Output : DC 12/24V, Protection rating, IP67, Surge protection : LL 4KV, LE 6KV | | 31 | SITC of PVC insulated multi core electrical un armored flexible 3C x 1.5Sq mm power cable having less electrical losses. This PVC insulated and round sheathed wire features a bright multi strands copper conductors and it supports voltage grade up to 1100V. | | 32 | SITC of PVC insulated multi core electrical un armored flexible 3C x 2.5Sq mm power cable having less electrical losses. This PVC insulated and round sheathed wire features a bright multi strands copper conductors and it supports voltage grade up to 1100V. | | 33 | SITC of 5 core DMX cable comprises twisted pairs with shield support for carrying of data. DMX512 cable is used for connecting all light consoles that use DMX 512 standard data transmission. | | 34 | SITC of 5 pin XLR Male connectors having 5 pole cable connector, Male/Female connector with improved latch, cage type contacts, \\"solder stop\\" for easy soldering, and additional ground contact for best contact integrity between chassis and cable connector. More durable housing for maximum reliability. | | 35 | SITC of 5 pin XLR Female connectors having 5 pole cable connector, Male/Female connector with improved latch, cage type contacts, \\"solder stop\\" for easy soldering, and additional ground contact for best contact integrity between chassis and cable connector. More durable housing for maximum reliability. | | 36 | SITC of Power Distribution Board made up of MS Sheet metal fabricated housing black powder coated and ivery connectors for the internal terminations and external outgoing connecting points, fibre / brass glands of suitable size fitted MCB control for outgoing circuits. Timer with required contactor for auto switching. Power panel suitable for indoor/outdoor applicable and floor mount / wall mount options.- 9 Nos of 6/10A SP Outgoing MCB's. - 1No of 16A TPN Incoming MCB. | | 37 | SITC of IP driver box made up of PVC / UPVC for the internal terminations and external outgoing connecting points, with required PVC / brass glands, Optional suitable size MCB fitted for control outgoing circuits. | | 38 | SITC of DMX isolator or splitter provides Isolated optical DMX splitter provides 8 outputs from a 1 input and Input voltage: AC 110 to 220 V, 50 Hz, Product features: Group 1 & group 8 DMX signal change. | | 39 | SITC of DMX controller can be used to control a wide variety of different DMX systems- from RGB/RGBW to more advanced moving and color mixing luminaires, 128 DmX channels in live mode (computer), stand alone mode with 1 area and 20 scenes, Mac OSx 10.6/10.7/10.8 - Windows XP/VISTA/SEVEN/8 32/64 bits and USB 2.0, XLR3, mini USB, Power From 5V to 5.5V DC (AC/DC adapter in option) With External Button for Scene change/Selection scenes. | | 40 | Programming charges as per site conditions or client's approval (18 scenes ). | | 41 | SITC of additional accessories for installing the lights as per the final drawing/site condition consisting of clamps, brackets, angles, joints, hardware's like fasteners, nut & bolts , GI Pipe, Flexible Metalic/ PVC Pipe, Cutting, excavation, refilling with CC as directed by Engineer-in-charge, Hydra Charges, Welding charges etc. Foundation/ Grouting etc as per site requirement and direction of Engineer-in-charge. | | 42 | S/L of 4C X 10 SQ mm AL Armoured Cable Complete the job in all Respect. | | 43 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part Il complete with fitting and cutting, jointing etc. in the existing trench, complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal) | | 44 | S/B of Copper bonded rod with Low carbon steel, high tensile strength copp bonded rod with copper coating. Diameter- 14 mm. Length- Imeter. Material- Copper Bonded, Coating thickness- 50 microns min., Environment friendly. RoHS Certified low resistivity Carbon based Ground Enhancement material in12 Kg pack to fill the bore area around the rod & providing of suitable connector and lug including excavation and refilling as per specification with suitable size of hardpoly plastic earth pit chamber with locking arrangement . Accessories As per Site Conditions . | | 45 | Sarvanand Ghat | | 46 | SITC of high quality long through multi colour with RGBW 4in1 LED, DMX-RDM based wash light, Protection Rating: IP66, complying to BIS standard \\"IS 10322 (Part 5/Sec 1): 2012\\" and having CE certification against standard \\"Low Voltage Directive & Protective Equipment - EN 60598 (Part 2/Sec 1):2020\\", and \\"Electromagnetic Compatibility Directive - EN 61547:2020\\", Mounting Structure: Adjustable surface mount yoke arrangements for fixing the lights having the rotation degrees embossed in the die cast. Power consumption: 100W, CCT: RGBW (6000K -7000K) (as per the design approval), Optics: PMMA/PC Lens with separate holder, Beam Angle: 25°/45°/60°(as per the design approval), Luminous Efficacy must be Min : 55Lm/W, Body: Die casted/ extruded aluminium with embossed manufacturer logo, Separate compartment for keeping the decoder/driver in the housing which can be easily removable for service without disturbing the LEDs/Optics, Hot spot and light distribution: Optics Designed to minimize hot spots & fringing in colour mixing applications. Luminaire shall be capable of producing dynamic colour-changing light with 16.7million colours and it shall support control via DMX, Ethernet, and Remote Device Management (RDM) for enhanced configuration and management. The luminaire should offer channel options of 8/ 4 channels by using a Programming kit, with these channels providing control for effects and colour transitions like 4 colour 4 channels, Master, Jump, strobe, Macro function and speed in the rest 4 channels as per the requirement. Additionally, it shall feature auto colour synchronization functionality, allowing seamless operation if there is a loss of DMX signal/ with loop in loop out. Power Input: DC 24V External Group Driver, Surge Protection: Inbuilt surge protection in the driver 2KV-4KV (Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection: IK08 or higher, Painting: Chemical 3/7 tank processed treatment before the powder coat black/Grey/approved colour coat. Fixture will be suitable to operate in a temperature range of -10°C to +60°C, the light fixtures are having IP68 air vent made of stainless steel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmental condition. LED life should be at least 50,000 burning hours at L70 at 50 degrees centigrade LM80 to be provided. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 35-micron Copper, 2W TC with Black or White masking, Copper /OSP finish. LM79, IK08, HV & IP66 Certificates from NABL Accredited laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalent with LM80 report from as international testing Laboratory. Power & DMX Loop In/Out along with moulded connector having the length >300mm. Certifications: CE, RoHS, BIS. With antitheft locking arrangement including MS/GI Cage or as per direction of Engineer-in-charge. | | 47 | SITC of high quality long through Multi colour with RGBW 4in1 LED, DMX-RDM based linear wash light, Protection Rating: IP66, complying to BIS standard \\"IS 10322 (Part 5/Sec 1): 2012\\" and having CE certification against standard \\"Low Voltage Directive & Protective Equipment - EN 60598 (Part 2/Sec 1):2020\\", and \\"Electromagnetic Compatibility Directive - EN 61547:2020\\", Mounting Structure: Adjustable surface mount yoke arrangements in the die cast for fixing. Power consumption: 50W, CCT: RGBW (6000K - 7000K) (as per the design approval), Optics: PMMA/PC Lens with holder, Beam Angle: 25°/45°/60°(as per the design approval), Luminous Efficacy must be Min : 55Lm/W, Body: Die casted/ extruded aluminium with embossed manufacturer logo, Separate compartment for keeping the decoder/driver in the housing which can be easily removable for service without disturbing the LEDs/Optics, Hot spot and light distribution: Optics Designed to minimize hot spots & fringing in colour mixing applications. Luminaire shall be capable of producing dynamic colour-changing light with 16.7million colours and it shall support control via DMX, Ethernet, and Remote Device Management (RDM) for enhanced configuration and management. The luminaire should offer channel options of 8/ 4 channels by using a Programming kit, with these channels providing control for effects and colour transitions like 4 colour 4 channels, Master, Jump/ strobe, Micro function and speed. Additionally, it shall feature auto colour synchronization functionality, allowing seamless operation if there is a loss of DMX signal/ with loop in loop out. Power Input: DC 24V External Group Driver, Surge Protection: Inbuilt surge protection in the driver 2KV-4KV (Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection: IK07 or higher, Painting: Chemical 3/7 tank processed treatment before the powder coat black/Grey/approved colour coat. Fixture will be suitable to operate in a temperature range of -10°C to +60°C, the light fixtures are having IP68 air vent made of stainless steel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmental condition. LED life should be at least 50,000 burning hours at L70 at 50 degrees centigrade. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 35-micron Copper, 2W TC with Black or White masking, Copper /OSP finish. LM79, IK07, HV & IP66 Certificates from NABL Accredited laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalent with the engineer or 3rd party testing laboratory approval. Power & DMX Loop In/Out along with moulded connector having the length >300mm. Certifications: CE, RoHS, BIS. With antitheft locking arrangement including MS/GI Cage or as per direction of Engineer-in-charge. | | 48 | SITC of high quality Multi Color Neon Flexible light, Protection Rating : IP65, Mounting Structure : Adjustable wall mount aluminium profile for fixing the lights. Power consumption : 12W, CCT : RGB/RGBW, (as per the design approval) Beam Angle : 120º, Control : DmX512 Channel : 4 CH, Power Input : DC 24V with external driver, Surge Protection : Inbuilt surge protection 2KV-4KV(Additional if required will be added as per the requirement), Fixture will be suitable to operate in a temperature range of 0°C to 50°C , LED life time should be at least 50,000 burning hours at L70 at 25 degree centigrade. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. LED Makes should be CREE, LumilLED, Osram, Seoul, Epistar, Nichia or equivalent with the engineer or 3rd party testing laboratory approval. | | 49 | SITC of Aluminium Profile for Neon flex | | 50 | SITC of high quality long through multi colour with RGBW 4in1 LED, DMX-RDM based spot light, Protection Rating: IP66, complying to BIS standard \\"IS 10322 (Part 5/Sec 1): 2012\\" and having CE certification against standard \\"Low Voltage Directive & Protective Equipment - EN 60598 (Part 2/Sec 1):2020\\", and \\"Electromagnetic Compatibility Directive - EN 61547:2020\\", Mounting Structure: Adjustable surface mount yoke arrangements in the die cast for fixing. Power consumption: 12W, CCT: RGBW (6000K - 7000K) (as per the design approval), Optics: PMMA/PC Lens with holder, Beam Angle: 25°/45°/60°(as per the design approval), Luminous Efficacy must be Min : 55Lm/W, Body: Die casted aluminium with embossed manufacturer logo, Separate compartment for keeping the decoder/driver in the housing which can be easily removable for service without disturbing the LEDs/Optics, Hot spot and light distribution: Optics Designed to minimize hot spots & fringing in colour mixing applications. Luminaire shall be capable of producing dynamic colour-changing light with 16.7million colours and it shall support control via DMX, Ethernet, and Remote Device Management (RDM) for enhanced configuration and management. The luminaire should offer channel options of 8/ 4 channels by using a Programming kit, with these channels providing control for effects and colour transitions like 4 colour 4 channels, Master, Jump/ strobe, Micro function and speed. Additionally, it shall feature auto colour synchronization functionality, allowing seamless operation if there is a loss of DMX signal/ with loop in loop out. Power Input: DC 24V External Group Driver, Surge Protection: Inbuilt surge protection in the driver 2KV-4KV (Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection: IK07 or higher, Painting: Chemical 3/7 tank processed treatment before the powder coat black/Grey/approved colour coat. Fixture will be suitable to operate in a temperature range of -10°C to +60°C, the light fixtures are having IP68 air vent made of stainless steel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmental condition. LED life should be at least 50,000 burning hours at L70 at 50 degrees centigrade. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 35-micron Copper, 2W TC with Black or White masking, Copper /OSP finish. LM79, IK07, HV & IP66, Certificates from NABL Accredited laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalent with the engineer or 3rd party testing laboratory approval. Power & DMX Loop In/Out along with moulded connector having the length >300mm. Certifications: CE, RoHS, BIS. With antitheft locking arrangement including MS/GI Cage or as per direction of Engineer-in-charge. | | 51 | SITC of high quality long through multi colour with RGBW 4in1 LED, DMX-RDM based wash light, Protection Rating: IP66, complying to BIS standard \\"IS 10322 (Part 5/Sec 1): 2012\\" and having CE certification against standard \\"Low Voltage Directive & Protective Equipment - EN 60598 (Part 2/Sec 1):2020\\", and \\"Electromagnetic Compatibility Directive - EN 61547:2020\\", Mounting Structure: Adjustable surface mount yoke arrangements for fixing the lights having the rotation degrees embossed in the die cast. Power consumption: 50W, CCT: RGBW (6000K -7000K) (as per the design approval), Optics: PMMA/PC Lens with separate holder, Beam Angle: 25°/45°/60°(as per the design approval), Luminous Efficacy must be Min : 55Lm/W, Body: Die casted/ extruded aluminium with embossed manufacturer logo, Separate compartment for keeping the decoder/driver in the housing which can be easily removable for service without disturbing the LEDs/Optics, Hot spot and light distribution: Optics Designed to minimize hot spots & fringing in colour mixing applications. Luminaire shall be capable of producing dynamic colour-changing light with 16.7million colours and it shall support control via DMX, Ethernet, and Remote Device Management (RDM) for enhanced configuration and management. The luminaire should offer channel options of 8/ 4 channels by using a Programming kit, with these channels providing control for effects and colour transitions like 4 colour 4 channels, Master, Jump, strobe, Macro function and speed in the rest 4 channels as per the requirement. Additionally, it shall feature auto colour synchronization functionality, allowing seamless operation if there is a loss of DMX signal/ with loop in loop out. Power Input: DC 24V External Group Driver, Surge Protection: Inbuilt surge protection in the driver 2KV-4KV (Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection: IK08 or higher, Painting: Chemical 3/7 tank processed treatment before the powder coat black/Grey/approved colour coat. Fixture will be suitable to operate in a temperature range of -10°C to +60°C, the light fixtures are having IP68 air vent made of stainless steel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmental condition. LED life should be at least 50,000 burning hours at L70 at 50 degrees centigrade LM80 to be provided. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 35-micron Copper, 2W TC with Black or White masking, Copper /OSP finish. LM79, IK08, HV & IP66 Certificates from NABL Accredited laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalent with LM80 report from as international testing Laboratory. Power & DMX Loop In/Out along with moulded connector having the length >300mm. Certifications: CE, RoHS, BIS. With antitheft locking arrangement including MS/GI Cage or as per direction of Engineer-in-charge. | | 52 | SITC of high quality Multi Color Neon Flexible light, Protection Rating : IP65, Mounting Structure : Adjustable wall mount aluminium profile for fixing the lights. Power consumption : 12W, CCT : RGB/RGBW, (as per the design approval) Beam Angle : 120º, Control : DmX512 Channel : 4 CH, Power Input : DC 24V with external driver, Surge Protection : Inbuilt surge protection 2KV-4KV(Additional if required will be added as per the requirement), Fixture will be suitable to operate in a temperature range of 0°C to 50°C , LED life time should be at least 50,000 burning hours at L70 at 25 degree centigrade. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. LED Makes should be CREE, LumilLED, Osram, Seoul, Epistar, Nichia or equivalent with the engineer or 3rd party testing laboratory approval. With antitheft locking arrangement including MS/GI Cage or as per direction of Engineer-in-charge. | | 53 | SITC of Aluminium Profile for Neon flex | | 54 | SITC of high quality long through multi colour with RGBW 4in1 LED, DMX-RDM based wash light, Protection Rating: IP66, complying to BIS standard \\"IS 10322 (Part 5/Sec 1): 2012\\" and having CE certification against standard \\"Low Voltage Directive & Protective Equipment - EN 60598 (Part 2/Sec 1):2020\\", and \\"Electromagnetic Compatibility Directive - EN 61547:2020\\", Mounting Structure: Adjustable surface mount yoke arrangements for fixing the lights having the rotation degrees embossed in the die cast. Power consumption: 50W, CCT: RGBW (6000K -7000K) (as per the design approval), Optics: PMMA/PC Lens with separate holder, Beam Angle: 25°/45°/60°(as per the design approval), Luminous Efficacy must be Min : 55Lm/W, Body: Die casted/ extruded aluminium with embossed manufacturer logo, Separate compartment for keeping the decoder/driver in the housing which can be easily removable for service without disturbing the LEDs/Optics, Hot spot and light distribution: Optics Designed to minimize hot spots & fringing in colour mixing applications. Luminaire shall be capable of producing dynamic colour-changing light with 16.7million colours and it shall support control via DMX, Ethernet, and Remote Device Management (RDM) for enhanced configuration and management. The luminaire should offer channel options of 8/ 4 channels by using a Programming kit, with these channels providing control for effects and colour transitions like 4 colour 4 channels, Master, Jump, strobe, Macro function and speed in the rest 4 channels as per the requirement. Additionally, it shall feature auto colour synchronization functionality, allowing seamless operation if there is a loss of DMX signal/ with loop in loop out. Power Input: DC 24V External Group Driver, Surge Protection: Inbuilt surge protection in the driver 2KV-4KV (Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection: IK08 or higher, Painting: Chemical 3/7 tank processed treatment before the powder coat black/Grey/approved colour coat. Fixture will be suitable to operate in a temperature range of -10°C to +60°C, the light fixtures are having IP68 air vent made of stainless steel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmental condition. LED life should be at least 50,000 burning hours at L70 at 50 degrees centigrade LM80 to be provided. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 35-micron Copper, 2W TC with Black or White masking, Copper /OSP finish. LM79, IK08, HV & IP66 Certificates from NABL Accredited laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalent with LM80 report from as international testing Laboratory. Power & DMX Loop In/Out along with moulded connector having the length >300mm. Certifications: CE, RoHS, BIS. With antitheft locking arrangement including MS/GI Cage or as per direction of Engineer-in-charge. | | 55 | SITC of high quality Multi Color Neon Flexible light, Protection Rating : IP65, Mounting Structure : Adjustable wall mount aluminium profile for fixing the lights. Power consumption : 12W, CCT : RGB/RGBW, (as per the design approval) Beam Angle : 120º, Control : DmX512 Channel : 4 CH, Power Input : DC 24V with external driver, Surge Protection : Inbuilt surge protection 2KV-4KV(Additional if required will be added as per the requirement), Fixture will be suitable to operate in a temperature range of 0°C to 50°C , LED life time should be at least 50,000 burning hours at L70 at 25 degree centigrade. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. LED Makes should be CREE, LumilLED, Osram, Seoul, Epistar, Nichia or equivalent with the engineer or 3rd party testing laboratory approval. With antitheft locking arrangement including MS/GI Cage or as per direction of Engineer-in-charge. | | 56 | SITC of Aluminium Profile for Neon flex | | 57 | SITC of high quality long through multi colour with RGBW 4in1 LED, DMX-RDM based spot light, Protection Rating: IP66, complying to BIS standard \\"IS 10322 (Part 5/Sec 1): 2012\\" and having CE certification against standard \\"Low Voltage Directive & Protective Equipment - EN 60598 (Part 2/Sec 1):2020\\", and \\"Electromagnetic Compatibility Directive - EN 61547:2020\\", Mounting Structure: Adjustable surface mount yoke arrangements in the die cast for fixing. Power consumption: 12W, CCT: RGBW (6000K - 7000K) (as per the design approval), Optics: PMMA/PC Lens with holder, Beam Angle: 25°/45°/60°(as per the design approval), Luminous Efficacy must be Min : 55Lm/W, Body: Die casted aluminium with embossed manufacturer logo, Separate compartment for keeping the decoder/driver in the housing which can be easily removable for service without disturbing the LEDs/Optics, Hot spot and light distribution: Optics Designed to minimize hot spots & fringing in colour mixing applications. Luminaire shall be capable of producing dynamic colour-changing light with 16.7million colours and it shall support control via DMX, Ethernet, and Remote Device Management (RDM) for enhanced configuration and management. The luminaire should offer channel options of 8/ 4 channels by using a Programming kit, with these channels providing control for effects and colour transitions like 4 colour 4 channels, Master, Jump/ strobe, Micro function and speed. Additionally, it shall feature auto colour synchronization functionality, allowing seamless operation if there is a loss of DMX signal/ with loop in loop out. Power Input: DC 24V External Group Driver, Surge Protection: Inbuilt surge protection in the driver 2KV-4KV (Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection: IK07 or higher, Painting: Chemical 3/7 tank processed treatment before the powder coat black/Grey/approved colour coat. Fixture will be suitable to operate in a temperature range of -10°C to +60°C, the light fixtures are having IP68 air vent made of stainless steel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmental condition. LED life should be at least 50,000 burning hours at L70 at 50 degrees centigrade. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 35-micron Copper, 2W TC with Black or White masking, Copper /OSP finish. LM79, IK07, HV & IP66, Certificates from NABL Accredited laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalent with the engineer or 3rd party testing laboratory approval. Power & DMX Loop In/Out along with moulded connector having the length >300mm. Certifications: CE, RoHS, BIS.. With antitheft locking arrangement including MS/GI Cage or as per direction of Engineer-in-charge. | | 58 | SITC of high quality long through multi colour with RGBW 4in1 LED, DMX-RDM based wash light, Protection Rating: IP66, complying to BIS standard \\"IS 10322 (Part 5/Sec 1): 2012\\" and having CE certification against standard \\"Low Voltage Directive & Protective Equipment - EN 60598 (Part 2/Sec 1):2020\\", and \\"Electromagnetic Compatibility Directive - EN 61547:2020\\", Mounting Structure: Adjustable surface mount yoke arrangements for fixing the lights having the rotation degrees embossed in the die cast. Power consumption: 50W, CCT: RGBW (6000K -7000K) (as per the design approval), Optics: PMMA/PC Lens with separate holder, Beam Angle: 25°/45°/60°(as per the design approval), Luminous Efficacy must be Min : 55Lm/W, Body: Die casted/ extruded aluminium with embossed manufacturer logo, Separate compartment for keeping the decoder/driver in the housing which can be easily removable for service without disturbing the LEDs/Optics, Hot spot and light distribution: Optics Designed to minimize hot spots & fringing in colour mixing applications. Luminaire shall be capable of producing dynamic colour-changing light with 16.7million colours and it shall support control via DMX, Ethernet, and Remote Device Management (RDM) for enhanced configuration and management. The luminaire should offer channel options of 8/ 4 channels by using a Programming kit, with these channels providing control for effects and colour transitions like 4 colour 4 channels, Master, Jump, strobe, Macro function and speed in the rest 4 channels as per the requirement. Additionally, it shall feature auto colour synchronization functionality, allowing seamless operation if there is a loss of DMX signal/ with loop in loop out. Power Input: DC 24V External Group Driver, Surge Protection: Inbuilt surge protection in the driver 2KV-4KV (Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection: IK08 or higher, Painting: Chemical 3/7 tank processed treatment before the powder coat black/Grey/approved colour coat. Fixture will be suitable to operate in a temperature range of -10°C to +60°C, the light fixtures are having IP68 air vent made of stainless steel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmental condition. LED life should be at least 50,000 burning hours at L70 at 50 degrees centigrade LM80 to be provided. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 35-micron Copper, 2W TC with Black or White masking, Copper /OSP finish. LM79, IK08, HV & IP66 Certificates from NABL Accredited laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalent with LM80 report from as international testing Laboratory. Power & DMX Loop In/Out along withmoulded connector having the length >300mm. Certifications: CE, RoHS, BIS. With antitheft locking arrangement including MS/GI Cage or as per direction of Engineer-in-charge. | | 59 | SITC of high quality long through multi colour with RGBW 4in1 LED, DMX-RDM based wash light, Protection Rating: IP66, complying to BIS standard \\"IS 10322 (Part 5/Sec 1): 2012\\" and having CE certification against standard \\"Low Voltage Directive & Protective Equipment - EN 60598 (Part 2/Sec 1):2020\\", and \\"Electromagnetic Compatibility Directive - EN 61547:2020\\", Mounting Structure: Adjustable surface mount yoke arrangements for fixing the lights having the rotation degrees embossed in the die cast. Power consumption: 50W, CCT: RGBW (6000K -7000K) (as per the design approval), Optics: PMMA/PC Lens with separate holder, Beam Angle: 25°/45°/60°(as per the design approval), Luminous Efficacy must be Min : 55Lm/W, Body: Die casted/ extruded aluminium with embossed manufacturer logo, Separate compartment for keeping the decoder/driver in the housing which can be easily removable for service without disturbing the LEDs/Optics, Hot spot and light distribution: Optics Designed to minimize hot spots & fringing in colour mixing applications. Luminaire shall be capable of producing dynamic colour-changing light with 16.7million colours and it shall support control via DMX, Ethernet, and Remote Device Management (RDM) for enhanced configuration and management. The luminaire should offer channel options of 8/ 4 channels by using a Programming kit, with these channels providing control for effects and colour transitions like 4 colour 4 channels, Master, Jump, strobe, Macro function and speed in the rest 4 channels as per the requirement. Additionally, it shall feature auto colour synchronization functionality, allowing seamless operation if there is a loss of DMX signal/ with loop in loop out. Power Input: DC 24V External Group Driver, Surge Protection: Inbuilt surge protection in the driver 2KV-4KV (Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection: IK08 or higher, Painting: Chemical 3/7 tank processed treatment before the powder coat black/Grey/approved colour coat. Fixture will be suitable to operate in a temperature range of -10°C to +60°C, the light fixtures are having IP68 air vent made of stainless steel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmental condition. LED life should be at least 50,000 burning hours at L70 at 50 degrees centigrade LM80 to be provided. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 35-micron Copper, 2W TC with Black or White masking, Copper /OSP finish. LM79, IK08, HV & IP66 Certificates from NABL Accredited laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalent with LM80 report from as international testing Laboratory. Power & DMX Loop In/Out along with moulded connector having the length >300mm. Certifications: CE, RoHS, BIS. With antitheft locking arrangement including MS/GI Cage or as per direction of Engineer-in-charge. | | 60 | SITC of high quality Multi Color Neon Flexible light, Protection Rating : IP65, Mounting Structure : Adjustable wall mount aluminium profile for fixing the lights. Power consumption : 12W, CCT : RGB/RGBW, (as per the design approval) Beam Angle : 120º, Control : DmX512 Channel : 4 CH, Power Input : DC 24V with external driver, Surge Protection : Inbuilt surge protection 2KV-4KV(Additional if required will be added as per the requirement), Fixture will be suitable to operate in a temperature range of 0°C to 50°C , LED life time should be at least 50,000 burning hours at L70 at 25 degree centigrade. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. LED Makes should be CREE, LumilLED, Osram, Seoul, Epistar, Nichia or equivalent with the engineer or 3rd party testing laboratory approval. With antitheft locking arrangement including MS/GI Cage or as per direction of Engineer-in-charge. | | 61 | SITC of Aluminium Profile for Neon flex | | 62 | SITC of high quality long through multi colour with RGBW 4in1 LED, DMX-RDM based wash light, Protection Rating: IP66, complying to BIS standard \\"IS 10322 (Part 5/Sec 1): 2012\\" and having CE certification against standard \\"Low Voltage Directive & Protective Equipment - EN 60598 (Part 2/Sec 1):2020\\", and \\"Electromagnetic Compatibility Directive - EN 61547:2020\\", Mounting Structure: Adjustable surface mount yoke arrangements for fixing the lights having the rotation degrees embossed in the die cast. Power consumption: 50W, CCT: RGBW (6000K -7000K) (as per the design approval), Optics: PMMA/PC Lens with separate holder, Beam Angle: 25°/45°/60°(as per the design approval), Luminous Efficacy must be Min : 55Lm/W, Body: Die casted/ extruded aluminium with embossed manufacturer logo, Separate compartment for keeping the decoder/driver in the housing which can be easily removable for service without disturbing the LEDs/Optics, Hot spot and light distribution: Optics Designed to minimize hot spots & fringing in colour mixing applications. Luminaire shall be capable of producing dynamic colour-changing light with 16.7million colours and it shall support control via DMX, Ethernet, and Remote Device Management (RDM) for enhanced configuration and management. The luminaire should offer channel options of 8/ 4 channels by using a Programming kit, with these channels providing control for effects and colour transitions like 4 colour 4 channels, Master, Jump, strobe, Macro function and speed in the rest 4 channels as per the requirement. Additionally, it shall feature auto colour synchronization functionality, allowing seamless operation if there is a loss of DMX signal/ with loop in loop out. Power Input: DC 24V External Group Driver, Surge Protection: Inbuilt surge protection in the driver 2KV-4KV (Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection: IK08 or higher, Painting: Chemical 3/7 tank processed treatment before the powder coat black/Grey/approved colour coat. Fixture will be suitable to operate in a temperature range of -10°C to +60°C, the light fixtures are having IP68 air vent made of stainless steel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmental condition. LED life should be at least 50,000 burning hours at L70 at 50 degrees centigrade LM80 to be provided. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 35-micron Copper, 2W TC with Black or White masking, Copper /OSP finish. LM79, IK08, HV & IP66 Certificates from NABL Accredited laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalent with LM80 report from as international testing Laboratory. Power & DMX Loop In/Out along with moulded connector having the length >300mm. Certifications: CE, RoHS, BIS. With antitheft locking arrangement including MS/GI Cage or as per direction of Engineer-in-charge. | | 63 | SITC of high quality long through multi colour with RGBW 4in1 LED, DMX-RDM based wash light, Protection Rating: IP66, complying to BIS standard \\"IS 10322 (Part 5/Sec 1): 2012\\" and having CE certification against standard \\"Low Voltage Directive & Protective Equipment - EN 60598 (Part 2/Sec 1):2020\\", and \\"Electromagnetic Compatibility Directive - EN 61547:2020\\", Mounting Structure: Adjustable surface mount yoke arrangements for fixing the lights having the rotation degrees embossed in the die cast. Power consumption: 50W, CCT: RGBW (6000K -7000K) (as per the design approval), Optics: PMMA/PC Lens with separate holder, Beam Angle: 25°/45°/60°(as per the design approval), Luminous Efficacy must be Min : 55Lm/W, Body: Die casted/ extruded aluminium with embossed manufacturer logo, Separate compartment for keeping the decoder/driver in the housing which can be easily removable for service without disturbing the LEDs/Optics, Hot spot and light distribution: Optics Designed to minimize hot spots & fringing in colour mixing applications. Luminaire shall be capable of producing dynamic colour-changing light with 16.7million colours and it shall support control via DMX, Ethernet, and Remote Device Management (RDM) for enhanced configuration and management. The luminaire should offer channel options of 8/ 4 channels by using a Programming kit, with these channels providing control for effects and colour transitions like 4 colour 4 channels, Master, Jump, strobe, Macro function and speed in the rest 4 channels as per the requirement. Additionally, it shall feature auto colour synchronization functionality, allowing seamless operation if there is a loss of DMX signal/ with loop in loop out. Power Input: DC 24V External Group Driver, Surge Protection: Inbuilt surge protection in the driver 2KV-4KV (Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection: IK08 or higher, Painting: Chemical 3/7 tank processed treatment before the powder coat black/Grey/approved colour coat. Fixture will be suitable to operate in a temperature range of -10°C to +60°C, the light fixtures are having IP68 air vent made of stainless steel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmental condition. LED life should be at least 50,000 burning hours at L70 at 50 degrees centigrade LM80 to be provided. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 35-micron Copper, 2W TC with Black or White masking, Copper /OSP finish. LM79, IK08, HV & IP66 Certificates from NABL Accredited laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalent with LM80 report from as international testing Laboratory. Power & DMX Loop In/Out along with moulded connector having the length >300mm. Certifications: CE, RoHS, BIS. With antitheft locking arrangement including MS/GI Cage or as per direction of Engineer-in-charge. | | 64 | SITC of 9W Mono color Spike light, Protection Rating : IP66, complying to BIS standard \\"IS 10322 (Part 5/Sec 1): 2012\\" and having CE certification against standard \\"Low Voltage Directive & Protective Equipment - EN 60598- 1:2015\\", and \\"Electromagnetic Compatibility Directive - EN 61547: 2009\\", Mounting Structure : Adjustable spike arrangements for fixing the lights. Power consumption : 09W, CCT : 1800/3000/4000/6000K, (as per the design approval) Optics : PMMA with holder, Beam Angle : 15º/25º/45º/60º, Control : ON/OFF, Body : Die casted / extruded aluminium with embossed manufacturer logo, Hot spot and light distribution : Optics Designed to minimize hot spots & fringing in color mixing applications. Power Input : DC 24V with external driver, Surge Protection : Inbuilt surge protection 2KV-4KV(Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection up to IK05, Painting : Chemical 3/7 tank processed treatment before the powder coat black/ash/approved color coat. Fixture will be suitable to operate in a temperature range of 0°C to 50°C, LED life should be at least 50,000 burning hours at L70 at 25 degree centigrade. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 35 micron Copper, 2W TC with Black or White masking, Copper /OSP finish. LM79, IK05, IP66, HV Certificates from NABL Acrediated laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalent with the engineer or 3rd party testing laboratory approval. With antitheft locking arrangement including MS/GI Cage or as per direction of Engineer-in-charge. | | 65 | SITC of high quality long through multi colour with RGBW 4in1 LED, DMX-RDM based wash light, Protection Rating: IP66, complying to BIS standard \\"IS 10322 (Part 5/Sec 1): 2012\\" and having CE certification against standard \\"Low Voltage Directive & Protective Equipment - EN 60598 (Part 2/Sec 1):2020\\", and \\"Electromagnetic Compatibility Directive - EN 61547:2020\\", Mounting Structure: Adjustable surface mount yoke arrangements for fixing the lights having the rotation degrees embossed in the die cast. Power consumption: 100W, CCT: RGBW (6000K -7000K) (as per the design approval), Optics: PMMA/PC Lens with separate holder, Beam Angle: 25°/45°/60°(as per the design approval), Luminous Efficacy must be Min : 55Lm/W, Body: Die casted/ extruded aluminium with embossed manufacturer logo, Separate compartment for keeping the decoder/driver in the housing which can be easily removable for service without disturbing the LEDs/Optics, Hot spot and light distribution: Optics Designed to minimize hot spots & fringing in colour mixing applications. Luminaire shall be capable of producing dynamic colour-changing light with 16.7million colours and it shall support control via DMX, Ethernet, and Remote Device Management (RDM) for enhanced configuration and management. The luminaire should offer channel options of 8/ 4 channels by using a Programming kit, with these channels providing control for effects and colour transitions like 4 colour 4 channels, Master, Jump, strobe, Macro function and speed in the rest 4 channels as per the requirement. Additionally, it shall feature auto colour synchronization functionality, allowing seamless operation if there is a loss of DMX signal/ with loop in loop out. Power Input: DC 24V External Group Driver, Surge Protection: Inbuilt surge protection in the driver 2KV-4KV (Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection: IK08 or higher, Painting: Chemical 3/7 tank processed treatment before the powder coat black/Grey/approved colour coat. Fixture will be suitable to operate in a temperature range of -10°C to +60°C, the light fixtures are having IP68 air vent made of stainless steel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmental condition. LED life should be at least 50,000 burning hours at L70 at 50 degrees centigrade LM80 to be provided. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 35-micron Copper, 2W TC with Black or White masking, Copper /OSP finish. LM79, IK08, HV & IP66 Certificates from NABL Accredited laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalent with LM80 report from as international testing Laboratory. Power & DMX Loop In/Out along with moulded connector having the length >300mm. Certifications: CE, RoHS, BIS. With antitheft locking arrangement including MS/GI Cage or as per direction of Engineer-in-charge. | | 66 | SITC of DC power driver for the above Lights, Power : 200W, Input : AC 110-240V AC, 50Hz, Output : DC 12/24V, Protection rating, IP67, Surge protection : LL 4KV, LE 6KV | | 67 | SITC of high quality DMX decoder, Power Input : DC 24V, Input Signal: DMX512, Addressing: You can manually set DMX addresses using DIP switches or digital displays, Smooth Dimming: Enables 0–100% dimming and dynamic effects like fading or color chasing. IP Rating: IP20. | | 68 | SITC of PVC insulated multi core electrical un armored flexible 5C x 0.5Sq mm power cable having less electrical losses. | | 69 | SITC of PVC insulated multi core electrical un armored flexible 3C x 1.5Sq mm power cable having less electrical losses. This PVC insulated and round sheathed wire features a bright multi strands copper conductors and it supports voltage grade up to 1100V. | | 70 | SITC of PVC insulated multi core electrical un armored flexible 3C x 2.5Sq mm power cable having less electrical losses. This PVC insulated and round sheathed wire features a bright multi strands copper conductors and it supports voltage grade up to 1100V. ( | | 71 | SITC of PVC insulated multi core electrical armored flexible 4C x 10Sq mm power cable having less electrical losses. This PVC insulated and round sheathed wire features a bright multi strands aluminium conductors and it supports voltage grade up to 1100V. | | 72 | SITC of 5 core DMX cable comprises twisted pairs with shield support for carrying of data. DMX512 cable is used for connecting all light consoles that use DMX 512 standard data transmission . | | 73 | SITC of IP65 \\"T\\" power connectors easy and extremely precise locking system. High impact materials - long- lasting and reliable | | 74 | SITC of IP65 \\"T\\" DMX connectors having 3/5 pole cable connector, Male/Female connector with improved latch, cage type contacts, \\"solder stop\\" for easy soldering, and additional ground contact for best contact integrity between chassis and cable connector. More durable housing for maximum reliability. | | 75 | SITC of 5 pin XLR Male connectors having 5 pole cable connector, Male/Female connector with improved latch, cage type contacts, \\"solder stop\\" for easy soldering, and additional ground contact for best contact integrity between chassis and cable connector. More durable housing for maximum reliability. | | 76 | SITC of 5 pin XLR Female connectors having 5 pole cable connector, Male/Female connector with improved latch, cage type contacts, \\"solder stop\\" for easy soldering, and additional ground contact for best contact integrity between chassis and cable connector. More durable housing for maximum reliability. | | 77 | SITC of 50 mm outside dia. double wall corrugated pipes (DWC) for enclosing cable below ground/road surface, to required depth complete for both power and Dmx. (As per actuals depending upon the site condition) | | 78 | SITC and fixing of PVC conduit pipe on surface 25 mm Dia (Medium) with accessories, junction box etc. including clamping etc | | 79 | S/BofCopperbondedrodwithLowcarbonsteel,hightensilestrengthcoppbondedrodwithcoppercoating.Diameter-14mm.Length-Imeter.Material-CopperBonded,Coatingthickness-50micronsmin.,Environmentfriendly.RoHSCertified low resistivity Carbon based Ground Enhancement material in12 Kg pack to fill the bore area around the rod & providingofsuitableconnectorandlugincludingexcavationandrefillingasperspecificationwithsuitablesizeofhardpoly plastic earth pit chamber with locking arrangement . Accessories As per Site Conditions . | | 80 | SITC of Main Power Distribution Board made up of MS Sheet metal fabricated housing black powder coated and ivery connectors for the internal terminations and external outgoing connecting points, fibre / brass glands of suitable size fitted MCB control for outgoing circuits. Timer with required contactor for auto switching. Power panel suitable for indoor/outdoor applicable and floor mount / wall mount options.- 3 Nos of 32A TPN MCB Outgoing MCB's.- 1No of 100A TPN Incoming MCB. | | 81 | SITC of Sub Power Distribution Board made up of MS Sheet metal fabricated housing black powder coated and ivery connectors for the internal terminations and external outgoing connecting points, fibre / brass glands of suitable size fitted MCB control for outgoing circuits. Timer with required contactor for auto switching. Power panel suitable for indoor/outdoor applicable and floor mount / wall mount options.- 12 Nos of 6/10A SP Outgoing MCB's.- 1No of 32A TPN Incoming MCB. | | 82 | SITC of IP driver box made up of PVC / UPVC for the internal terminations and external outgoing connecting points, with required PVC / brass glands, Optional suitable size MCB fitted for control outgoing circuits. | | 83 | SITC of DMX signal amplifier for improving/amplifying the input signals through longer distances. Signal regeneration: Boosts weakened DMX signals after long-distance transmission. Input Volatage: 12V/24V, IP Ratating: IP20. | | 84 | SITC of DMX isolator or splitter provides Isolated optical DMX splitter provides 8 outputs from a 1 input and Input voltage: AC 110 to 220 V, 50 Hz, Product features: Group 1 & group 8 DMX signal change. | | 85 | SITC of Din Rail Mount DMX controller can be used to control a wide variety of different DMX systems- from RGB/RGBW to more advanced moving and color mixing luminaires, DMX audio players and fountains. The controller comes with a variety of features, iPhone/iPad/Android remote control, Wi-Fi facilities, dry contact port triggering and flash memory.USB connection • 1024 DmX channels universe in live mode (computer) • 8 dry contact trigger ports via HE10 connector • stand alone mode with 5 area and 90+ scenes, Mac OSx 10.6/10.7/10.8 - Windows XP/VISTA/SEVEN/8 32/64 bits and USB 2.0, XLR3, mini USB, 1 HE10, Power From 5V to 5.5V DC (AC/DC adapter in option. | | 86 | Programming charges as per site conditions or client's approval (18 scenes ). | | 87 | SITC of additional accessories for installing the lights as per the final drawing/site condition consisting of clamps, brackets, angles, joints, hardware's like fasteners, nut & bolts , GI Pipe, Flexible Metalic/ PVC Pipe, Cutting, excavation, refilling with CC as directed by Engineer-in-charge, Hydra Charges, Welding charges etc. Foundation/ Grouting etc as per site requirement and direction of Engineer-in-charge. | | 88 | Operation and Manitenance | | 89 | First Year O & M Charges @ 0.75% include Operation of System, DMX Programming & Control,Routine Inspection, Preventive Maintenance, Breakdown Maintenance, Safety & Compliance,Spare Parts & Inventory,Manpower. ( Detailed scope of work for all heads is attached along with the SBD) | | 90 | Second Year O & M Charges @ 1.25% include Operation of System, DMX Programming & Control,Routine Inspection, Preventive Maintenance, Breakdown Maintenance, Safety & Compliance,Spare Parts & Inventory,Manpower. ( Detailed scope of work for all heads is attached along with the SBD) | | 91 | Third Year O & M Charges @ 1.50% include Operation of System, DMX Programming & Control,Routine Inspection, Preventive Maintenance, Breakdown Maintenance, Safety & Compliance,Spare Parts & Inventory,Manpower. ( Detailed scope of work for all heads is attached along with the SBD) Please Enable Macros to View BoQ information |
|