|
| 1 | RKB make HC Pumps |
| 2 | Decoupling of pump from motor, checking for damage, minor repairs to be done at site if required and recoupling of repaired pump with motor, checking of realignment of pump and motor. |
| 3 | Manual carriage of the pump wherever required to the nearest roadside and loading into mechanical transport for carrage to workshop and back manual carrage of repaired pump from nearest roadside to the pumping station. |
| 4 | for head load distance 0 to 1 kms. |
| 5 | for head load distance 1-3 kms |
| 6 | for head load distance >3 kms |
| 7 | Repairing of pump shaft by jointing welding & turning to bearing size (upto to 5 stage) |
| 8 | Repairing of pump shaft by jointing welding & turning to bearing size (6 stage to 10 satge)) |
| 9 | Repairing of pump shaft by jointing welding & turning to bearing size (Beyond 10 stage) |
| 10 | Providing, Fabrication & fitting of new pump shaft as per size and specification. (3 Stage Pump) |
| 11 | Providing, Fabrication & fitting of new pump shaft as per size and specification. (4 Stage Pump) |
| 12 | Providing, Fabrication & fitting of new pump shaft as per size and specification. (5 Stage Pump) |
| 13 | Providing, Fabrication & fitting of new pump shaft as per size and specification. (6 Stage Pump) |
| 14 | Providing, Fabrication & fitting of new pump shaft as per size and specification. (7 Stage Pump) |
| 15 | Providing, Fabrication & fitting of new pump shaft as per size and specification. (8 Stage Pump) |
| 16 | Providing, Fabrication & fitting of new pump shaft as per size and specification. (9 Stage Pump) |
| 17 | Providing, Fabrication & fitting of new pump shaft as per size and specification. (10 Stage Pump) |
| 18 | Providing, Fabrication & fitting of new pump shaft as per size and specification. (12 Stage Pump) |
| 19 | Providing, Fabrication & fitting of new pump shaft as per size and specification. (14 Stage Pump) |
| 20 | Providing and fitting of Brass Impeller as per sample. |
| 21 | Providing and fitting of C.I Impeller as per sample. |
| 22 | Repairing of brass Impeller |
| 23 | Repairing of C.I Impeller |
| 24 | Fabrication & fitting of neck ring. |
| 25 | Fabrication & fitting of diffuser bush |
| 26 | Fabrication & fitting of Stainless steel shaft sleeves |
| 27 | Fabrication & fitting of chuck nut |
| 28 | Providing & Fitting of pump body casing |
| 29 | Repair to bearing housing by sleeve fitting & boring for bearing size |
| 30 | Providing & fitting of bearing housing along with side cover plate |
| 31 | Providing and fitting of Delivery Body |
| 32 | Providing and fitting of Suction Body |
| 33 | Providing & fitting of diffuser |
| 34 | Providing & Fitting of Oil seal |
| 35 | Replacement of ball thrust bearing-7307 |
| 36 | Replacement of ball thrust bearing-7308 |
| 37 | Replacement of ball thrust bearing-7309 |
| 38 | Replacement of Roller bearing-N-307 |
| 39 | Replacement of Roller bearing-N-308 |
| 40 | Replacement of Roller bearing-N-309 |
| 41 | Providing & Fitting Coupling bolts nuts & rubber bushes. |
| 42 | Providing & fitting of gland plates along with studs. |
| 43 | Fabrication & fitting of tie rod bolts. |
| 44 | Dismantling & fitting of Pump ( 3 stage to 5 stage) |
| 45 | Dismantling & fitting of Pump ( 6 stage to 10 stage) |
| 46 | Dismantling & fitting of Pump ( Beyond 10 stage) |
| 47 | Providing and fitting of heavy duty coupling pulley set ( 5 inch dia.) |
| 48 | Providing and fitting of heavy duty coupling pulley set ( 6 inch dia.) |
| 49 | Providing and fitting of heavy duty coupling pulley set ( 7 inch dia.) |
| 50 | Providing and fitting of heavy duty coupling pulley set ( 8 inch dia.) |
| 51 | FNC Make HC Pumps |
| 52 | Decoupling of pump from motor, checking for damage, minor repairs to be done at site if required and recoupling of repaired pump with motor, checking of realignment of pump and motor. |
| 53 | Manual carriage of the pump wherever required to the nearest roadside and loading into mechanical transport for carrage to workshop and back manual carrage of repaired pump from nearest roadside to the pumping station. |
| 54 | for head load distance 0 to 1 kms. |
| 55 | for head load distance 1-3 kms |
| 56 | for head load distance >3 kms |
| 57 | Repairing of pump shaft by jointing welding & turning to bearing size (upto to 5 stage) |
| 58 | Repairing of pump shaft by jointing welding & turning to bearing size (6 stage to 10 stage) |
| 59 | Repairing of pump shaft by jointing welding & turning to bearing size (beyond 10 stage) |
| 60 | Fabrication & fitting of new pump shaft as per size and specification (3 Stage) |
| 61 | Fabrication & fitting of new pump shaft as per size and specification (4 Stage) |
| 62 | Fabrication & fitting of new pump shaft as per size and specification (5 Stage) |
| 63 | Fabrication & fitting of new pump shaft as per size and specification (6 Stage) |
| 64 | Fabrication & fitting of new pump shaft as per size and specification (7 Stage) |
| 65 | Fabrication & fitting of new pump shaft as per size and specification (8 Stage) |
| 66 | Fabrication & fitting of new pump shaft as per size and specification (9 Stage) |
| 67 | Fabrication & fitting of new pump shaft as per size and specification (10 Stage) |
| 68 | Fabrication & fitting of new pump shaft as per size and specification (12 Stage) |
| 69 | Fabrication & fitting of new pump shaft as per size and specification (14 Stage) |
| 70 | Providing and fitting of Brass Impeller as per sample. |
| 71 | Providing and fitting of C.I Impeller as per sample. |
| 72 | Repairing of brass Impeller. |
| 73 | Repairing of C.I Impeller. |
| 74 | Fabrication & fitting of neck ring. |
| 75 | Fabrication & fitting of body bushes. |
| 76 | Fabrication & fitting of Stainless steel shaft sleeves. |
| 77 | Fabrication & fitting of chuck nut |
| 78 | Providing & Fitting of pump body casing. |
| 79 | Repair to bearing housing by sleeve fitting & boring for bearing size |
| 80 | Fabrication & fitting of bearing housing along with side cover plates |
| 81 | Providing and fitting of Delivery Body |
| 82 | Providing and fitting of Suction Body |
| 83 | Replacement of Roller bearing-N-204 |
| 84 | Replacement of Roller bearing-N-205 |
| 85 | Providing and fitting of diffuser. |
| 86 | Providing and fitting of thrust plate. |
| 87 | Providing & Fitting of Oil seal |
| 88 | Fabrication & fitting of gland plate with studs. |
| 89 | Providing & Fitting Coupling bolts nuts & rubber bushes. |
| 90 | Fabrication & fitting of tie rod bolts. |
| 91 | Providing & Fitting of stuffing box. |
| 92 | Dismantling & fitting of Pump (3 stage to 5 stage) |
| 93 | Dismantling & fitting of Pump (6 stage to 10 stage) |
| 94 | Dismantling & fitting of Pump (Beyond 10 stage) |
| 95 | Providing and fitting of heavy duty coupling pulley set ( 5 inch dia.) |
| 96 | Providing and fitting of heavy duty coupling pulley set ( 6 inch dia.) |
| 97 | Providing and fitting of heavy duty coupling pulley set ( 7 inch dia.) |
| 98 | Providing and fitting of heavy duty coupling pulley set ( 8 inch dia.) |
| 99 | KSB Make HC Pumps |
| 100 | Decoupling of pump from motor, checking for damage, minor repairs to be done at site if required and recoupling of repaired pump with motor, checking of realignment of pump and motor. |
| 101 | Manual carriage of the pump wherever required to the nearest roadside and loading into mechanical transport for carrage to workshop and back manual carrage of repaired pump from nearest roadside to the pumping station. |
| 102 | for head load distance 0 to 1 kms. |
| 103 | for head load distance 1-3 kms |
| 104 | for head load distance >3 kms |
| 105 | Repairing of pump shaft by jointing welding & turning to bearing size (upto to 5 stage) |
| 106 | Repairing of pump shaft by jointing welding & turning to bearing size (6 stage to 10 stage) |
| 107 | Repairing of pump shaft by jointing welding & turning to bearing size (beyond 10 stage) |
| 108 | Fabrication & fitting of new pump shaft as per size and specification. ( 3 stage pump) |
| 109 | Fabrication & fitting of new pump shaft as per size and specification. ( 4 stage pump) |
| 110 | Fabrication & fitting of new pump shaft as per size and specification. ( 5 stage pump) |
| 111 | Fabrication & fitting of new pump shaft as per size and specification. ( 6 stage pump) |
| 112 | Fabrication & fitting of new pump shaft as per size and specification. ( 7 stage pump) |
| 113 | Fabrication & fitting of new pump shaft as per size and specification. ( 8 stage pump) |
| 114 | Fabrication & fitting of new pump shaft as per size and specification. ( 9 stage pump) |
| 115 | Fabrication & fitting of new pump shaft as per size and specification. ( 10 stage pump) |
| 116 | Fabrication & fitting of new pump shaft as per size and specification. ( 12 stage pump) |
| 117 | Fabrication & fitting of new pump shaft as per size and specification. ( 14 stage pump) |
| 118 | Providing and fitting of Brass Impeller as per sample |
| 119 | Providing and fitting of C.I Impeller as per sample |
| 120 | Repairing of brass Impeller. |
| 121 | Repairing of C.I Impeller. |
| 122 | Fabrication & fitting of neck ring. |
| 123 | Fabrication & fitting of spacer bushes. |
| 124 | Fabrication & fitting of Stainless steel shaft sleeves |
| 125 | Fabrication & fitting of chuck nut |
| 126 | Providing & Fitting of pump body casing |
| 127 | Repair to bearing housing by sleeve fitting & boring for bearing size |
| 128 | Providing & fitting of bearing housing along with side cover plates |
| 129 | Providing and fitting of Delivery Body |
| 130 | Providing and fitting of Suction Body |
| 131 | Replacement of bearing 208 K with sleeve H 308. |
| 132 | Replacement of bearing 307 with sleeve H 307. |
| 133 | Replacement of ball thrust bearing 6403 |
| 134 | Replacement of ball thrust bearing 6404 |
| 135 | Replacement of ball thrust bearing 6405 |
| 136 | Replacement of ball thrust bearing 6406 |
| 137 | Providing and fitting of diffuser. |
| 138 | Fabrication & fitting of thrust plate |
| 139 | Providing & Fitting of Oil seal |
| 140 | Providing & Fitting Coupling bolts nuts & rubber bushes. |
| 141 | Fabrication & fitting of gland plate with studs. |
| 142 | Providing & fitting of stuffing box |
| 143 | Providing & fitting of tie rod bolts. |
| 144 | Dismantling & fitting of Pump (3 stage to 5 stage) |
| 145 | Dismantling & fitting of Pump (6 stage to 10 stage) |
| 146 | Dismantling & fitting of Pump (Beyond 10 stage) |
| 147 | Providing and fitting of heavy duty coupling pulley set ( 5 inch dia.) |
| 148 | Providing and fitting of heavy duty coupling pulley set ( 6 inch dia.) |
| 149 | Providing and fitting of heavy duty coupling pulley set ( 7 inch dia.) |
| 150 | Providing and fitting of heavy duty coupling pulley set ( 8 inch dia.) |
| 151 | Mather Platt make HC Pumps |
| 152 | Decoupling of pump from motor, checking for damage, minor repairs to be done at site if required and recoupling of repaired pump with motor, checking of realignment of pump and motor. |
| 153 | Manual carriage of the pump wherever required to the nearest roadside and loading into mechanical transport for carrage to workshop and back manual carrage of repaired pump from nearest roadside to the pumping station. |
| 154 | for head load distance 0 to 1 kms. |
| 155 | for head load distance 1-3 kms |
| 156 | for head load distance >3 kms |
| 157 | Repairing of pump shaft by jointing welding & turning to bearing size (upto to 5 stage) |
| 158 | Repairing of pump shaft by jointing welding & turning to bearing size (6 stage to 10 stage) |
| 159 | Repairing of pump shaft by jointing welding & turning to bearing size (beyond 10 stage) |
| 160 | Fabrication & fitting of new pump shaft as per size and specification. ( 3 stage pump) |
| 161 | Fabrication & fitting of new pump shaft as per size and specification. ( 4 stage pump) |
| 162 | Fabrication & fitting of new pump shaft as per size and specification. ( 5 stage pump) |
| 163 | Fabrication & fitting of new pump shaft as per size and specification. ( 6 stage pump) |
| 164 | Fabrication & fitting of new pump shaft as per size and specification. ( 7 stage pump) |
| 165 | Fabrication & fitting of new pump shaft as per size and specification. ( 8 stage pump) |
| 166 | Fabrication & fitting of new pump shaft as per size and specification. ( 9 stage pump) |
| 167 | Fabrication & fitting of new pump shaft as per size and specification. ( 10 stage pump) |
| 168 | Fabrication & fitting of new pump shaft as per size and specification. ( 11 stage pump) |
| 169 | Fabrication & fitting of new pump shaft as per size and specification. ( 12 stage pump) |
| 170 | Fabrication & fitting of new pump shaft as per size and specification. ( 14 stage pump) |
| 171 | Providing and fitting of Brass Impeller as per sample |
| 172 | Providing and fitting of C.I Impeller as per sample |
| 173 | Repairing of brass Impeller. |
| 174 | Repairing of C.I Impeller. |
| 175 | Fabrication & fitting of neck ring. |
| 176 | Fabrication & fitting of spacer bushes. |
| 177 | Fabrication & fitting of Stainless steel shaft sleeves. |
| 178 | Fabrication & fitting of chuck nut |
| 179 | Providing & Fitting of pump body casing |
| 180 | Repair to bearing housing by sleeve fitting & boring for bearing size |
| 181 | Providing & fitting of bearing housing along with side cover plates |
| 182 | Providing & fitting of brass bush |
| 183 | Providing and fitting of Delivery Body |
| 184 | Providing and fitting of Suction Body |
| 185 | Replacement of bearing 306 Nu. |
| 186 | Replacement of bearing 307 Nu. |
| 187 | Replacement of bearing 6306. |
| 188 | Providing and fitting of diffuser. |
| 189 | Fabrication & fitting of thrust plate |
| 190 | Providing & Fitting of Oil seal |
| 191 | Fabrication & fitting of gland plate with studs. |
| 192 | Providing & fitting of stuffing box |
| 193 | Providing & fitting of tie rod bolts. |
| 194 | Providing & Fitting Coupling bolts nuts & rubber bushes. |
| 195 | Dismantling & fitting of Pump (3 stage to 5 stage) |
| 196 | Dismantling & fitting of Pump (6 stage to 10 stage) |
| 197 | Dismantling & fitting of Pump (Beyond 10 stage) |
| 198 | Providing and fitting of heavy duty coupling pulley set ( 5 inch dia.) |
| 199 | Providing and fitting of heavy duty coupling pulley set ( 6 inch dia.) |
| 200 | Providing and fitting of heavy duty coupling pulley set ( 7 inch dia.) |
| 201 | Providing and fitting of heavy duty coupling pulley set ( 8 inch dia.) |
| 202 | Low Speed HC Pumps |
| 203 | Decoupling of pump from motor, checking for damage, minor repairs to be done at site if required and recoupling of repaired pump with motor, checking of realignment of pump and motor. |
| 204 | Manual carriage of the pump wherever required to the nearest roadside and loading into mechanical transport for carrage to workshop and back manual carrage of repaired pump from nearest roadside to the pumping station. |
| 205 | for head load distance 0 to 1 kms. |
| 206 | for head load distance 1-3 kms |
| 207 | for head load distance >3 kms |
| 208 | Repairing of pump shaft by jointing welding & turning to bearing size (upto to 5 stage) |
| 209 | Repairing of pump shaft by jointing welding & turning to bearing size (6 stage to 10 stage) |
| 210 | Repairing of pump shaft by jointing welding & turning to bearing size (beyond 10 stage) |
| 211 | Fabrication & fitting of new pump shaft as per size and specification. ( 3 stage pump) |
| 212 | Fabrication & fitting of new pump shaft as per size and specification. ( 4 stage pump) |
| 213 | Fabrication & fitting of new pump shaft as per size and specification. ( 5 stage pump) |
| 214 | Fabrication & fitting of new pump shaft as per size and specification. ( 6 stage pump) |
| 215 | Fabrication & fitting of new pump shaft as per size and specification. ( 7 stage pump) |
| 216 | Fabrication & fitting of new pump shaft as per size and specification. ( 8 stage pump) |
| 217 | Fabrication & fitting of new pump shaft as per size and specification. ( 9 stage pump) |
| 218 | Fabrication & fitting of new pump shaft as per size and specification. ( 10 stage pump) |
| 219 | Fabrication & fitting of new pump shaft as per size and specification. ( 11 stage pump) |
| 220 | Fabrication & fitting of new pump shaft as per size and specification. ( 12 stage pump) |
| 221 | Fabrication & fitting of new pump shaft as per size and specification. ( 14 stage pump) |
| 222 | Providing and fitting of C.I Impeller as per sample |
| 223 | Repairing of C.I Impeller. |
| 224 | Fabrication & fitting of neck ring. |
| 225 | Fabrication & fitting of spacer bushes. |
| 226 | Fabrication & fitting of guide bush |
| 227 | Fabrication & fitting of chuck nut |
| 228 | Providing & Fitting of pump body casing |
| 229 | Repair to bearing housing by sleeve fitting & boring for bearing size |
| 230 | Providing & fitting of bearing housing along with side cover plates |
| 231 | Providing and fitting of Delivery Body |
| 232 | Providing and fitting of Suction Body |
| 233 | Replacement of bearing Nu 208 K (Sleeve) |
| 234 | Replacement of bearing 6408. |
| 235 | Replacement of bearing 6306. |
| 236 | Providing and fitting of diffuser. |
| 237 | Fabrication & fitting of thrust plate |
| 238 | Providing & Fitting of Oil seal |
| 239 | Fabrication & fitting of gland plate with studs. |
| 240 | Providing & fitting of stuffing box |
| 241 | Providing & fitting of tie rod bolts. |
| 242 | Providing & Fitting Coupling bolts nuts & rubber bushes. |
| 243 | Dismantling & fitting of Pump (3 stage to 5 stage) |
| 244 | Dismantling & fitting of Pump (6 stage to 10 stage) |
| 245 | Dismantling & fitting of Pump (Beyond 10 stage) |
| 246 | Providing and fitting of heavy duty coupling pulley set ( 5 inch dia.) |
| 247 | Providing and fitting of heavy duty coupling pulley set ( 6 inch dia.) |
| 248 | Providing and fitting of heavy duty coupling pulley set ( 7 inch dia.) |
| 249 | Providing and fitting of heavy duty coupling pulley set ( 8 inch dia.) |
| 250 | Providing of Adaptor for V-6 Submersible motor |
| 251 | Providing of Adaptor for V-8 Submersible motor |
| 252 | Fabrication & providing of MS Clamp 3\\" |
| 253 | Fabrication & providing of MS Clamp 4\\" |
| 254 | Fabrication & providing of MS Shling for Gantry Post |
| 255 | Fabrication & providing of 80 mm dia. flanged adaptor with threading at other side |
| 256 | Fabrication & providing of 65 mm dia. flanged adaptor with threading at other side |
| 257 | Fabrication & providing of 125 mm dia. flanged adaptor with threading at other side |
| 258 | Fabrication & providing of 150 mm dia. flanged adaptor with threading at other side |
| 259 | Fabrication & providing of 100 mm dia. flanged adaptor with threading at other side |
| 260 | Fabrication & providing of 50 mm dia. flanged adaptor with threading at other side |
| 261 | Repairing of Submersible Pump (V-4) |
| 262 | Fabrication/Providing of Coupling pulley with cotter for V-4 Submersible motor |
| 263 | Repairing of pump shaft by welding, turning, polishing and making key ways. |
| 264 | Fabrication of pump shaft as per specification. |
| 265 | Fabrication/Providing of New Impeller |
| 266 | Fabrication/Providing of New PVC A-Grade Impeller with body set |
| 267 | Repair to impeller |
| 268 | Fabrication/Providing of Neck Ring |
| 269 | Fabrication/Providing of Body Bushes |
| 270 | Fabrication/Providing of Guide Bush |
| 271 | Fabrication/Providing of Spacer Bush |
| 272 | Fabrication/Providing of Cotter |
| 273 | Providing and fitting of body cover as per specification |
| 274 | Fabrication/Providing of Pump Body |
| 275 | Fabrication/Providing of Suction Body |
| 276 | fabrication & fitting of suction body bushes. |
| 277 | Labour Charges for dismantling and fitting of pump |
| 278 | Repairing of Submersible Pump (V-8) |
| 279 | Providing of Coupling pulley with cotter for V-8 Submersible motor |
| 280 | Repairing of pump shaft by welding, turning, polishing and making key ways. |
| 281 | Fabrication of pump shaft as per specification. |
| 282 | Fabrication of Neck Ring |
| 283 | Fabrication/Providing of New Impeller |
| 284 | Repair to impeller |
| 285 | Fabrication of Body Bushes |
| 286 | Fabrication of Guide Bush |
| 287 | Fabrication of Spacer Bush |
| 288 | Providing of Cotter |
| 289 | Fabrication of Pump Body |
| 290 | Providing of Suction Body |
| 291 | Providing of NRV with adaptor |
| 292 | Labour Charges for dismantling and fitting of pump |
| 293 | Repairing of Submersible Pump (V-6) |
| 294 | Providing of Coupling pulley with cotter for V-6 Submersible motor |
| 295 | Repairing of pump shaft by welding, turning, polishing and making key ways. |
| 296 | Fabrication of pump shaft as per specification (upto 5 stage) |
| 297 | Fabrication of pump shaft as per specification (6 stage to 10 stage) |
| 298 | Fabrication of pump shaft as per specification (11 stage to 15 stage) |
| 299 | Fabrication of pump shaft as per specification (16 stage to 20 stage) |
| 300 | Fabrication of pump shaft as per specification (beyond 20 stage) |
| 301 | Fabrication/Providing of New Impeller |
| 302 | Fabrication/Providing of New PVC A-Grade Impeller |
| 303 | Repair to impeller |
| 304 | Fabrication/Providing of Neck Ring |
| 305 | Fabrication/Providing of Body Bushes |
| 306 | Fabrication/Providing of Guide Bush |
| 307 | Fabrication/Providing of Spacer Bush |
| 308 | Fabrication/Providing of Cotter |
| 309 | Fabrication/Providing of Pump Body |
| 310 | Fabrication/Providing of Suction Body |
| 311 | Providing & fitting of suction body bush. |
| 312 | Labour charges for Dismantling & fitting of Pump (upto 5 stage) |
| 313 | Labour charges fo Dismantling & fitting of Pump (6 stage to 10 stage) |
| 314 | Labour charges fo Dismantling & fitting of Pump (11 stage to 15 stage) |
| 315 | Labour charges fo Dismantling & fitting of Pump (Beyond 15 stage) |
| 316 | Providing and fitting of copper Submersible cable 3core along with Thimbles. |
| 317 | 2.5 sq. mm /mtr. |
| 318 | 4 sq. mm /mtr. |
| 319 | 6 sq. mm /mtr. |
| 320 | 10 sq. mm/mtr. |
| 321 | 16 sq. mm/mtr. |
| 322 | Mono Submersible pumps |
| 323 | Fabrication / fitting of neck ring. |
| 324 | Providing & fitting of New Impeller of brass. |
| 325 | Providing & fitting of New Impeller of C. I |
| 326 | Repair of the exisitng impeller of brass |
| 327 | Repair of the exisitng impeller of C.I |
| 328 | Providing and fitting of body casing. |
| 329 | Providing and fitting of pump cover NDE. |
| 330 | Booster & Submersible motors |
| 331 | Repairs to V-6 submersible motor by rotor shaft turning & polishing, Fabrication & fitting of bushes in bush housing-2set. P/F of thrust pad 01 set. P/F of Stud with nuts in place of damaged studs as per requirement, Circlip lock-2nos, Fitting of motor &coupled with pump & testing in the test pit. |
| 332 | Repairs to V-6 submersible motor by rotor shaft turning & polishing, Fabrication & fitting of bushes in bush housing-2set. Repairs to thrust pad 01 set. P/F of Stud with nuts in place of damaged studs as per requirement, Circlip lock-2nos, Fitting of motor &coupled with pump & testing in the test pit. |
| 333 | Repairs to V-8 submersible motor by rotor shaft turning & polishing, Fabrication & fitting of bushes in bush housing-2set. P/F of thrust pad 01 set. P/F of Stud with nuts in place of damaged studs as per requirement, Circlip lock-2nos, Fitting of motor &coupled with pump & testing in the test pit. |
| 334 | Repairs to submersible motor (V-8) by rotor shaft turning & polishing, Fabrication & fitting of bushes in bush housing-2set. Repairs to thrust pad 01 set. P/F of Stud with nuts in place of damaged studs as per requirement, Circlip lock-2nos, Fitting of motor &coupled with pump & testing in the test pit. |
| 335 | Repair to submersible Motor (V-6) by extraction of broken copper strips from rotor than P/F of new copper strips (01 No.)& welding of the rotor, turning & finishing. Also repair to rotor end by rebuilding, turning & finishing. |
| 336 | Repair to submersible Motor (V-8) by extraction of broken copper strips from rotor than P/F of new copper strips (01 No.)& welding of the rotor, turning & finishing. Also repair to rotor end by rebuilding, turning & finishing. |
| 337 | Repairs to V-6 submersible motor by rotor shaft turning & polishing, Fabrication & fitting of bushes in bush housing-2set.Fitting of motor &coupled with pump & testing in the test pit. |
| 338 | Repairs to V-8 submersible motor by rotor shaft turning & polishing, Fabrication & fitting of bushes in bush housing-2set.Fitting of motor &coupled with pump & testing in the test pit. |
| 339 | Repairs to V-6 submersible motor by way of P/F of thrust pad 01 set. P/F of Stud with nuts in place of damaged studs as per requirement, Circlip lock-2nos, Fitting of motor &coupled with pump & testing in the test pit. |
| 340 | Repairs to V-8 submersible motor by way of P/F of thrust pad 01 set. P/F of Stud with nuts in place of damaged studs as per requirement, Circlip lock-2nos, Fitting of motor &coupled with pump & testing in the test pit. |
| 341 | Repair 25 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers & then assembling of motor. |
| 342 | Repair 25 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers with replacement of bearing at DE and NDE & then assembling of motor. |
| 343 | Repair 25 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers with replacement of bearing at one end & then assembling of motor. |
| 344 | Repair 40 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers with replacement of bearing at one end & then assembling of motor. |
| 345 | Repair 40 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers & then assembling of motor. |
| 346 | Repair 40 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers with replacement of bearing at DE and NDE & then assembling of motor. |
| 347 | Repair 50 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers & then assembling of motor. |
| 348 | Repair 50 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers with replacement of bearing at DE and NDE & then assembling of motor. |
| 349 | Repair 50 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers with replacement of bearing at one end & then assembling of motor. |
| 350 | Repair 60 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers with replacement of bearing at one end & then assembling of motor. |
| 351 | Repair 60 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers & then assembling of motor. |
| 352 | Repair 60 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers with replacement of bearing at DE and NDE & then assembling of motor. |
| 353 | Repair 100 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers & then assembling of motor. |
| 354 | Repair 70 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers & then assembling of motor. |
| 355 | Repair 100 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers with replacement of bearing at DE and NDE & then assembling of motor. |
| 356 | Repair 100 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers with replacement of bearing at one end & then assembling of motor. |
| 357 | Repair to 25 HP motor by way of replacement of bearing at one end and assembling of motor. |
| 358 | Repair to 40 HP motor by way of replacement of bearing at one end and assembling of motor. |
| 359 | Repair to 50 HP motor by way of replacement of bearing at one end and assembling of motor. |
| 360 | Repair to 60 HP motor by way of replacement of bearing at one end and assembling of motor. |
| 361 | Repair to 100 HP motor by way of replacement of bearing at one end and assembling of motor. |
| 362 | Repair to 25 HP motor by way of replacement of bearing at DE & NDE and assembling of motor. |
| 363 | Repair to 40 HP motor by way of replacement of bearing at DE & NDE and assembling of motor. |
| 364 | Repair to 50 HP motor by way of replacement of bearing at DE & NDE and assembling of motor. |
| 365 | Repair to 60 HP motor by way of replacement of bearing at DE & NDE and assembling of motor. |
| 366 | Repair to 100 HP motor by way of replacement of bearing at DE & NDE and assembling of motor. |
| 367 | Repair 75 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers & then assembling of motor. |
| 368 | Repair 75 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers with replacement of bearing at DE and NDE & then assembling of motor. |
| 369 | Repair 75 HP Induction Motor by way of rotor shaft welding and turning and sleeve to end covers with replacement of bearing at one end & then assembling of motor. |
| 370 | Repair to 75 HP motor by way of replacement of bearing at DE & NDE and assembling of motor. |
| 371 | Repair to 75 HP motor by way of replacement of bearing at one end and assembling of motor. |
| 372 | Repair 2 HP Motor of monosubmersible pump by way of rotor shaft welding and turning and sleeve to end covers & then assembling of motor. |
| 373 | Repair 3 HP Motor of monosubmersible pump by way of rotor shaft welding and turning and sleeve to end covers & then assembling of motor. |
| 374 | Repair 5 HP Motor of monosubmersible pump by way of rotor shaft welding and turning and sleeve to end covers & then assembling of motor. |
| 375 | Repair 7 HP Motor of monosubmersible pump by way of rotor shaft welding and turning and sleeve to end covers & then assembling of motor. |
| 376 | Repair 8 HP Motor of monosubmersible pump by way of rotor shaft welding and turning and sleeve to end covers & then assembling of motor. |
| 377 | Repair 10 HP Motor of monosubmersible pump by way of rotor shaft welding and turning and sleeve to end covers & then assembling of motor. |
| 378 | Flanging of 50 mm Column pipe (Single side) |
| 379 | Flanging of 65 mm Column pipe (Single side) |
| 380 | Flanging of 80 mm Column pipe (Single side) |
| 381 | Flanging of 100 mm Column pipe (Single side) |
| 382 | Flanging of 150 mm Column pipe (Single side) Please Enable Macros to View BoQ information |