|
| 1 | Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc completed all as specified & directed. |
| 2 | M & L brick work with sub class fly ash bricks straight or curved on plan exc 6 m mean radis built in CM 1:6 completed all as specified & directed. |
| 3 | M&L Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 except bricks completed all as specified & directed. |
| 4 | M&L brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 etc completed all as specified & directed. |
| 5 | Demolition of cement concrete of ground floor & paving not exceeding 15 cm in depth in any position nototherwise specifically provided for. |
| 6 | Excavating in trenches, n exc 1.5 m wide and exc 1.5 m and n. exc. 3m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc 10 sq m on plan and getting out complete in soft / loose soil for demolition of existing sewage pipe and laying of new pipe line. completed all as specified & directed. |
| 7 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. in soft / loose soil completed all as specified & directed. |
| 8 | Demolition and breaking up of drain pipe salt glazed stoneware of 150mm bore set in cement mortar complete all as specified and directed. |
| 9 | M & L 150mm dia Salt-glazed stoneware drain pipes laid in trenches and jointed completed all as specified & directed. |
| 10 | M & L Concrete bed in 1:4:8 type D-2 (using 40mm corshed stone aggregate) to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested; in for 150mm dia pipe completed all as specified & directed. |
| 11 | M & L PCC (1:2:4) Type B-1 using (20mm graded stone aggregate) as in slabs/precast cover slabs for man holesset in cement mortar 1:6 including necessary form work, placing in desired placing and including demolition and breaking of old cover slabs complete all as specified and directed. |
| 12 | M & L Mild steel TMT bars 8 to 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips completed all as specified & directed. |
| 13 | Removing excavated materials n exc 50 mtrs and deposited where directed at a level n exc 50 mtr where directed n exc 1.50 m above the starting point complete all as specified and directed. |
| 14 | M&L 75 mm thick cement concrete 1:3:6 type C-2 using (40 mm graded stone agg) as in sub base completed all as specified & directed. |
| 15 | M&L coloured Chequered cement concrete tiles 30cm x 30cm x 20mm thick, set, jointed and pointed in neat cement slurry in floors With Grey Cement and no pigment laid over including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 16 | Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each completed all as specified & directed. |
| 17 | Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.50 Sqm & n exc 4 Sqm each completed all as specified & directed. |
| 18 | S & F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45x85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 19 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and avg width of aperture 1.40mm fixed with tinned tacks or stainless steel wire staple complete all as specified and directed. |
| 20 | S&F Box type steel window/Ventilator comprised of tubular frame and shutters made out of 1.25mm thick MS Sheet tube with double side shutters wire gauged shutter & glass glazed shutter with side hung shutters with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 150mm long for each leaf and 10mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks etc as including two coats of synthetic enamel paint over a coat of red oxide primer, 3mm thick glass panes and galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified & directed. |
| 21 | S&F for 30mm thick Factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, completed all as specified & directed.Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 22 | Supply & fix 125mm size aluminium alloy handles cast type anodized complete all as specified & directed. |
| 23 | S&F aluminium anodised tower bolts 150mm long, of extruded section completed all as specified & directed. |
| 24 | S&F Mild steel sliding bolt 300 long plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate completed all as specified & directed. |
| 25 | S&F mild steel medium weight colled rolled butt hinges 100mm in size complete all as specified and directed. |
| 26 | Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc completed all as specified & directed. |
| 27 | M & L 10 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed. |
| 28 | M & L 15 mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces finished even and smooth with out using extra cement complete all as specified & directed. |
| 29 | M&L Rendering 5 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3), completed all as specified & directed. |
| 30 | Preparation of new plastered surface of wall by applying 2mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper using roller for painting complete all as specified & directed. |
| 31 | Preparation of old surface after complete removal of existing treatment by mechanical means and applying 2mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper using roller for painting complete all as specified & directed. |
| 32 | M& L preparing plastered new surfaces of ceiling and applying 2mm thick wall care putty and two coats of oil emulsion distemper on ceiling surface completed all as specified & directed. |
| 33 | All as per item No. 32.00 here-in-before but one coat on old ceiling surface completed all as specified & directed. |
| 34 | M & L preparation of new plastered surface of wall and applying two coats of exterior emulson paint (weather proof) using using roller over and including applying 2mm thick putty after finishing the wall surfaces complte all as specified and directed. |
| 35 | M&L applying two coats of exterior emulson paint on old surface (weather proof) using roller over and including applying 2mm thick putty after scraping surface by mechanical means and finishing the wall surfaces complte all as specified and directed. |
| 36 | Cutting chases ,pinning in brick work girth exc 10cm but n exc 20 cm and making good to facing where required and poining in cement mortar 1:3 to ends of edges of landing, sun shades, chajjas, shelves etc completed all as specified & directed. |
| 37 | Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises completed all as specified & directed. |
| 38 | M&L Non skid ceramic coloured tiles 8-10 mm thick (Square/rectangular) area of each tile exceeding 0.11Sqm but not exceeding 0.18 Sqm in floors set and jointed in neat cement slurry and pointed with white or colour cemnt to match including 15 mm th screed bed in cm 1:6 completed all as specified & directed. |
| 39 | M&L for PCC 1:2:4 type B-1 (using 20mm graded stone agg) 25 mm thick for Sub base flooring all as specified completed all as specified & directed. |
| 40 | Supply & fix Light shade vitrified double charged tiles coloured superior quality 600mm x 600mm x 8 to 10mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor over & including 10mm thick screed in CM 1:4 and all as per manufacturer's instruction complete all as specified and directed. |
| 41 | All as per item No. 40.00 here-in-before but as in skirting over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 42 | S&F Coloured Glazed ceramic tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10mm thick plaster in CM(1:4) joint free with grout of matching shade completed all as specified & directed. |
| 43 | Taking up or down steel tubing and connection 15 mm bore pipe and removing from site completed all as specified & directed. |
| 44 | All as per item No. 43.00 here-in-before but 20 mm bore pipe completed all as specified & directed. |
| 45 | S&F tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors for 15 mm bore completed all as specified & directed. |
| 46 | All as per item No. 45.00 here-in-before but 20 mm bore pipe. |
| 47 | S&F triple layer 1000 Ltrs Rotational moulded polyethylene (PVC) water storage tanks cylindrical vertical with closed top including nipple nuts and washers for fixing inlet, outlet/washout pipes and air vent pipes and incl dismantling water tanks & removing completed all as specified & directed. |
| 48 | S&F 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule completed all as specified & directed. |
| 49 | S&F in repair bib taps brass cromium plated 15 mm bore size screwed down screwed for iron pipe or for brass ferrule completed all as specified & directed. |
| 50 | S&F in repair 15 mm dia stop cock/angle cock cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle, flench screwed both ends for iron completed all as specified & directed. |
| 51 | Supply and fixing in repair vitreous china wash down water closet pan (Pedestal Pattern) white excluding flushing cistern and flush pipe including connection to out going pipe and flushing pipe with 'S' Trap completed all as specified & directed. |
| 52 | Supply and fixing plastic water closet seat, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device completed all as specified & directed. |
| 53 | Supply and fixed in repair vitreous china urinal, Half stall type,white with grating, union for discharge pipe, flush pipe and waste pipe, CP urinal Spreader fixed to water supply pipe etc completed all as specified & directed. |
| 54 | S&F in repair of vitreous china squatting pan ‘Orrisa pattern’ size 580 x 440 mm white with integral foot rest including replacement of ‘P’ or ‘S’ trap lime concrete bedding and making good floor complete all as specified and directed. |
| 55 | Supply and fixed in repair of PVC low level flushing cistern 10 litre capacity valveless syphonic action type white i as approved incl ball valve float valve and handle,32 mm dia flush pipe completed all as specified & directed. |
| 56 | S&F Supply and Fixing in repair vitereous china wash basin white Oval type size 560x470x190mm but including 15mm bore pillar tap swan neck and 32mm da CP waste fitting and PVC waste pipe 610mm long completed all as specified & directed. |
| 57 | Supply & fix in repair PVC connections of 450mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed. |
| 58 | S&F in repair Brass chromium plated shower rose 125mm size completed all as specified & directed. |
| 59 | S&F in repair CP brass soap dish completed all as specified & directed. |
| 60 | Supply and fix in repair PVC Pipes single socketed in any length with rubber ring joints, fixed to walls, laid under floors etc. 75mm bore as in waste and rain water pipes complete all as specified & directed. |
| 61 | Supply and fix in repair PVC Pipes single socketed in any length with rubber ring joints, fixed to walls, laid under floors etc. 110 mm bore as in waste and rain water pipes complete all as specified & directed. |
| 62 | Supply and fix PVC bends/Tee 75mm bore, any radius complete all as specified & directed. |
| 63 | Supply and fix PVC bends/Tee 110mm bore, any radius complete all as specified & directed. |
| 64 | S&F Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia.fixed in repair) completed all as specified & directed. |
| 65 | M & L for cutting of bushes small trees (Peepal small plants etc) trunks shrubs of any dia and girth from roof projection, chajjas , wall junction parapet etc at any height by necessary demoliton of brick work etc if requried and making good distrubed surfaces to match with existing finishes with and including material and laboure in CM 1:4 mixed with WPC /PCC 1:3:6 type B0 /brick work in CM 1:4 as required at site and as directed by Engr-in-Charge |
| 66 | S&F (in repair)chromium plated towel rail 20mm dia D type 600 mm long as a approved quality complete all as specified and directed. |
| 67 | Taking down old existing water proofing treatment any type from the top of RCC/ arch slab, including PCC padding or plaster, tiles, mud etc, cleaning with water and disposal of rubbish off the premises complete all as specified & directed. |
| 68 | Material and Labour for 20mm thick cement paster in CM 1:4 mixed with WPC @ 200ml per 50 Kg by weight of cement finised even and smooth without using extra cement on roof surface and wall (WPC will be measured and paid seperately as supply only rate) completed all as specified & directed. |
| 69 | Supply only liquid water proofing compound completed all as specified & directed. |
| 70 | Material & labour for cleaning of concrete or plastered surfaces of roof and applying priming coat using with bituminous primer @ 0.30kg per Sqm followed evenly by a tack coat @ 1.20 kg per Sqm using 85/25 grade industrial hot blown bitumen , over it laid with 3mm thick APP modified polymeric water proofing membrane minimum weight 3.6 Kg per Sqm reinforced with non-woven polyester fabric (weight not less than 160 Gm per Sqm) unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer’s instruction and applying over it a tack coat using 85/25 grade industrial hot blown bitumen bitumen @ 1.20 kg per Sqm and finally finished the top of polymeric water proofing membrane with a coat of bituminous aluminum paint @ 0.20 kg per Sqm as per manufacturer’s instructions, complete all as specified & directed. (including existing water tank on roof disconnected and after cleanig same position connecting) |
| 71 | Supply and fixing PVC heavy duty waste pipes of 40/32mm bore suitable for wash hand basins/urinals complete all as specified & directed |
| 72 | S&f Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long completed all as specified & directed. |
| 73 | Supply and fix glass corner shelf fancy type made of 6 to 7 mm thick sheet glass of size 250mmx250mm fixed with chromium plated brackets complete all as specified and directed. |
| 74 | S&F factory made 1200 x 600 mm beveled edge mirror 5.5mm thick of selected quality glass and fixed to wall by wooden plugs with chromium plated brass screws and cup washers completed all as specified & directed. |
| 75 | M&L for 18 to 20 mm thick black granite stone factory made bull nosed, polished (table rubbed and polished) as in jambs, window cills, cooking platform and the like etc in cement mortar 1:4 including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of stone including rubbing and polishing over and including 10 mm thick rendering in cement mortar 1:4 including rounding of edges, making hole for gas pipe complete all as specified and directed. |
| 76 | M & L machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc completed all as specified & directed. |
| 77 | S&F Brand facroty Made 20mm thick 100% Solid WPC (Wood polymer Composite) plain Board of required size comprising of virgin PVC resin of K valve 57-60 (Suspension Grade), Calcium Carbonate and natural fibers (Wood powder/rice husk/ wheat husk) and non toxic additives, made from Extrusion process WPC foam sheet single Extruded (Inner) with density not less than 650Kg/cbm manufactured by as ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawal strength of 2000N (Face) & 1100N (Edge), minimum compressive strength of 50 n/Sq.mm, modulus of elasticity 850N/Sq.mm and resistance of spread of flame of class A category with property of being Termite/Borer Free. Water/Moisture proof, Fire Retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. Material test certificate and authentication should be complusary provided by the manufacturing company for Cabinate/Kitchen cupboard including 35mm necessary frame, (02x Auto Hinges, 02x 125mm Steel Handle, magnatic catcher in each leaf) completed all as specified & directed. |
| 78 | Supply and fixing for 20 mm dia mild steel powder coated curtain rods with wall thickness 1 mm including mild steel powder coated, bracket, holding and funnel on ends as fixed in repairs completed all as specified & directed. |
| 79 | Supply and fixing in repair stain less steel plate rack of size and design as approved of GE/Engr-in-charge made out of 1.00mm thick stainless steel (Salem sheet) and having weight between 9.0 Kg to 9.5 Kg each completed all as specified & directed. |
| 80 | Supply and fixing in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs washers and wasters incl bedding in cement mortar to dwarf walls or incl fixing cantilever brackets and connecting union to pipe over all size (915mmx460mm bowl size 410x330x160mm) completed all as specified & directed. |
| 81 | M&L 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection completed all as specified & directed. |
| 82 | Taking down carefully any type of battens or conduit point wiring with or except conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site completed all as specified & directed. |
| 83 | Material & labour for point wiring with FRLS PVC insulated 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, unsheathed copper conductor cable in existing PVC concealed conduit of size 20mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, sunk zinc coated pressed steel terminal boxes including all cutting / chases etc in walls, with 3mm thick plastic laminated sheet cover including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for One Tube light/bulb/street light point controlled by one, one way switch 05 / 06 Amps. |
| 84 | All as item No 83.00 here-in-before but one ceiling /exhaust fan point controlled by one, one way switch 05 / 06 Amps. |
| 85 | All as item No 83.00 here-in-before but one 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch. |
| 86 | All as item No 83.00 here-in-before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch. |
| 87 | All as item No 83.00 here-in-before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board. |
| 88 | Supply & fixing switch piano flush type, 05 / 06 Amps single pole, one way 240 volts completed all as specified & directed. |
| 89 | Supply & fixing socket outlet 3 pin, 05 / 06 Amps flush type 240 volts completed all as specified & directed. |
| 90 | Supply & fixing switch piano flush type, 15 / 16 Amps single pole, one way 240 volts completed all as specified & directed. |
| 91 | Supply & fixing of socket outlet 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts completed all as specified & directed. |
| 92 | Supply and fix decorative LED Batten 20 Watt polycarbonate housing integtrated type complete with all accessories and fixing material all as specified and directed. |
| 93 | Supply and fixing lamp holder , PVC / polycarbonate type back plate suitable for batten fitting complete with 1 x LED lamp 10 watt. |
| 94 | Supply and fix decorative LED Batten 10 Watt polycarbonate housing integtrated type complete with all accessories and fixing material completed all as specified & directed. |
| 95 | Supply & fixing of ceiling rose, 3 terminal PVC polycarbonate isolated body completed all as specified & directed. |
| 96 | Supply and fix vertical type IP-43-IK09 protection metal door DB 200 Amps rated copper bus bar, pan assembly etc with interlocking links, blanking plates cable ties identification labels TPN 12 way including taking down old unsv DB. completed all as specified & directed. |
| 97 | Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 08 way, with 200 Amps rated including taking down ol unserviceable completed all as specified & directed. |
| 98 | Supply & fixing in repair MCB SPN, AC, 240 volts of 63 Amps, C curve, 10 kA, completed all as specified & directed. |
| 99 | Supply and fixing MCB SP, AC, 240 volts of 06 to 40 Amps, C curve, 10 kA, completed all as specified & directed. |
| 100 | Supply and fixing Vertical Loadline sheet metal enclosure double door, Triple pole and neutral (TP&N vertical loadline) AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection, with the inbuilt provison for fixing of 1 No MCCB 3 Pole160Amps 36 KA, 415 volts and 12 Nos MCB's inside of DB, with metal door and flush to wall including grouting and cutting in existing wall and making good disturbed surface with two coats of white / colour washing / distempering etc to match the existing including taking down old unserviceable complete all as specified and directed. |
| 101 | Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 35 Sqmm 4core armoured, PVC sheathed with aluminium conductor heavy duty including taking down old unserviceable completed all as specified & directed. |
| 102 | Supply, laying commissioning, testing of XLPEunder ground LT cable 1100 volts grade of size 16 Sqmm 2.0 core armoured, PVC sheathed with aluminium conductor heavy duty including taking down old unserviceable completed all as specified & directed. |
| 103 | Supply / laying and fixing 40mm bore galvanised steel tubes with all fittings, light grade, laid in trenches for cable protection including taking down old unserviceable complete all as specified and directed. |
| 104 | M&L for washed river dry sand cushioning in trenches 80mm thick before laying the cable and 150mm thick after laying the cable including spreading levelling andhard punning completed all as specified & directed. |
| 105 | Material and labour for contineous brick edging with width equal to the depth of the brick of whole sub class 'B' bricks laid on edge complete all as specified and directed. |
| 106 | Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.5 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion completed all as specified & directed. |
| 107 | Supply and fixing new exhaust fan steel body AC single phase 230 V of size 450mm sweep with blade , frame and lauvers completed all as specified & directed. Note:- Old unsv exhaust fan shall be deposited at MES store yard. |
| 108 | Supply and fixing new exhaust fan steel body AC single phase 230 V of size 300mm sweep with blade , frame and lauvers completed all as specified & directed. |
| 109 | M&L for Ceiling fan hook made from steel structural, bracing support bend into shape for hanging of ceiling fan complete all as directed at site completed all as specified & directed. |
| 110 | Supply and fixing new ceiling fans complete with blades, down rods, electronic regulator and ccessories, 230 V, 1400 mm sweep. Min air delivery 245 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor ( BLDC.). Note:- Old unsv exhaust fan shall be deposited at MES store yard. |
| 111 | Supply and fixing in repair LED building security light fitting 1x35 Watt luminaries with die cast aluminium housing comprising epoxy poweder coated enclosed with glass cover in frame with high power LED white lamp of capacity 35 watt including brackets of 32 mm dia GI pipe medium grade upto 0.6 mtr long bend to required shape including flat iron clamps- 02 Nos with suitable size of nuts and bolts including grouted in wall completed all as specified & directed. |
| 112 | Material and labour for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLS- FLEXIBLE WIRING CABLE. CONFORMING TO IS: 694-1990 with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all MS conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing including taking down complete all as specified & directed. Note:- One meter of conduit along with 2x6 sq mm wire and one 6.0 sq mm earth shall be measured as one unit length. |
| 113 | Material and labour for sub main wiring with 04Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLS- FLEXIBLE WIRING CABLE. CONFORMING TO IS: 694-1990 with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all MS conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing including taking down complete all as specified & directed. Note:- One meter of conduit along with 2x4 sq mm wire and one 4.0 sq mm earth shall be measured as one unit length. |
| 114 | Supply and fix desert cooler electric driven single phase 230 Volt metallic body (GI) , thickness not less than 1.5mm capacity of water not less than 67 Ltr , 1440 RPM with copper winding and power consumption not more than 240 watt, 50 Hz complete all as specified and directed. |
| 115 | Supply & fixing industrial type SPN enclosure with a two pin and earth plug and socket complete with and including 32 Amps MCB, single pole, AC, 240 volts completed all as specified & directed. |
| 116 | Supply and fix electric water heatervertical storage type 25 Ltrscapacity having stainless steel steel inner tank with glass enamelled coating BEE 5 star rating ,closed/ ventilated type 240 volt ,glass coated heating element complete with element 2.0 KW and all accessories including fixing arrgement with syitable size of fastner, nuts,bolts and waster etc completed all as specified & directed. |
| 117 | Supply and fixing Electric Chimneyn 90 CM 1200 cum/hr auto clean covered glass Kitchen Chimney ,filterless technique including motion senser and touch control with duct and all accessories completed all as specified & directed. Please Enable Macros to View BoQ information |