Name of Work:- Construction of C.C. Road, Drain and Culvert from Shiv Vihar Shamshan Ghat to Bareilly Highway (Panwadiya Road) in District R ur , Construction of C.C. Road and Drain in SDM Colony, R ur, Laying of Interlocking Tiles in Collectorate Parking and alongside road from Collectorate R ur to District Court Complex, Construction of Parking Gate and Boundary wall in Collectorate R ur under Infrastructure Fund. | Sl. No. | Item Description | |
| 1 | Excavation in foundation by manual means in ordinary soil (Loam, clay or sand) including lift upto 1.50m and lead upto 30m and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in charge upto a distance of 30m from the foundation trenches. (Including all material, labour & machinery) SOR Rampur 2025 Item 251 Chapter 4 Page 11 | | 2 | Concrete with 40mm Gauge approved Stone ballast coarse sand of 2.20 - 3.60 F.M and cement in proportion of 8 : 4 : 1 in foundation and under floors including supply of all material, labour and T & P etc. Required for proper completion of the work. (Including all material, labour & machinery) SOR Rampur 2025 Item 281 Chapter 5 Page 12 | | 3 | Supply and fixing 80 mm thick precast cement concrete I shaped interlocking paverblock with top layer of minimum 8mm thickness having plan dimension 200 x (160+120 mm) of O.P. cement, smooth high gloss finish, skid resistant, manufactured from rubber moulds through vibro-compression machanism. The compressive strength of concrete paver blocks shall not be less than 30 MPA (M-30) & weight 5.0 Kg/No. confirming to IS: 15658-2006 with a 4 cm thick layer of fine sand including cost of all material, labour, T&P taxes etc required for proper completion of work as direction by E/I. Grey colour (Including all material, labour & machinery) Chapter-Additional Item, Page-51, SOR-2022 Moradabad, SI No-5 | | 4 | M-150 brick work in 1:4 ( One cement and four coarse sand of 1.50 - 2.00 F.M mortar) in foundation and plinth including supply of all materials, labour and T&P etc. required for the proper completion of the work. (Including all material, labour & machinery) SOR Rampur 2025 Item 305 Chapter 6 Page 14 | | 5 | M-150 class brick work in 1:5 cement coarse sand of 1.50 - 2.00 F.M mortar in super structure in one brick thick wall (230 mm) including necessary cutting and moulding of brick as required including supply of all materials, labour and T&P etc. required for the proper completion of the work. (Including all material, labour & machinery) SOR Rampur 2025 Chapter 6 Page 14 (Item 304+309+310) | | 6 | 12 mm Thick plaster with one part of cement and four part of approved coarse sand including supply of all materials, labour and completion of work. (Including all material, labour & machinery) SOR Rampur 2025 Chapter 13 Page 25 Item 584 | | 7 | Add for extra labour and materials for plaster over rough surface of one brick thick wall (Including all material, labour & machinery) SOR Rampur 2025 Chapter 13 Page 25 Item 584 | | 8 | Cast cement concrete in door sills, chaukhats, boundary posts, shelves and similar small work with cement approved coarse sand (F.M. 2.20-3.60) and 2 cm. gauge stone grit in proportion of 1:2:4 excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.I binding wire and including the cost of binding wire moulds all other materials, labour and T&P etc. required for proper completion of work. (Including all material, labour & machinery) SOR Rampur 2025 Item 282 Chapter-5, Page-12 | | 9 | R.C.C. work with cement approved coarse sand of 2.2 -3.6 FM and 2cm gauge approved stone grit in the proportion 1:1½:3 (1 cement: 4.5 mixed aggregate) in column excluding supply of reinforcement binding the same with 24BWGGI binding wire and including necessary centering and shuttering etc, and also including supply of all material labour and tools and plants etc required for proper completion of the work. (Including all material, labour & machinery) SOR Rampur 2025 Item 289 Chapter 5 Page 12 | | 10 | M.S. or TMT bars(FE-500D grade or higher) or HYSD Bars or iron in plain work such as R.C.C. or Column work (when not included in overall rates) wrought to required shape as necessary including bending for proper completion of work shape and including supply of steel. (Including all material, labour & machinery) SOR Moradabad 2022 Item 504 Chapter 10 Page 30 | | 11 | Mild Steel or iron work of small size and section such as holding down bolts, hold fast, tie roads, gratings etc (when not included in overall rates) wrought to required form including supply of steel, bolts, nuts and wastages etc and its fixing required for proper completion work. (Including all material, labour & machinery) SOR Moradabad 2022 Item 502 Chapter 10 Page 30 | | 12 | Finishing wall with water proof cement paint of approved make and quality on new work with two coats to give an even shade including preparing surface by the throughly cleaning & sand preparing and supply of all materials,T&P & labour, required for proper completion of work and for each coat of water proof paint after the first two coat to give even shade. (Including all material, labour & machinery) SOR Rampur 2025 Chapter 15 Page 31 Item (660+661)(66+23=89) | | 13 | Painting or varnishing work on wood /steel surface with one coat of ready mix priming paint & two coat of approved superior quality synthetic enamel paint including cleaning the surface of all dirt, dust & other foreign materials, sand papering & stripping including supply of all materials ,labour and T&P etc. required for proper completion of work. (Including all material, labour & machinery) SOR Rampur 2025 Chapter 15 NEW ITEM S. NO.(1+2+3iii)(23+30+25=78)Page- 31 | | 14 | Providing and laying design mix cement concrete of M-30 grade, in roads/taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineerin-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately). 16.43.2 Cement concrete manufactured in automatic batching plant (RMC plant) including transportation to site in transit mixer (Including all material, labour & machinery) DSR Item 16.43.2 Please Enable Macros to View BoQ information |
|