|
| 1 | Material and labour for preparing of surfaces old plastered or unplastered surfaces of walls of any description, scrapping, rubbing down with Sand Paper to obtain a Smooth Finish Surface with and including filling the existing Nails/ Screw Holes, etc. and applying applying wall care putty minimum 1 mm thick and Two Coats of Distemper Oil Emulsion, complete all as specified and as directed by Engr-in-Charge. |
| 2 | Material and labour preparing Old Decorated/Treated Wood and Wood Based Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint complete all as specified and as directed by Engr-in-Charge. |
| 3 | Material and labour preparing Old Treated/Painted Steel and Iron Surfaces of any description, not otherwise described, over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint complete all as specified and as directed by Engr-in-Charge. |
| 4 | Material and labour preparing Old Decorated/Treated Surfaces of Ceiling of any description with and including applying One Coat of White Wash, complete all as specified and as directed by Engr-in-Charge. |
| 5 | Material and labour preparing Old Decorated/Treated Surfaces of wall of any description with and including applying One Coat of White Wash, complete all as specified and as directed by Engr-in-Charge. |
| 6 | Taking down Cement Plaster including raking out Joints, hacking for Key, scrubbing down with Water and removing Debris to Outside MD/AF Land, complete all as specified and as directed by Engr-in-Charge. |
| 7 | Material and labour Rendering (Internal) 12mm thick in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces, Plastered Surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed by Engr-in-Charge. |
| 8 | Material and labour Rendering (Ceiling) 5.0mm thick in Cement Mortar 1:3 on Concrete Surfaces as in Ceiling, etc., Plastered Surfaces finished Even and Smooth, without using Extra Cement, complete all as specified and as directed by Engr-in-Charge. |
| 9 | Material and labour Rendering (External) 15mm thick (10mm+5mm) in CM 1:4 on Brick Walls or on Concrete Surfaces, mixing WPC as per manufacturers instructions, Plastered Surfaces finished Fair and Even, complete all as specified and as directed by Engr-in-Charge. NOTE: WPC will be Measured and Paid under appropriate Item. |
| 10 | Supply only Integral Water Proofing Compound, conforming to IS and/or as approved, complete all as specified and directed by Engr-in-Charge. |
| 11 | Material and labour preparing on newly plastered or unplastered surfaces of walls by applying a Coat of 1.00 mm thick Wall Care Putty including rubbing down with Sand Paper to obtain a smooth finish surface and applying Two Coats of Distemper Oil Emulsion (as approved) over a Coat of alkali resistant primer, complete all as specified and as directed by Engr-in-Charge. |
| 12 | Material and labour preparing Newly Plastered Surfaces of Ceiling and applying Three Coats of White Wash, complete all as specified and as directed by Engr-in-Charge. |
| 13 | Material and labour preparing newly Plastered surfaces of Walls by brooming down plastered surfaces with and including appying two coat of ACE Exterior Emulsion Anti- Algal weather coat Exterior paint with approved Tint above Exterior wall primer above trucare Exterior wall putty up to 1.50mm thickness in 2 coats of exterior emulsion paint. Paint shall be applied with Thread Roller. (as per Manufacturer's instructions), complete all as specified and as directed by Engr-in-Charge. |
| 14 | Material and labour Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed with Coarse Sand and Cement in the ratio 1:1:1 shall be applied and finish Even, complete all as specified and as directed by Engr-in-Charge. |
| 15 | Material and labour preparing newly Plastered surfaces of Walls by brooming down plastered surfaces with and including appying two coat of ACE Exterior Emulsion Anti- Algal weather coat Exterior paint with approved Tint above trucare Exterior wall primer. Paint shall be applied with Thread Roller (as per Manufacturer's instructions), complete all as specified and as directed by Engr-in-Charge. |
| 16 | Material and labour preparing for old decorative plastered surfaces of Walls by brooming down plastered surfaces of old work and cleaning old decorated surfaces using steel wire brush sand paper and scraping down including filling cracks upto 3mm using Crack seal and appying two coat of ACE Exterior Emulsion Anti- Algal weather coat Exterior paint with approved Tint. Paint shall be applied with Thread Roller (as per Manufacturer's instructions), complete all as specified and as directed by Engr-in-Charge. |
| 17 | Material and labour Non-asbestos Fiber Cement Building Boards 4.0mm thick, fixed to Walls with Rawl Plugs and Steel Screws complete all as specified and as directed by Engr-in-Charge. |
| 18 | Demolition Brick work built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc., complete all as specified and as directed by Engr-in-Charge. |
| 19 | Material and labour Brick Work with Sub-Class ‘B’ Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed by Engr-in-Charge. |
| 20 | Material and labour Brick work with Sub-Class ‘B’ Bricks but except Bricks (Serviceable Bricks obtained from Item No. 15 here-in-before) including removing old Mortar, Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in CM 1:6, complete all as specified and as directed by Engr-in-Charge. |
| 21 | Demolition of reinforced cement concrete on roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and as directed by Engr-in-Charge.NOTE : Reinforcement will be Measured and Paid separately under relevant Item. |
| 22 | Material and labour RCC (nominal mix) Type B1 1:2:4 (20mm graded aggregare) as in slabs supported on walls complete all as specified and as directed by Engr-in-Charge.NOTE : Reinforcement will be Measured and Paid separately under relevant Item. |
| 23 | Material and labour Formwork to fair finished surfases soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work complete all as specified and as directed by Engr-in-Charge. |
| 24 | Material and labour for formwork of fair finished surfaces of concrete to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs n.exc 20cm wide and side of RCC/PCC Bands in walls, horizontal or sloping and similar work exc 10cm but n.exc 20 cm wide as specified and directed by Engr-in-Charge. |
| 25 | Material and labour TMT Bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for Columns, hooking Ends and binding with and including Mild Steel Wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed by Engr-in-Charge. |
| 26 | Taking down chowkhat Frame with shutters (without taking off Shutter from the Frame) n. exc. 1.50 Square Metre Each, complete all as specified and as directed by Engr-in-Charge. |
| 27 | Supply and Fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete including M.S. hold fast/ lugs or SS dash fasteners as per direction of Engineer-in-Charge. |
| 28 | Supply and Fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 29 | Supply and Fixing Aluminium Barrel Tower Bolt 150mm long (weight not less than 160 Gram), Extruded Section, complete all as specified and as directed by Engr-in-Charge. |
| 30 | Supply and Fixing mild Steel Butt Hinge 100mm long medium weight and fixed, complete all as specified and as directed by Engr-in-Charge. |
| 31 | Supply and Fixing Aluminium Handle 150mm long, Cast type, anodised, complete all as specified and as directed by Engr-in-Charge. |
| 32 | S & F Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) 250 mm long and fixingclips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminiumalloy and fixed complete all as specified and directed by Engr-in-Charge. |
| 33 | Taking down Shutter of any description exc 1.00 Sqm and not exc. 2.00 Sqm Each and Refixing in the Same Opening, after resecuring or easing and adjusting, etc., complete all as specified and as directed by Engr-in-Charge. |
| 34 | Taking down chowkhat Frame with shutters (without taking off Shutter from the Frame) exc. 1.50 Sqm but n exc 4sqm Each, complete all as specified and as directed by Engr-in-Charge. |
| 35 | Taking down Shutters of any description exc 1 sqm but n exc. 2 sqm each complete all as specified and as directed by Engr-in-Charge. |
| 36 | Supply and Fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/ Ceosetory windows & other Frames / Chowkhat of size 65x100mm comprising of virgin PVC Polymer of K valvue 58-60 (Suspension Grade) Calcium Carbonate and natural fibers (Wood powder/rice husk/ wheat)husk) and non toxic additives (Maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying after applyin PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N(Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia andlength complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. specification & drawing complete all as specified and directed by Engr-in-Charge. |
| 37 | Supply and Fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note:- For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. hall be made. specification & drawing complete all as specified and directed by Engr-in-Charge. |
| 38 | Supply and Fixing 30mm thick Factory made wire mesh solid WPC (Wood Polymer Composite) shutter of consisting density of 600 Kg/Cum and door to be panelled with SS Mosquito mesh (wire mesh) and XTN Aluminium mesh for for additional strength and safety purpose hologram to be clearly visible on material, manufacturer test certificate to be submitted complete all as specified and as directed by Engr-in-Charge. |
| 39 | Supply and Fixing Floor Door Stopper 150mm in size, Aluminum alloy Body and Tongue with Hard Drawn Steel Spring (weight not less than 90 Gram), complete all as specified and as directed by Engr-in-Charge. |
| 40 | Supply and Fixing factory made uPVC white colour Sliding window n.exc 2 Sqm Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware Touch Lock of zinc alloyed (white powder coated), steel roller system, Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and directed by Engr-in-Charge. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) |
| 41 | Supply and Fixing factory made uPVC white colour ventilator top hung or casement type area n.exc 1.00 Sqm made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass complete all as specified and directed by Engr-in-Charge. Note : The unit rate shall be included SS / aluminium wire mesh and 5mm thick figured /froasted glass with all other accessories zing with selected. |
| 42 | Supply and Fixing Sheet Glass 4.80mm thick, ordinary quality and glazing with Oil Putty in Square exc. 0.50 Sqm in Each Pane, complete all as specified and as directed by Engr-in-Charge. |
| 43 | Supply and Fixing 300mm long Mild Steel spring for doors ordinary rat tail rod pattern springs including roller and roller plate and fixed complete all as specified and directed by Engr-in-Charge. |
| 44 | Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/ spring clips and providing and fixing new ones or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed by Engr-in-Charge. |
| 45 | Supply and Fixing Sheet Glass 3.0mm thick, ordinary quality and glazing with Oil Putty in Square n.exc. 0.50 Sqm in Each Pane, complete all as specified and as directed by Engr-in-Charge. |
| 46 | Fixed in repairs wire netting of stainless steel wire 1.4mm dia fixed with tinned tacks of stainless steel wire staples complete all as specified and as directed by Engr-in-Charge. |
| 47 | Supply and Fixing Stainless Steel Curtain Rod 25mm dia/bore (as approved) including fixing stainless steel Bracket (shaped as approved) not less than 80mm long to wall with Screws/ secured with stainless steel side doom(as approved) fitted/tightened on Curtain Rod at both ends with screw, complete all as specified and as directed by Engr-in-Charge. |
| 48 | Supply and Fixing 18mm thick HDHMR (High Density High Moisture Resistant) Waterproof prelaminated board for cupboard / cabinets fixed with over necessary support of piece of HDHMR board with screws including supplying & fixing of stainless steel SS 304 Grade Auto Concealed Cabinet Hinges (Zero degree) full overlay cabinet hinges of of adequate size fixed with cabinet hinge repair plate (minimum of 02 Nos for Each leaf) to hold cabinet door, Stainless Steel Silver chrome Door Handle 100mm long (01 No for each leaf of shutter), 150mm long Hasp and staple, safety type, brass with mild steel hinge pin with screws complete all as specified and as directed by Engr-in-Charge. NOTE: Quoted unit Rates are inclusive of WPC board, handles, hasp & staple, hinges,screws etc complete incl dismantling all as specified and directed by Engr-in-Charge. |
| 49 | Supply and Fixing 18mm thick HDHMR (High Density High Moisture Resistant) Waterproof prelaminated board for internal partitions, shelves and carcass of cupboards, cut to required sizes and fixed in position with approved screws, cleats, shelf pins and fittings, incl all necessary supporting members, labour, materials, wastage and incidental works complete all as specified and directed by Engr-in-Charge. |
| 50 | Supply and Fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 18mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws etc incl dismantling complete all as specified and directed by Engr-in-Charge. |
| 51 | Dismantling Stone Slabs and/or Tiles of any description or thickness in Floors, Aprons, etc. laid, bedded and pointed in cement mortar and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed by Engr-in-Charge. |
| 52 | Material and labour Granite (of any type) Tiles 18mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement and admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed by Engr-in-Charge.NOTE : Cost of Cement Screed Bed in CM 1:4 is deemed to be included in the Quoted Unit Rate. |
| 53 | Material and labour Granite (of any type) Tiles 18mm thick machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement and admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed by Engr-in-Charge.NOTE : Cost of rendering in CM 1:4 is deemed to be included in the Quoted Unit Rate. |
| 54 | Dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing) and removing debris, etc. to Outside MD/AF Land, complete all as specified and as directed by Engr-in-Charge. |
| 55 | Material and labour Non skid joint free ceramic coloured tiles 7 to 8mm thick (Square/Rectangular), area of each tile exc 0.18sqm but not exc 0.38 sqm in Floors, etc. set and jointed in Neat Cement Slurry and pointed in White or Coloured Cement to match the Tiles, laid over and including 15mm thick Screed or Screed Bed in CM 1:6, complete all as specified and as directed by Engr-in-Charge.NOTE : Cost of Cement Screed Bed of CM 1:6 is deemed to be included in the Quoted Unit Rate. |
| 56 | Material and labour Non skid joint free ceramic coloured tiles 7 to 8mm thick (Square/Rectangular), area of each tile exc 0.18sqm but not exc 0.38 sqm in skirting in Vertical Surface i.e. Dado, Skirting,etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including 10mm thick Screed or Screed Bed in CM 1:4, complete all as specified and as directed by Engr-in-Charge.NOTE : Cost of Cement Screed Bed of CM 1:4 is deemed to be included in the Quoted Unit Rate. |
| 57 | Material and labour Non-skid Coloured Ceramic joint free Tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm in Flooring, set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including Screed or Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed by Engr-in-Charge.NOTE : Cost of Cement Screed Bed of CM 1:6 is deemed to be included in the Quoted Unit Rate. |
| 58 | Material and labour Coloured/Printed Glazed Ceramic Tiles 450x350x7mm thick in Vertical Surfaces i.e. Dado, Skirting, etc., set and jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, laid over and including Screed or Screed Bed 10mm thick in Cement Mortar 1:4, complete all as specified and as directed by Engr-in-Charge.NOTE : Cost of Cement Screed Bed of CM 1:6 is deemed to be included in the Quoted Unit Rate. |
| 59 | Supply and Fixing in repair Angular Stop Cock fancy type with wall flange 15mm bore (dia) complete all as specified and as directed by Engr-in-Charge. |
| 60 | Supply and Fixing in repairs Vitreous China White Squatting Pan of size 580x440mm, Orissa Pattern with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan, Cones, India Rubber (nozzles of WC Pan) incluiding provision Concrete Bedding and Making Good to distrubed surfaces complete all as specified and as directed by Engr-in-Charge. |
| 61 | Material and labour in repairs PVC Flushing Cistern 10 Litre capacity White, Low Level, Valve less, Syphonic action type with Inlet, Ball Valve, Float and Handle, Flush Pipe of polyetylene of high density or PVC 32 mm dia for low level cistern of suitable Length, a pair of Cast Iron Bracket/ Erecting Stand duly painted including cutting and pinning in Ends, Making Good Disturbed Surfaces in CM 1:3, complete all as specified and as directed by Engr-in-Charge. |
| 62 | Supply and Fixing PVC Connection Pipe 15mm size and 45 Cm in length with Adopter Nuts of PVC, complete all as specified and as directed by Engr-in-Charge. |
| 63 | Material and labour cleaning and removing all scales and dirts from inside of PVC water tanks of capacity exc 500 Ltr and n.exc 1000 Ltr by scrubbing the deposits with wire brush, bleaching powder etc incl re-fixing the tanks in the same position and re-connectiing all water lines and float valves incl writing letters \\"CLEANED ON \\"DD/MM/YYYY\\" (ie., date of cleaning tank) n.exc 50mm in height and testing complete all as specified and directed by Engr-in-Charge. |
| 64 | Material and labour Rotational Moulded Polyethene Water Storage Tank 500 Litre Capacity, Cylindrical, Vertical with Closed Top, 3 layered, hoisted and fixed in Position all as specified in MES Schedule including dismantling/ lowering down unserviceable Water Storage Tanks, complete all as specified and as directed by Engr-in-Charge. |
| 65 | Supply and Fixing in repairs Ball Valve 20mm dia (minimum Weight 210 Gram), high pressure of PTMT with epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe, complete all as specified and as directed by Engr-in-Charge. |
| 66 | Supply and Fixing PVC (SWR) Floor Trap 75mm bore (dia) with Grating including jointing to Waste Pipe fixed in Cement Concrete 1:2:4 (20mm graded stone aggregate) and fixed-in-repairs, complete all as specified and as directed by Engr-in-Charge. |
| 67 | Supply and Fixing PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, laid in Floors and Fixed-in-repairs, complete all as specified and as directed by Engr-in-Charge. |
| 68 | Supply and Fixing PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, laid in Floors and Fixed-in-repairs, complete all as specified and as directed by Engr-in-Charge. |
| 69 | Supply and Fixing PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, fixed to Walls and Fixed-in-repairs, complete all as specified and as directed by Engr-in-Charge. |
| 70 | Supply and Fixing PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, fixed to Walls and Fixed-in-repairs, complete all as specified and as directed by Engr-in-Charge. |
| 71 | Supply and Fixing PVC (SWR) Bend 75mm bore (dia), any radius with Access Door, etc. jointing with Solvent Cement and Fixed-in-repairs, complete all as specified and as directed by Engr-in-Charge. |
| 72 | Supply and Fixing PVC (SWR) Bend 110mm bore (dia), any radius with Access Door, etc. jointing with Solvent Cement and Fixed-in-repairs, complete all as specified and as directed by Engr-in-Charge. |
| 73 | Supply and Fixing in repair PVC in(SWR) junction single, (single T) / Cross T equal or unequal 75mm bore with access door etc complete all as specified and directed by Engr-in-Charge. |
| 74 | Supply and Fixing in repair PVC (SWR) junction single, (single T) / Cross T equal or unequal 110mm bore with access door etc complete all as specified and directed by Engr-in-Charge. |
| 75 | Supply and Fixing in repair PVC (SWR) vent cowl 75 mm bore etc complete all as specified and directed by Engr-in-Charge. |
| 76 | Supply and Fixing in repairs PVC (SWR) (SWR) gully trap 125/110 mm with and including setting and jointing with solvent cement complete all as specified and as directed by Engr-in-Charge. |
| 77 | Demolition & breaking up Drain Pipe 150mm dia (Salt Glazed Ware, AC or Reinforced Concrete) set in Cement Mortar, alongwith Excn of Earthwork, concrete bedding and removing debris out of MoD/AF Land and making good complete all as specified by Engr - in - Charge. |
| 78 | Supply and Fixing 150MM dia Double wall corrugated (DWE PE) (SN8) laid and jointed complete with collers complete all as specified and directed by Engr - in - Charge. |
| 79 | Demolition Cement Concrete (reinforced) of any description (above or below Ground Level) and removing debris, etc. to Outside of MD/AF Land, complete all as specified and as directed by Engr-in-Charge.(NOTE: Reinforcement of the demolished RCC members shall be measured under Sch of Credit. |
| 80 | Material and labour Pre-cast Reinforced Cement Concrete type B-1, 1:2:4 (20mm graded stone aggregate) in Slabs, Manhole Cover Slabs, etc., set in Cement Mortar 1:4, with necessary formwork etc complete all as specified and as directed by Engr-in-Charge.Note: The unit rates are inclusive of placing cover slab at different locations as directed by Engr-in-Charge. |
| 81 | Taking up or down Steel Tubing 15mm bore (dia) and Connections, segregating the Serviceable Pipes and Connections, stacking properly at Site(s) and keep in Safe Custody for re-use, complete all as specified and as directed by Engr-in-Charge. |
| 82 | Taking up or down Steel Tubing 20mm bore (dia) with Fittings/ Connections, segregating Serviceable Pipes and Fittings/ Connections and keep in Safe Custody for re-use, complete all as specified and as directed by Engr-in-Charge. |
| 83 | Supplying and laying of 20mm outer dia CPVC pipes SDR11 & Plain CPVC SDR11 fittings on walls/ceiling or laying in floors complete all as specified |
| 84 | Supplying and laying of 25mm outer dia CPVC pipes SDR11 & Plain CPVC SDR11 fittings on walls/ceiling or laying in floors complete all as specified |
| 85 | Supply and Fixing in repairs Bib Tap 15mm bore (dia), Cast Copper alloy, Chromium Plated, Fancy type long Body with Capstan Head, screwed down, screwed for Iron Pipe or for Brass Ferrule , complete all as specified and as directed by Engr-in-Charge. |
| 86 | Supply and Fixing in repair Vitreous China Wash Hand Basin 450x300mm in size, White (Flat Back) with Brass Chromium Plated Waste Fitting 32mm bore (dia) and PVC Waste Pipe 32mm bore (dia) including a Pair of Cast Iron Brackets Brackets Erecting Stand duly painted including cutting and pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3, complete all as specified and as directed by Engr-in-Charge. |
| 87 | Supply and Fixing in repairs Pillar taps, cast copper alloy, Fancy type , chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge. |
| 88 | Supply and Fixing in repair PVC Waste Pipe 32mm bore (dia) having 60 - 75 Cm long (as required at Site) , complete all as specified and as directed by Engr-in-Charge. |
| 89 | Supply and Fixing in repair Shower Rose 125mm in size, Brass Chromium Plated, Fancy type with Swivel Joints including Flange and suitable for fixing Steel Pipe 15mm bore (dia) or Union, complete all as specified and as directed by Engr-in-Charge. |
| 90 | Supply and Fixing in repair Towel Rail 450mm long of PTMT fixed with and including Chromium Plated brass screws and wooden/plastic cleats (Minimum weight 170 gms) complete all as specified and directed by Engr-in-Charge. |
| 91 | Supply and Fixing in repair Mirror 600x450mm in size, Beveled Edge of Selected quality Glass, fixing with Brass Chromium Plated Knobs/Spacers 25mm to 30mm size (One Each in Corner), complete all as specified and as directed by Engr-in-Charge. |
| 92 | Supply and Fixing in repair Glass Shelf (Bath Tray) Accessories 45x15 Cm in size , complete all as specified and as directed by Engr-in-Charge. |
| 93 | Supply and Fixing in repair Sink made of Stainless Steel 1.0mm thick Kitchen or Laboratory overall size 495x420mm having Bowl size 410x330x160 mm with Plugs, Washers and Wastes, PVC Waste Pipe 40mm bore (dia) of suitable Length, waste coupling of PTMT of 40mm dia etc. including bedding in Cement Mortar to Dwarf Wall or including fixing Cantilever Brackets and connecting Union to Pipe, complete all as specified and as complete all as specified and as directed by Engr-in-Charge. |
| 94 | Supply and Fixing in repairs Brass Chromium Plated Sink Mixer for mixing hot & cold water screwed down for iron pipe and fixed 15mm bore (dia), including Wall Flanges, complete all as specified and as directed by Engr-in-Charge.. |
| 95 | Supply and Fixing in repair Stainless Steel Plate Rack 75x75x25 Cm in size, made out of Stainless Steel 1.0mm thick with all Internal Fittings and fixing with Brass Chomium Plated Mild Steel Screws, complete all as specified and as directed by Engr-in-Charge. |
| 96 | Supply and Fixing in repair Grating doom 100mm dia of PTMT(Minimum Weight 25 gms) , complete all as specified and as directed by Engr-in-Charge. |
| 97 | Material and labour for repairing spalled/damaged concrete surfaces in RCC members (slabs, beams, columns, ceiling etc) with polymer modified repair mortar and associated materrials complete all as directed by Engr-in-Charge. The work shall be executed in the following steps :-(a) Step 1 (Marking and Cutting) . Mark the damaged / spalled are in a regular shape (square or rectangular) and cut the edges to a depth of al least 10-15mm using a chisel or mechanical cutter to expose sound concrete and reinforcement, avoiding feather edges. (b) Step 2 (Removal and Cleaning) . Remove all loose, delaminated and unsound concrete, clean the surface thoroughly by mechanical wire brushes, compressed air, or water jet to remove dust, laitance, and loose particles. (c) Step 3 (Cleaning or Reinforcement) . Expose the corroded reinforcement fully. Clean the steel thoroughly by mechanical wire brushing, rust remover, or other approved means to remove all scales and corrosion. (d) Step 4 (Application of Rust Remover) . Apply rust remover chemical to the cleaned reinforcement bars using a brush and allow it to react as per manufacturer's instructions. (e) Step 5 (Zinc Rich Primer on Reinforcement). After cleaning with water and drying apply one coat of zince rich primer to the reinforcement bars to prevent further corrosion Allow adequate drying as per manufacurer's instructiuon. (f) Step 6 (Bonding Coat). Applying a bonding coat of approved bonding agent (ie., polymer latex/epoxy bonding agent) on the prepared concrete surface. The repair mortar shall be applied while the bonding coatg is still tacky. (g) Step 7 (Application of Repair Mortar). Rebuild the damaged area with polymer modified mortar repair mortar (pre-packed), non shrink, approved brand) or micro concrete for larger or deeper repairs, restoring the original profile and level.(h) Step 8 (Fixing of Chicken Mesh) : Provide and fix chicken wire mesh (12.5 mm × 22 SWG, hexagonal type) over the affected area, fixed with nails or screws at suitable spacing to ensure proper anchorage with the surface. |
| 98 | Material and labour for repairing spalled/damaged concrete surfaces in RCC members (slabs, beams, columns, ceiling etc) with polymer modified repair mortar and associated materrials complete all as directed by Engr-in-Charge. The work shall be executed in the following steps :-(a) Step 1 (Marking and Cutting) . Mark the damaged / spalled are in a regular shape (square or rectangular) and cut the edges to a depth of al least 10-15mm using a chisel or mechanical cutter to expose sound concrete and reinforcement, avoiding feather edges. (b) Step 2 (Removal and Cleaning) . Remove all loose, delaminated and unsound concrete, clean the surface thoroughly by mechanical wire brushes, compressed air, or water jet to remove dust, laitance, and loose particles. (c) Step 3 (Cleaning or Reinforcement) . Expose the corroded reinforcement fully. Clean the steel thoroughly by mechanical wire brushing, rust remover, or other approved means to remove all scales and corrosion. (d) Step 4 (Application of Rust Remover) . Apply rust remover chemical to the cleaned reinforcement bars using a brush and allow it to react as per manufacturer's instructions. (e) Step 5 (Zinc Rich Primer on Reinforcement). After cleaning with water and drying apply one coat of zince rich primer to the reinforcement bars to prevent further corrosion Allow adequate drying as per manufacurer's instructiuon. (f) Step 6 (Bonding Coat). Applying a bonding coat of approved bonding agent (ie., polymer latex/epoxy bonding agent) on the prepared concrete surface. The repair mortar shall be applied while the bonding coatg is still tacky. (g) Step 7 (Application of Repair Mortar). Rebuild the damaged area with polymer modified mortar repair mortar (pre-packed), non shrink, approved brand) or micro concrete for larger or deeper repairs, restoring the original profile and level.(h) Step 8 (Fixing of Chicken Mesh) : Provide and fix chicken wire mesh (12.5 mm × 22 SWG, hexagonal type) over the affected area, fixed with nails or screws at suitable spacing to ensure proper anchorage with the surface. |