|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GARRISON ENGINEER (AF) BANGALORE NAME OF WORK : PROVISION OF SECURITY RELATED WORKS AT CHAFB CA NO: GE(AF)/B/ OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Item of Work Item Code / Make Quantity Unit Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT (in Words) |
| 2 | Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided for including cutting of steel reinforcement as required to facilitate demolition, complete all as specified and directed. |
| 3 | Demolition of brickwork or stone/boulder masanory,laid dry below or above ground level and removing material from site complete all as specified and directed. |
| 4 | Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation, etc, not exc 10 sqm on plan and not exc 1.5m in depth and getting out in hard soil complete all as specified and directed. |
| 5 | All as per Sl Item No 3.00 here-in-before but exc 1.5m but not exc 3.00 m deep and getting out in hard/dense soil complete all as specified and directed. |
| 6 | M&L for plain Cement concrete 1:4:8 type D2 using 40mm graded stone agg as in foundations, filling and mass-concrete complete all as specified and directed. |
| 7 | M&L RCC M-25 grade with using 20mm stone aggregate as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc; basement slabs, under reamed piles and mass concrete complete all as specified and directed. |
| 8 | M&L RCC M-25 grade with using 20mm stone aggregatte as in columns, pillars, piers, posts and struts etc complete all as specified and directed. |
| 9 | M&L RCC M-25 using 20mm graded aggregate as in beams, cantilevers, bressumers, lintels over 1.5m span complete all as specified and directed. |
| 10 | M&L RCC M-25 using 20mm graded aggregate as in slabs supported on columns and beams complete all as specified and directed. |
| 11 | Formwork to sides to concrete foundations, footings, base of columns, raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter fair finished surfaces of concrete etc complete all as specified and directed. |
| 12 | Formwork to sides of pillars, posts, struts, piers, colums and stanchions fair finished fair finished surfaces of concrete etc complete all as specified and directed. |
| 13 | Formwork to sides and soffits of floor or roof beam, beam hauchings, girders, bressummers, lintels, cantilever, shelves including supports, overhangs, etc. also splays between floors and beams, etc finished rough and flat complete all as specified and directed. |
| 14 | Formwork to sides and soffits of suspened slabs such as roof slabs, floor slabs, ladings and similar work, not exc. 200mm thick (horizontal or sloping) finished rough and flat complete all as specified and directed. |
| 15 | M&L for Precast cement concrete block masonry with solid blocks, exc 10cm in width and setting in mortar type C1 1:3:6 set in cement mortar 1:6 complete all as specified and directed. |
| 16 | S&F mild steel TMT Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping of columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 17 | Ditto All as per Sl Item No 15.00 here-in-before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders etc. |
| 18 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm thick with soil / loose soil complete all as specified and directed. |
| 19 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed. |
| 20 | M&L 15mm thick rendering on fair faces of brick work, concrete surfaces of columns in cement mortar 1:4, finished even and fair, complete all as specified and directed. |
| 21 | M&L 10 mm thick rendering for fair faces of concrete surfaces on walls in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and directed. |
| 22 | M&L for 5 mm thick rendering for fair faces of concrete surfaces on ceiling in cement mortar 1:3 for fair finished surfaces complete all as specified and directed. |
| 23 | M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper (acrylic) white or tinted over a coat of 1 mm thick wall care putty, complete all as specified and directed. |
| 24 | Material & Labour for preparing new plastered surfaces of ceiling and applying two coats of oil bound distemper (acrylic) white or tinted over a coat of 1 mm thick wall care putty on ceiling complete all as specified and directed. |
| 25 | M&L for preparation of new or prevously untreated plastered surfaces of walls /jallies/louvers etc and applying two coats of cement base paint , white or tinted complete all as specified and directed. |
| 26 | Taking down wooden chowkats or frames area not exceeding 1.50 Sqm (w/o taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good in cement mortar 1:3 or PCC 1:2:4 type B1, complete all as specified and as directed. |
| 27 | Taking down wooden chowkats or frames area exceeding 1.50 Sqm and not exceeding 4.00 Sqm (w/o taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good in cement mortar 1:3 or PCC 1:2:4 type B1, complete all as specified and as directed. |
| 28 | S&F 100% Solid WPC (Wood Polymer Composite) Door Frames of cross section 65 mm x 125 mm (moulded) having single rebated made from Wood Polymer Composite (Single Extruded Process) material comprising of virgin PVC polymer of K-Value 57-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ruce husk/wheat husk)and non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treated star headed screws having minimum frame density of 780 Kg/cbm & manufactured by \\"Rajshri/Echon or Eq\\" an ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawal strength of (Min, 990N) Minimum compressive strength of 58 N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer prof, water/moisture proof & fire retardant & fixed in position with and including SS Dsh Fasteners/Hold Fast of required dia and length, all as per specifications drawings as directed, Material test certificate and authentication should be compoulsory provided by the manufacturing company complete all as specified and directed. |
| 29 | S&F 2nd class hard wood 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed. |
| 30 | S&F IInd class (hollow) hard wood factory made 35mm thick glazed skelton shutters, open rebated and prepared to receive glass, gauge etc. divided into squares edges of framing, plain, chamfered or rounded, mitred fitted with cut and mitred beads for securing glass/gauge etc. with sizes of members of shutters as specified in para 8.24(a) of SSR 2009 (Part I), complete all as specified and directed. |
| 31 | S&F 200 mm long aluminium anbodised barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 32 | S&F150 mm long Extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed. |
| 33 | S&F 100 mm butt hinges, medium weight cold rolled mild steel and fixed complete all as specified and directed. |
| 34 | S&F alluminum alloy, anodised, cast type or extruded section, sliding door bolt with hasp & staple (bolt type) with fixing clips and bolts and 300 mm long complete all as specified and directed. |
| 35 | S&F in repairs double legged door stopper of overall length of cover plate 150 mm of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floors and rubber complete all as specified and directed. |
| 36 | S&F in repairs MS helical door spring 300 mm long fixed with screws to wooden chowkhats or fixed with welding to steel chowkhats complete all as specified and directed. |
| 37 | S&F Powder coated aluminium windows/ventilator/partition etc fixed/openable type or sliding without sash bar, aluminium section weighing 0.55 kg/m including necessary jointing cleats, glazing clip,rubber packing, anodised aluminium snap beading, screw etc complete all as specified and directed. |
| 38 | S&F Anodised aluminium grill of (anodised transparent or dyed to required shade according to IS:1868 with minomum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to the existing window frame with C.P. brass / stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised alumiinium standard section around the opening, all complete as per requirement complete all as specified and directed. |
| 39 | S&F Galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staple or fixing with beads to wooden joinery when fixed in panels of joinery,complete all as specified and directed. |
| 40 | S&F steel for 4mm thick figured glass, ordinary quality and glazing rubber beading in square n exc 0.5 sqm in each pane complete all as specified and directed. |
| 41 | M&L for preparation of new surfaces of wood and wood based surfaces of any description, over 10cm in width or girth and apply two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 42 | Dismantling wrought iron or mild steel work of any description not otherwise provided for and complete all as specified and directed. |
| 43 | S&F for framed work for ornamental gates such as grills, gratings, etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and framed and hung as gates, icluding pintle hinges, stop, hand-made sliding bolts, etc similar work conforming to Fe.290 Gde-E 165, complete all as specified and directed |
| 44 | S&F for MS work in tubular trusses including special shaped washer etc complete ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240, as in doors or gates of pipes or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings including steel sheeting or other covering, running rails and guides for valley/gutter and hanging, also fastening and fixing complete all as specified and as directed. Notes : (i) Bending before welding of all tubular steel section shall be done whether at workshop or at site (insitu) as shown in architectural drgs. (ii) Rates for bending of sections shall be paid for separately under relevant items. |
| 45 | labour only for Bending of hollow steel sections to meet the desired shape of truss as shown in drgs complete all as specified and as directed. |
| 46 | M&L for two coats of synthetic enamel paints over a coat of zinc chromate primer including preparation of new steel surface of any description over 10 cm in width girth not other wise described complete all as specified and as directed. |
| 47 | S&F Prepainted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having 550 Mpa tensile strength as in roof covering/cladding and fixed with self tapping screws, complete all as specified and as directed. Note : Bending of sheet according to the shape of tubular steel section if required shall be inclusive of quoted rates. |
| 48 | S&F PVC (SWR) pipes 110mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors or in walls including bạnd as required complete all as specified and as directed. |
| 49 | S&F 300mm size stainless steel letters, in Hindi / English/Kannad and fix with stainless steel screws complete all as specified and as directed. |
| 50 | S&F designer wall tiles 450x350x7 mm or 350x 250x 7 mm size over 20 mm thick cm 1:4 rendering on stone wall surfaces complete all as specified and directed. |
| 51 | Removing building materials etc, (other than spoil like bricks, stone, aggregate, stone slabs etc.) to a distance of upto and incl 9000m, including loading, unloading and stacking at the destination, complete all as specified and as directed. |
| 52 | Design, S&F at site of the TRAY PANEL SCREW type system with aluminium composite panel of approved colour on exterior walls, coloums, MS structure, ceiling, coping, slab, projectons at all heights and elevation including neccesary aluminium framework. The aluminium composite panel should be 4mm thick consist of 3mm thick thermoplastic core of anti oxidant LDPE sandwitched between 2 skins of 0.5mm thcik aluminium alloy sheet making a total panel thickness of 4mm. The external surface shall be finished with PVDF based coating on the top side and service coating on the reverse side shall be with a polymer complete all as specified and as directed. Notes:- The system shall be designed to withstand a wind pressure of 190 kg/Sqm with necessary Al sub frames, cleats and shall be fixed to the masonry/ RCC walls/ MS structure with necessary clamps, galvanized M.S brackets and anchor fasteners. All clamps and brackets shall be Hot dip galvanized minimum 80 microns thick and shall conform to IS: 4759-1996. Any other acessories such as fastening straps, nuts, bolts, rivets, washers, etc. other than anchor system shall be in Indian standard grade. all joints of ACP must be sealed with approved sealent of approved colour. şealant make DOW CORNING 789 weather sealant. Rate shall include to provide open cell polyethylene backer rods, weather sealant etc, all materials and labour complete, the above provision is inclusive of all kind of necessary scaffolding up to 10 mtr height etc. |
| 53 | M&L for point wiring concealed type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing into and including rigid non-metallic PVC surface conduit of 20mm dia or higher, medium grade complete with all PVC conduit accessories, metal flush box of 1.60 mm thick suitable for modular switches/ sockets/fan regulators incl modular white cover plate and modular metal flush box with frame of required modules with, blanking plates, brass screws, cup washers etc including all cutting / chases etc in stone/ brick masonary/ walls and making good to the disturbed surfaces complete all as specified and directed for the followings :- |
| 54 | One light / fan point controlled by one, one way switch 06 Amps |
| 55 | One 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch |
| 56 | One 3 pin, 06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch |
| 57 | All as per Sl Item No 52.00 here-in-before but point wiring with 2.5 Sqmm single core FRLS cables and earth continuity wire of 2.5 Sq mm single core FRLS cable for one 3 pin 15 Amps socket out let point controlled by one, one way switch on independent board. |
| 58 | S&F modular switch, 06 Amps, single pole, one way, 230 volts, one module complete all as specified and as directed. |
| 59 | S&F modular switch, with indicator, 16 Amps, single pole, one way, 230 volts complete all as specified and as directed. |
| 60 | S&F modular socket outlet 05 Pin, 06 Amps, 02 module with shutter complete all as specified and as directed. |
| 61 | S&F modular socket outlet 02 in 01, 03 pin, 16 Amps, 02 module with shutter complete all as specified and as directed. |
| 62 | S&F ceiling fan complete with three blades,down rod, accessories 230 V, 1200 mm sweep, min air delivery 210 CFM, BEE 5 star rated with BLDC (brushless direct current motor) incl connection complete all as specified & directed. |
| 63 | S&F ceiling fan regulator, stepped type of 0 to 05 rotary steps, electronic, 02 module, humfree, AC, 230 volts, 100 watts complete all as specified and as directed. |
| 64 | S&F wall fan, 400 mm sweep, 230/240 Volt, single phase, 50 watt, 1350 rpm, air delivery not less than 65 CMM, oscillating type, double string operated, 3 speed push button control, to be fitted on wall with necessary arrangements incl connection complete all as specified & directed.(Make : BAJAJ Model ESTEEM, Code No : 250542 or equivalent in Havells/Crompton) |
| 65 | S&F ceiling rose, 65 x 50 mm surface type with 3 terminals incl connection complete all as specified and as directed. |
| 66 | S&F energy saving LED flood light fitting, envioronmental friendly, long life, die cast aluminium IP 66 comprising with electronic driver and all accessories, pre-wired, fitting to be fitted on wall / pole with necessary fixing arrangement with nut, bolts, washers etc as required/directed at site incl connection complete all as specified & directed for the following:- |
| 67 | 80 watts |
| 68 | 100 watt |
| 69 | S&F surface/ceiling recessed mounted LED panel type of size 2 ft x 2 ft, 36 W, 230 V complete with driver full window glarefree opal diffuser LED panel with CRCA powder coated white housing complete with all accessories complete all as specified & directed |
| 70 | S&F on surface/wall mounted LED batten, robust extruded aluminium housing and initigarated electronic drive 20 watt, 4 feet, with accessories including connection with 2 core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & directed |
| 71 | S&F Sheet metal enclosure DB, single pole and neutral with 200 Amps rated bus bar, 230 volts, glazed, double door type, IP-43, including connecting all connections of wire to MCBs with proper lugs complete for the following No of ways :- |
| 72 | 4 way |
| 73 | 8 way |
| 74 | S&F MCB SPN, 240 Volts, AC, breaking capacity 10 KA, 'C' curve and connection by complete all as specified & directed of following ratings:- |
| 75 | 32 amps |
| 76 | 63 amps |
| 77 | S&F MCB SP, 6 to 32 amps, 240 Volts, AC of breaking capacity 10 KA, 'B' curve and connections by using suitable copper lugs complete all as specified & directed |
| 78 | M&L for sub main wiring with 6 Sqmm nominal cross sectional area, two single core, 1100 volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable with and including continuous earth wire of size 6 Sqmm nominal cross sectional area, single core, 1100 volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable drawing into and including rigid non-metallic PVC concealed conduit not less than of 20mm dia, medium grade with all conduit accessories and connected to common earth dolly with suitable copper lugs including all cutting/chases etc in masonary/ walls complete all specified & directed .(Note : One run of earth continuity conductor, one run of PVC Conduit and two runs of copper conductor together shall be taken as one length for measuring unit length) |
| 79 | All as per Sl Item no 68.00 here-in-before but for 02 x 4.0 Sqmm for phase & neutral and 01 x 4.0 Sqmm for continuous earth wire in 20 mm PVC conduit |
| 80 | Supply and laying or fixing/passing through pipe, 1100 V grade, heavy duty cable with XLPE insulated aluminium conductor size 10 sqmm 2 core, served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed complete all as specified & directed |
| 81 | M&L for Earthing complete with galvanised steel earth plate electrode 60x60cmx6mm thick, buried directly in ground, Putting of adequate qty of salt and Char coal in layer by layer by completely covering of earth plate on sourrounding six sides, ( earth pit not less than 2.25mtrs deep below ground level) with top edge of the plate not less than 1.5mtrs below normal ground level, connected to galvanised earth lead wire 4.00 mm dia as earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point, provision of PCC earth chamber, Chamber cover, GI funnel with mesh, GI Pipe etc all as specified and directed. Note- The unit rate shall includes main earthing lead GI earth strip of size 4 mm dia with 40 mm dia GI light grade earth lead protection pipe from earth electrode to test point up to 7.5 mtr. Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |