|
| 1 | Taking down/ out carefully copper/aluminium point wiring for light/fan/bell/ sockets 5/15 Amps complete without accessories as switches,Sockets, holders,ceiling roses,light fitting regulators etc ( to be measured separately) and making good the disturbed surface all as directed. |
| 2 | M&L for point wiring with single core fire retardant low smoke PVC insulated, unsheathed multi stranded copper conductor of size 1.5 sqmm alongwith 1.5 sqmm earth wire of multi strand copper conductor (with same specification) connected to common earth dolly and drawing through existing surface/concealed conduit pipe and in existing MS box/modular box covered with existing hylem sheet / modular plate (top cover) for mounting switches, sockets or fan regulators etc for the following :- |
| 3 | One light point/ fan point/ bell point controlled by one switch |
| 4 | One socket outlet 5 Amps controlled by one switch on same board |
| 5 | One socket outlet 5 amps controlled by one switch on independent board |
| 6 | One light point controlled by two 2 way switches |
| 7 | Description all as per item No. 2.00 here in before but wiring with 4 sqmm copper wire and 4 sqmm earth wire for socket out let on independent board. |
| 8 | S&F in repair switch piano flush type, 6 amps one way,SP,230 volts AC all as directed. |
| 9 | S&F in repair switch piano flush type, 6 amps two way,SP,230 volts AC all as directed. |
| 10 | S&F in repair switch piano flush type, 16 amps one way,SP,230 volts AC all as directed. |
| 11 | S&F in repair switch piano bell push flush type, 6 amps one way,SP,230 volts AC all as directed. |
| 12 | S&F in repair socket outlet 6 amps 5 pin , all as directed. |
| 13 | S&F in repair socket outlet 6&16 amps 6 pin all as directed. |
| 14 | S&F in repair piano type Step fan regulator, 70/120 watts single/ double module all as directed. |
| 15 | S&F in repair modular switch flush type, 6 amps one way,SP,230 volts AC all as directed. |
| 16 | S&F in repair modular switch flush type, 6 amps two way,SP,230 volts AC all as directed. |
| 17 | S&F in repair modular switch flush type, 16 amps one way,SP,230 volts AC all as directed. |
| 18 | S&F in repair modular switch bell push flush type, 6 amps one way,SP,230 volts AC all as directed. |
| 19 | S&F in repair modular socket outlet 6 amps 5 pin 2 module all as directed. |
| 20 | S&F in repair modular socket outlet 6 & 16 amps 6 pin multipurpose combined 2 module all as directed. |
| 21 | S&F in repair modular Step Fan regulator, 70/120 watts single / double module all as directed. |
| 22 | S&F in repair Modular white cover plate with frame 1 module all as directed |
| 23 | S&F in repair Modular white cover plate with frame 2 module all as directed |
| 24 | S&F in repair Modular white cover plate with frame 3 module all as directed |
| 25 | S&F in repair Modular white cover plate with frame 4 module all as directed |
| 26 | S&F in repair Modular white cover plate with frame 6 module all as directed |
| 27 | S&F in repair Modular white cover plate with frame 12 module all as directed |
| 28 | S&F in repair Modular white cover plate with frame 18 module all as directed |
| 29 | S&F in repair Modular Metal Flush Box 1/2 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed |
| 30 | S&F in repair Modular Metal Flush Box 3 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed |
| 31 | S&F in repair Modular Metal Flush Box 4 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed |
| 32 | S&F in repair Modular Metal Flush Box 6 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed |
| 33 | S&F in repair Modular Metal Flush Box 12 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed |
| 34 | S&F in repair Modular Metal Flush Box 18 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface complete all as specified and as directed |
| 35 | Supply and fixing in replacement of lamp holder/ Brass Holder PVC/ Polycarbonate type insulated body with back plate suitable for batten fittings complete all as specifed and as directed. |
| 36 | Supply and fixing in replacement of Ceiling rose, insulated body, 3 terminal, 240 volts complete all as specified and as directed. |
| 37 | Supply and fixing in replacement of electric bell of DINGDONG type, 6 Amps, 240 volts, single pole and making all necessary connections complete all as directed. |
| 38 | Supply and fixing in replacement of wall light fitting suitable for LED lamp complete all as directed.Make - Phillips Glow/Trumpet or equivalent in Crompton/ Bajaj/ Havells Eveready |
| 39 | Supply and fixing in replacement of wall light fitting suitable for LED lamp complete all as directed.Make - Phillips Marvel or equivalent in Crompton/ Bajaj/ Havells/ Eveready |
| 40 | Supply and fixing in replacement of wall light fitting suitable for LED lamp complete all as directed.Make - Phillips Svelte or equivalent in Crompton/ Bajaj/ Havells/ Eveready |
| 41 | Supply and fixing in replacement of LED bed side light, 3 Watts, wall mounted type and making all electric connections complete all as specified and directed. Make - Phillips/ Crompton/ Bajaj/ Havells/ Eveready |
| 42 | S & F in replacement LED energy efficient integrated Alimunium battens fittings, PVC extruded heat sink with shatter proof opal shell of polycarbonate compound, 20 Watts, cool/warm white as per site requirement complete all as specified and directed.Make - Phillips/ Crompton/ Bajaj/ Havells/ Eveready |
| 43 | S & F in replacement of LED energy efficient integrated Alimunium battens fittings, PVC extruded heat sink with shatter proof opal shell of polycarbonate compound, 10 Watts, cool/warm white as per site requirement complete all as specified and directed.Make - Phillips/ Crompton/ Bajaj/ Havells/ Eveready |
| 44 | S&F in replacement of bulk head fitting 10/12 W with PMMA diffuser complete all as specified and directed. |
| 45 | Supply and fixing in replacement of LED ceiling light fitting 15 watt, in round shape, surface/recess type cool/warm white with inbuilt driver as per site requirement and making all electric connections complete all as directed. Make - Phillips/ Crompton/ Bajaj/ Havells/ Eveready |
| 46 | Supply and fixing in replacement of LED ceiling light fitting 10 watt, in round shape, surface/recess type cool/warm white with inbuilt driver as per site requirement and making all electric connections complete all as directed.Make - Phillips/ Crompton/ Bajaj/ Havells/ Eveready |
| 47 | Supply and fixing in replacement of LED ceiling light fitting 6 watt, in round shape, surface/recess type cool/warm white with inbuilt driver as per site requirement and making all electric connections complete all as directed. Make - Phillips/ Crompton/ Bajaj/ Havells/ Eveready |
| 48 | S & F in replacement of energy efficient LED fittings 45W LED suitable for building security light pressure die cast aluminium roadway luminaire with high power LEDs and HF electronic driver complete all as directed.Make - Phillips/ Crompton/ Bajaj/ Havells/ Eveready |
| 49 | Supply and fixing in replacement of street light fitting bracket, 1.0 mtr long made out of galvanized iron pipe of 25 mm dia size light grade complete with nut, bolts, washer, clamps etc inclusive of one primer coat, one under coat and one finishing coat of silver paint complete all as directed. |
| 50 | Supply and fixing Flexible LED strip light tubular type, any colour , incl LED AC to DC adopter and making all electric connections complete all as directed.Make - Phillips/ Crompton/ Bajaj/ Havells/ Eveready |
| 51 | Supply and fixing AC to DC adaptor for LED strip light tubular type complete all as specfied and as directed |
| 52 | Supply only PVC insulated unsheathed single core multistranded copper conductor wire of size 1.5 sqmm, 1100 volts grade cable, FRLSMake : Polycab/Havells/Finolex/RR Kabel |
| 53 | Supply only PVC insulated unsheathed single core multistranded copper conductor wire of size 2.5 sqmm, 1100 volts grade cable, FRLSMake : Polycab/Havells/Finolex/RR Kabel |
| 54 | S & F in replacement of twin twisted flexible, PVC insulated, unsheathed, multistranded copper conductor wire of size 23/0.0076, complete all as directed.Make : Polycab/Havells/Finolex/RR Kabel |
| 55 | S&F in replacement of Recess/Surface mounting 2'x2' square flat panel ultra slim scoop LED light 36 W warm/cool white with driver/transformer etc suitable for Grid ceiling/Gypsum board/POP ceiling incl making electric connection complete as as directed.Make - Phillips/ Crompton/ Bajaj/ Havells/ Eveready |
| 56 | S&F in replacement of electronic driver 36/40W suitable for 2'x2' Led ceiling Lights complete all as specified and as directed. |
| 57 | Supply and fixing in replacement of light fitting comprising of milky white PVC globe dia 200 mm and gallary suitable for mounting on 32/40 mm GI pipe suitable for LED lamp and B22 base including necessary electric connections complete all as specified and as directed. |
| 58 | Supply and fixing in replacement of LED post top lantern fitting powder coated aluminium die cast and spun aluminium with clear/opal diffuser 25 Watt incl LED driver with gallary suitable for mounting on 32/40 mm GI pipe including necessary electric connections complete all as directed. |
| 59 | S & F in replacement of LED Bollard Fittings 10W suitable for pathway lights incl making electric connections complete all as specified and directed. |
| 60 | Material and labour for replacement of submain wiring complete with 2 x 4.0 sqmm (nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 4 sqmm( same specification ) as earth wire in existing PVC conduit complete all as directed. |
| 61 | Material and labour for replacement of submain wiring complete with 2 x 6.0 sqmm (nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 6 sqmm( same specification ) as earth wire in existing PVC conduit complete all as directed. |
| 62 | Material and labour for replacement of submain wiring complete with 2 x 10.0 sqmm (nominal area) FRLS, PVC insulated, unsheathed and multistranded copper conductor cable ISI marked, and 1 x 10 sqmm( same specification ) as earth wire in existing PVC conduit complete all as directed. |
| 63 | Supply and fixing in replacement of MCB C Curve type, 10 kA, 10 to 32 Amp, Single Pole with over load and short circuit protection complete all as directed.Make - Indoasian Optipro or equivalent in Havells Lauritz Knudsenn/ Legrand/ Schneider |
| 64 | Supply and fixing in replacement SPN 32/40 A including connections complete all as specified.Make - Indoasian Optipro or equivalent in Havells Lauritz Knudsenn/ Legrand/ Schneider |
| 65 | Supply and fixing in replacement SPN 63 A including connections complete all as specified.Make - Indoasian Optipro or equivalent in Havells Lauritz Knudsenn/ Legrand/ Schneider |
| 66 | Supply and fixing in replacement TPN 40 A including connections complete all as specified.Make - Indoasian Optipro or equivalent in Havells Lauritz Knudsenn/ Legrand/ Schneider |
| 67 | Supply and fixing in replacement TPN 63 A including connections complete all as specified.Make - Indoasian Optipro or equivalent in Havells Lauritz Knudsenn/ Legrand/ Schneider |
| 68 | Supply and fixing in replacement of Modular AC 25 Amps SP mini MCB, 230 Volts, 50Hz for module sheet complete all as specified and as directed. |
| 69 | S&F of MCB DB conforming to IP 43 - IK 09 with double door, SPN 08 way, double door complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces.Make - Indoasian Optipro or equivalent in Havells Lauritz Knudsenn/ Legrand/ Schneider |
| 70 | S&F of MCB DB conforming to IP 43 - IK 09 with single door, SPN 04 way, double door complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces.Make - Indoasian Optipro or equivalent in Havells Lauritz Knudsenn/ Legrand/ Schneider |
| 71 | Supply and fixing in replacement of MCCB incommer Distribution Board ( Vertical Load line DB) double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, VTPN 04 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCCB as incommer and MCB as outgoing and making all necessary connections and taking out the old unserviceable DB complete all as directed.Make - Indoasian Optipro or equivalent in Havells Lauritz Knudsenn/ Legrand/ Schneider |
| 72 | S&F in replacement of TPN DB 04 way double door confirming to IP43 & IK 09 protection complete with din rail, Neutral and Earthing bar after taking out the old unserviceable DBs, connection complete and making good the disturbed surfaces.Make - Indoasian Optipro or equivalent in Havells Lauritz Knudsenn/ Legrand/ Schneider |
| 73 | S & F in replacement of MCCB, 415 volts, three pole of cap 100/125 Amps, 10 KA, ICS = 100% ICU, with Thermal - Magnetic Release, including necessary spreader / thimbles of suitable size and making connections complete all as directed.Make - Indoasian Optipro or equivalent in Havells Lauritz Knudsenn/ Legrand/ Schneider |
| 74 | Description all as per item No.68.00 here in before but of capacity 160 Amps, 25 KA. |
| 75 | Description all as per item No. 68.00 here in before but of capacity 200 Amps, 25 KA. |
| 76 | Supply and fixing of PVC casing & caping ( ISI marked) 20 mm width double lock type inclusive of all fittings such as tees, bends, elbow, etc and all fixing accessories complete all as directed. |
| 77 | Supply and fixing of PVC casing & caping ( ISI marked) 25 mm width double lock type inclusive of all fittings such as tees, bends, elbow, etc and all fixing accessories complete all as directed. |
| 78 | S&F in replacement of rigid non metallic PVC conduit 20 mm dia inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc complete for surface mounted / concealed including cutting chases in wall and making good the surface all as specified and and as directed. |
| 79 | S&F in replacement of rigid non metallic PVC conduit 25 mm dia inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc complete for surface mounted / concealed including cutting chases in wall and making good the surface all as specified and and as directed. |
| 80 | S&F in replacement of BLDC ventilating fan made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 20W, 50 Hz, >930 CMH, 1300 RPM, copper winding of sweep 250mm as per IS 2312:1967 + Amd and making all electric connections complete all as directed. |
| 81 | Supply and fixing in replacement of Wall Mounted BLDC Fan 400 mm sweep plastic body type including making all electric connections and depositing the old u/s to MES store yard complete all as directed. |
| 82 | S&F in replacement BLDC (Brushless Direct Current) Ceiling Fan ( energy efficient), 1400 mm with IR Remote controlled, Rated Voltage 230V (I/p voltage range 145-285 VAC), 50 Hz, 28W, Min air delivery 270 cmm, 290 RPM,PF>=0.95, THD<=10%, Surge Protection upto 6kV, 4 rivet, Tempr rise <65 degree C, Insulation class 'F', IR>2 Mega ohm, Five star rating with service value 7.7 BEE, conforming to IS 374:2019 having full copper motor winding & ribbed 3 Nos A/M blades making necessary electric connection of suitable PVC copper wire from ceiling rose to ceiling fan complete all as specified and directed.Note : Old fan shall be deposited to MES Store. |
| 83 | Supply and fixing BLDC exhaust fan 300 mm sweep metalic body type and making all electric connections complete all as directed and depositing the old U/s item to MES store yard. |
| 84 | M&L for rewinding of exhaust fan(300mm)/wall mounting fan(400mm) with super enamelled copper wire of required size duly varnishing including greasing/oiling and commissioning/ testing to the entire satisfaction of Engineer-in-charge. |
| 85 | M&L for rewinding of Ceiling fan 1200/1400mm sweep with super enamelled copper wire of required size duly varnishing including greasing/oiling and commissioning/testing to the entire satisfaction of Engineer-in-charge. |
| 86 | S & F in replacement plastic body capacitor of capacity 2.5 MFD with wire suitable for single phase motor and making connection complete all as specified and directed |
| 87 | Description all as per Srl item No 81.00 above but 3.15 MFD capacity. |
| 88 | Description all as per Srl item No. 81.00 above but 4.0 MFD capacity. |
| 89 | S&F in replacement of ball bearing No 6201/6202 suitable for ceiling fan complete all as specified and directed. |
| 90 | M & L for ceiling fan down rod fabricated out of MS pipe medium grade 15 mm dia cut to length as per site requirement duly painted white with synthetic enamel paint over a coat of red oxide primer having through hole and cut of suitable size at both end for fixing ceiling fan and clamp etc complete all as specified and as directed |
| 91 | S&F MS clamp with rubber real including nut, bolt and split suitable for ceiling fan to hook complete all as specified and as directed. |
| 92 | S&F PVC Gang Box suitable for one No 5 Amps Switch and one No 5 Amps Socket complete all as specified and as directed. Make : Presto plast/Pressfit/Polyplast. |
| 93 | S&F PVC Gang Box suitable for two No 5 Amps Switch and two No 5 Amps Socket complete all as specified and as directed. Make : Presto plast/Pressfit/Polyplast. |
| 94 | S&F PVC Gang Box suitable for one No 15 Amps Switch and one No 15 Amps Socket complete all as specified and as directed. Make : Presto plast/Pressfit/Polyplast. |
| 95 | S & F in replacement of plug top 3 pin 10/20 amp earth metal clad suitable for industrial type DB complete all as directed. |
| 96 | S & F in replacement of socket 3 pin 10/20 amp earth metal clad suitable for industrial type DB complete all as directed. |
| 97 | Supply and fixing in replacement of 'T' cover Bakelite sheet 2 mm thick in round shape complete all as specified. |
| 98 | Supply and fixing in replacement of Bakelite sheet 3mm thick of size 5\\"x5\\" duly wire cut for switches, sockets, regulator etc as per site requirement as directed. |
| 99 | S&F in replacement of Bakelite sheet 3mm thick of size 8\\"x5\\" duly wire cut for switches, sockets, regulator etc as per site requirement as directed. |
| 100 | S&F in replacement of Bakelite sheet 3mm thick of size 8\\"x10\\"duly wire cut for switches, sockets, regulator etc as per site requirement all as directed. |
| 101 | S&F in replacement of Bakelite sheet 3mm thick of size 10\\"x12\\" duly wire cut for switches, sockets, regulator etc as per site requirement all as directed. |
| 102 | Taking down old unserviceable LT U/G cable any size and core complete all as specified. |
| 103 | S&F XLPE insulated armoured heavy duty U/G aluminium conductor cable served with an inner sheathing of PVC tape armoured with galvanised steel strip wire or tape and overall PVC sheathed of size 10 Sqmm 2 core. Make:Polycab/Gloster/Havells/Plaza/Finolex. |
| 104 | Description all as per item sl No 98.00 but 25 sqmm, 4 core. |
| 105 | Description all as per item sl No 98.00 but 50 sqmm, 3 1/2 core. |
| 106 | Excavation in trenches in soft / loose soil not exceeding 1.5 meter depth and not exceeding 1.5 meter wide and getting out including trimming of sides complete all as directed. |
| 107 | Material and labour for brick protection to cable using old size class 'B' bricks, laid flat, dry butt jointed, laid lengthwise perpendicular to the axis of cable complete all as directed. |
| 108 | Material and labour for sand cushioning with a layer of fine sand 8 cm thick before laying the cable and 15 cm after laying the cable in trenches to cover under ground cable complete all as directed. |
| 109 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as directed. |
| 110 | Removal of excavated material not exc 50m and depositing not exc 1.5m above starting point complete all as specified and as directed.. |
| 111 | S&F in replacement of Galvanised Steel tubing light grade of size 50mm bore under floor/road etc complete all as specified and as directed. |
| 112 | Supply and fixing in replacement of Geyser 25 ltre capacity vertical type with steel tank and glass inner linen , 5 star rating, minimum 8 bar withstanding pressure complete including taking down the old u/s geyser and depositing to MES store yard complete all as specifed and directed. Please Enable Macros to View BoQ information |
| 113 | Supply and fixing in replacement of Geyser 25 ltre capacity vertical type with steel tank and glass inner linen , 5 star rating, minimum 8 bar withstanding pressure complete including taking down the old u/s geyser and depositing to MES store yard complete all as specifed and directed. Please Enable Macros to View BoQ information |