|
| 1 | Item No.1 Providing, supplying and commissioning of 500 LPH REVERSE OSMOSIS system with Drinking Water Automatic Dispensing Machine With One Years Warantity |
| 2 | Item No.2 Providing, supplying and Installation of Spares Water Tank Stainless Steel Grade 304 For R.O.SystemWater Tank capacity 1000 Liters With Stand ( Raw Water Tank ) |
| 3 | Item No.3 Providing and fixing H.D.P container one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet over flow pipe inclusive of all tanks capacity between 200 to 1000 liters |
| 4 | Item No.4 Chiller 2 Tonn Capacity |
| 5 | Item No. 5 Shed For RO Excavation for foundation in earth soils of all types sand gravel and soft murum including removing the excavated material up to a distance of 50 M beyond the building area and stacking and spreading as directed as directed dewatering preparing the bed for foundation and necessary back filling ramming watering including shoring and strutting etc complete lift up to 1.50M(Mechanical Means) |
| 6 | Item No. 3 Providing and laying in situ cement concrete in M.10 of trap metal for foundation and bedding including bailing outwait formwork compacting and curing with natural sand etc complete. |
| 7 | Item No.4 Shed For RO Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water, striking joints on unexposed faces, raking out joints on exposed faces and watering Complete |
| 8 | Item No.5 Shed For RO Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete. |
| 9 | Item No.7 Providing and fabricating structural steel work enrolled sections like joints channel s angles ,tees etc as per detailed design and drawings including fixing in position without connecting plates, braces,etc and one coat of anti corrosive paint and over it two coats of oil painting of approved quality and shade etc. |
| 10 | Item No.8 Shed For RO Providing and fixing plane zinc sheeting of 0.80 mm thick (22BWG) over the ridge hip or valley to galvanized iron sheet roofing including all fastening and boit, galvanized iron screw and bolt and lead and bitumen washers complete(Wt 6.8kg/sqm) |
| 11 | Item No.9 Shed For RO Providing and fixing rolling shutter fabricated from steellaths of minimum thickness 0.9 mm with lockplate of 3.15mm thickness reinforced with 35x3x5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S.channel section of depth and thickness not less than 65mm and 3.15mm respectively with hold fast arrangements, M.S.Bracket plate 300x300x3.15mm minimum size and shape with square bar, suspensions haft of minimum 32 mm diameter, hood cover of M.S.sheet not less than 0.9mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear weels and worms of high grade cast iron or mild steel and one coat of red lead primer etc.complete. (I.S. 62481979) (Without mechanical gear) |
| 12 | Item No.9 Providing and fixing on walls/ceiling/floor 25mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc.complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 13 | Item No.10 Electrification For RO Plant Point wiring in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, flush type switch, earthing and required accessories as per specification No: WG-PW/SW |
| 14 | Item No.11 Electrification For RO Plant Wiring for plug on board with Switch socket, copper wiring and earthing as per specification No: WG-PW/SW |
| 15 | Item No.12 Electrification For RO Plant Supplying, erecting & marking DPMCB 6A to 32A,C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board |
| 16 | Item No.13 Electrification For RO Plant Supplying & erecting mains with 2x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG- MA/BW |
| 17 | Item No.15 Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‘E’ class insulation. |
| 18 | Add 18% GST Please Enable Macros to View BoQ information |