|
| 1 | CIVIL WORKS |
| 2 | INTAKE WELL AT KABRAI DAM |
| 3 | Construction of Intake Well (Combined for Mahoba NPP & Kabrai NP) of 10.00M Dia & 27.00 M Height with required length & 3.5 M width foot bridge (All Civil Works of Intake Well have been proposed in Madaha NPP Re-organisation Water Supply Scheme.) Note:-Cost Already have been taken in Mahoba DPR |
| 4 | WTP works |
| 5 | Survey, Investigation, Soil Testing, Planning, Design and Drawing,construction, commissioning etc. as per design and drawing provided by the contractor all in accordance with the relevant latest I.S. Codes and approved by the Engineer as per conditions of the bid documents. The design and drawings provided by the contractor should be Vetted by any IIT Institute or Government Engineering College approved by the Engineer on contractor's cost. For construction of 5.0 MLD WTP on latest technology, Admin Building with Command Control Room, and fire fighting arrangements, first aid arrangements Cascade Aerator, Inlet chamber, Alum dosing, Pre-Sedimentation Tank/Rapid Mix/Vertical Flow Clarifloculator/Rapid Gravity Filter with Back Wash Arrangement/Proper Sludge Disposal and Backwash water disposal arrangements to nearest drain/low laying area & Appurtenant Works of the above-mentioned capacity, automated through PLC with outputs to SCADA, walkway in between WTP components with railing, Guard Room, Chemical Store House, Gaseous Chlorination Plant, Development of WTP area with adequate plantation, Rainwater harvesting unit. Lean concrete to be used of grade not less than M-15 and other structures in minimum M-30 grade of concrete. Cement and steel should be as per approved by the Engineer/IS code. Collapsible MS steel doors and aluminum windows to be provided including of three-coat Plastic Paint, internal two coat Water Proof Apex painting, external painting with water proof apex ultima/equivalent paint, all steelwork must be painted with red oxide paint and two coat of anticorrosive paint etc. and internal and external electrification with adequate LED lights for the compound, including automation, instrumentation & SCADA, wireless telemetry (voice & data), including Water Testing Kits, Lab Building and essential lab equipment as mentioned in the related Items Including of supply of all materials, labor T&P etc required for proper completion of works as per direction of the Engineer. Supply of all materials, labour, T&P etc, and construct an RCC MCWR of 400 KL required size of RCC Framed Pump House adjacent to CWR as per approved design,drawing and standard specifications with RCC column,Bracket and Longitudinal RCC Beam to Support moving gantry crane and appurtenant works such as fixing of MS Ladder inside the tank, 1m wide balcony,20mm dia G.I. Pipe railing in three rows and angle iron posts around the balcony and at the dome periphery, i.e. supply and fixing M.H.cover with locking device, ventilator; lightening conductor, water level indicator, fixing of puddle collars and bell mouths, supply and fixing M.S. clamps with RCC coloumn, 25 mm thick PCC 1:2:4 floor over 80 mm PCC 1:4:8 in appron, 150 mm semicircular drain around the tank, escape channel of 20m length,staircase having locking arrangements, two coats of apex ultima paint,painting of pipes and railing with approved synthatic enamel paint and testing of tank for water tightness etc. and also including the cost of supply and fixing of all necessary inlet,outlet,overflow and wash out CI /DI/D/F pipes of required sizes beyond apron with all required specials,sluice valves,S.V. Chambers etc. all complete including site clearance and other unforeseen items. All works complete as per design and drawing approved by engineer incharge. contractor will have to provide four wheelers, two wheelers, with fuel & driver for supervision of work and computer/laptop with operator as mentioned in tender document. |
| 6 | Rising Main & By Pass arrangement from Intake Well to WTP and WTP to Zones. Intake well have been proposed in Mahoba WSS (Kabrai Dam) under AMRUT-2.0 Programme) |
| 7 | Supply of following sizes of DI pipes, class K-9 with rubber gasket, conforming to IS: 8329/2000 (reaffirmed year 2020) or its latest amendments, F.O.R. destination including insurance etc. complete |
| 8 | 400 mm dia D.I. Class K-9 |
| 9 | 350 mm dia D.I. Class K-9 |
| 10 | Supply of Specials for above pipe F.O.R destination including all Taxes and insurance. |
| 11 | Carting of the following sizes of D.I. Pipes (class K-9) and specials to the site of work, lowering them in to trenches and laying true to alignment and gradient including testing of pipeline (but excluding cost of trenching and cuttling of pipes etc. for making of lengths but including making joints). All NOC clearance related Work of Rising Mains to be done by contractor (NHAI,PWD,Forest,Railway,etc.) at his own cost,only correspondance work from concerning Deppt. will be done by Department. |
| 12 | 400 mm dia D.I. Class K-9 |
| 13 | 350 mm dia D.I. Class K-9 |
| 14 | Excavation for pipeline trenches in Soil ,mixed with Mooram/Shingle/kankar or sand including lift upto 1.5 m and lead upto 50 m and refilling, watering, ramming of excavated, earth in to the trenches and disposal of surplus earth upto 50 m from the center of the trenches |
| 15 | In soil mixed with moorum/ shingle/ kankar/rock |
| 16 | Dismantling of following type of road surfaces for lying of pipe line including sorting out of serviceable materials and disposal of unserviceable materials. |
| 17 | Bituminous Road |
| 18 | C.C. Road |
| 19 | Reinstatement of following type of road surfaces for lying of pipe line including sorting out of serviceable materials and disposal of unserviceable materials. |
| 20 | Bituminous Road |
| 21 | C.C. Road |
| 22 | Supply of all materials, labour, and T & P etc. and construct R.C.C. thrust blocks in R.C.C. work in 1:1.5:3 |
| 23 | Distribution System |
| 24 | Supply of the following D.I. pipes (K-7) conforming to 1.8 -8329/2000 (reaffirmed year 2020) or its latest amendment(s). Including F.O.R. destinations rate per metre in Rs., anywhere in U.P. including cost of one Rubber Gasket per pipe length & inclusive of Third Party Inspection Charges, Packing & Forwarding Charges, Transit Insurance Charges, Road Transportation Charges etc. |
| 25 | 450 mm dia D.I. Class K-7 |
| 26 | 400 mm dia D.I. Class K-7 |
| 27 | 350 mm dia D.I. Class K-7 |
| 28 | 300 mm dia D.I. Class K-7 |
| 29 | 250 mm dia D.I. Class K-7 |
| 30 | 200 mm dia D.I. Class K-7 |
| 31 | Supply of Specials for above pipe F.O.R destination including all Taxes and insurance. |
| 32 | Supply of the following HDPE Pipes as per I.S. 4984/2016 or its latest amendment inclusive of 3rd party inspection charges, packing and forwarding charges, trasnit insurance charges, road transportation charges etc. F.O.R. destination etc. complete. |
| 33 | HDPE Pipe PN 6: class PE 100 |
| 34 | 90 mm dia |
| 35 | 110 mm dia |
| 36 | 140 mm dia |
| 37 | 160 mm dia |
| 38 | Supply of Specials for above pipe F.O.R destination including all Taxes and insurance. |
| 39 | Excavation for pipe line trenches in Ordinary soil,(lime, clay or sand Including lift up to 1.5m and lead up To 50m and refilling, watering, Ramming of excavated earth in to trenches and disposal of surplus earth up to 50 m from the center of the foundation trenches. |
| 40 | In soil mixed with moorum/ shingle/ kankar/rock |
| 41 | Carting of following pipes, specials and fittings to site of work, lowering them into trenches, laying true to alignment and gradient, laying and jointing of pipe line by Electro-Fusion Method (HDPE Pipes) including cutting of pipe for making up lengths as required for proper completion of work.All NOC clearance related Work of Distribution System to be done by contractor (NHAI,PWD,Forest,Railway,etc.) at his own cost,only correspondance work from concerning Deppt. will be done by Department. |
| 42 | HDPE Pipe PN 6: class PE 100 |
| 43 | 90 mm dia |
| 44 | 110 mm dia |
| 45 | 140 mm dia |
| 46 | 160 mm dia |
| 47 | DI Pipe K-7 |
| 48 | 200 mm dia |
| 49 | 250 mm dia |
| 50 | 300 mm dia |
| 51 | 350 mm dia |
| 52 | 400 mm dia |
| 53 | 450 mm dia |
| 54 | Supply & fixing of following sizes of C.I. Double flanged sluice valves as per IS 14846: 2000 (Reaffirmed Year: 2020) or its lastest amendment, class - 1 F.O.R. destination including insurance. |
| 55 | Sluice Valves |
| 56 | 450 mm dia |
| 57 | 400 mm dia |
| 58 | 350 mm dia |
| 59 | 300 mm dia |
| 60 | 250 mm dia |
| 61 | 200 mm dia |
| 62 | 150 mm dia |
| 63 | 100 mm dia |
| 64 | Scour Valves |
| 65 | 80 mm dia |
| 66 | Air Valves |
| 67 | 20 mm dia |
| 68 | Fire Hydrants |
| 69 | 80 mm dia |
| 70 | Carting of following CI Sluice valve, specials and fittings to site of work, lowering them into already prepared trenches, fixing them in position including supply of all jointing materials such as bolt,Rubber insertion white lead complete etc. required for proper completion of work |
| 71 | 450 mm dia |
| 72 | 400 mm dia |
| 73 | 350 mm dia |
| 74 | 300 mm dia |
| 75 | 250 mm dia |
| 76 | 200 mm dia |
| 77 | 150 mm dia |
| 78 | 100 mm dia |
| 79 | Scour Valves |
| 80 | 80 mm dia |
| 81 | Air Valves |
| 82 | 20 mm dia |
| 83 | Fire Hydrants |
| 84 | 80 mm dia |
| 85 | Supply construction of following chambers as per type design including supply and materials labour, T&P etc. complete. |
| 86 | Surface Box Type (550*550*1000) |
| 87 | Masonry Type (1000*1000*1000) |
| 88 | Air Valves (950*950*1000) |
| 89 | Fire Hydrants (1860*1660*1000) |
| 90 | Dismantling of following type of surface including sorting out and staking of serviceable materials and disposal of unserviceable material up to a distance of 50m. |
| 91 | B.O.E. Road |
| 92 | Bituminous Road |
| 93 | CC Road |
| 94 | Inter locking Road |
| 95 | Reinstatment of following type of road including supply of all material, labour etc complete. All works complete as per design and drawing approved by engineer incharge |
| 96 | B.O.E. Road |
| 97 | Bituminous Road |
| 98 | CC Road |
| 99 | Inter locking Road |
| 100 | Crossing of Nala for laying pipe line including necessary CI/DI Casing specials,T&P,arrangement of diversion of water,baricating requiredwith dismantling of drains and reconstruction of same as per type design of the existing drains. |
| 101 | 0-3.5 M |
| 102 | 3.5-7.0 M |
| 103 | 3.5 M Culvert Crossing |
| 104 | Repairing of Drains/Public ramp/other miscellaneous structures which are coming in alignment of pipeline and damaged during the layin g of pipeline including supply and materials labour, T&P etc. complete. |
| 105 | Brick Masonary in Cement Concrete 1:4 |
| 106 | 12 mm thick Plasterin Cement Concrete.1:4 |
| 107 | Trenchless Crossing (Supply of MS pipe As per IS:3589 made from steel confirming to IS:2062), with anti corrosive treatment with P.U. coating and Installation of product pipe by HDD method including preparing and setting up the plants and equipement, preparing new pipe work material, installation new pipe-work and commissioning system or making the system ready for commissioning by HDD operation including, all related civil and mechanical works like excavation, shoring/strutting, etc. drilling, stringing, reaming, and pulling back the new pip-work on the designed bore path alignment, proper disposal of drilling fluid, and back fill of site after completion all inclusive as per IndSTT:101:2018: Code of prectice of HDD Technique Suiting Indian Conditions.) |
| 108 | 400mm dia pipe, 6mm Pipe Wall Thickness |
| 109 | National Highway Crossing |
| 110 | House connection on New Pipeline |
| 111 | Provision of House connection including Supply of all materials, labours T&P etc required for proper completion of work. (as following) |
| 112 | Making House Connection with distribution main including dismantling-reinstatement of road, supply, carting of specials, Lowering them into trances, fixing them in proper alignment and jointing by Electro-Fusion Method including bailing out to water, necessary excavation for connection.grouting of G.I.Pipe,Refilling of earth with all labour, T&P etc. required for proper completion of the work. All works complete as per design and drawing approved by engineer incharge. |
| 113 | In B.O.E.Road |
| 114 | For 90 mm to 110 mm dia |
| 115 | For 125 mm to 160 mm dia |
| 116 | For 180 mm to 250 mm dia |
| 117 | For 300 mm dia |
| 118 | For 350 mm to 500 mm dia |
| 119 | In Bituminous Road |
| 120 | For 90 mm to 110 mm dia |
| 121 | For 125 mm to 160 mm dia |
| 122 | For 180 mm to 250 mm dia |
| 123 | For 300 mm dia |
| 124 | For 350 mm to 500 mm dia |
| 125 | In C. C. Roads |
| 126 | For 90 mm to 110 mm dia |
| 127 | For 125 mm to 160 mm dia |
| 128 | For 180 mm to 250 mm dia |
| 129 | For 300 mm dia |
| 130 | For 350 mm to 500 mm dia |
| 131 | In C. C. Interlocking tiles Roads |
| 132 | For 90 mm to 110 mm dia |
| 133 | For 125 mm to 160 mm dia |
| 134 | For 180 mm to 250 mm dia |
| 135 | For 300 mm dia |
| 136 | For 350 mm to 500 mm dia |
| 137 | In Earthen Roads |
| 138 | For 90 mm to 110 mm dia |
| 139 | For 125 mm to 160 mm dia |
| 140 | For 180 mm to 250 mm dia |
| 141 | For 300 mm dia |
| 142 | For 350 mm to 500 mm dia |
| 143 | RCC OHT |
| 144 | Supply of all materials, labour, T&P etc, and construct an RCC over head tank of following capacity with RCC staircase and 1m wide balcony, 20 mm dia G.I. Pipe railing in three rows and angle iron posts 50*50*6 mm around the balcony and at the dome periphery, M.S. ladder 50*50*8 mm angle section from the balcony to the top of tank and inside the tank, supply and fixing M.H.cover 60*60 cm of MS chanel section min. 3 mm thickness with locking device, circular ventilator 1.2 m dia with RCC cover and space b/w top dome and covered with mosquito net of standard quality along with expanded mentaled jal; lightening conductor as per ISS 2309 of latest amendments, water level indicator, fixing of puddle collars and bell mouths, supply and fixing M.S. clamps with RCC coloumn, 25 mm thick PCC 1:2:4 floor over 80 mm PCC 1:4:8 in appron, 150 mm semicircular drain around the tank, escape channel of 20m length, box type enclosure at the entrance of the staircase having locking arrangements, two coats of Apex Ultima paint and testing of tank for water tightness etc. and also including the cost of supply and fixing of all necessary CI D/F pipes inlet 350mm dia,outlet 400 mm dia,overflow 350 mm dia and washout 100 mm dia with all jointing materials and its sluice valves,chambers etc. all complete including site clearance and other unforeseen items for following zones including all Soil Testing,Design,Drawing Approval,Testing &Commissioning etc. complete.The design and drawings provided by the contractor should be Vetted by any IIT Institute or Government Engineering College approved by the Engineer on contractor's cost. |
| 145 | Zone-3 |
| 146 | 2200 KL |
| 147 | Cost for testing of Soil Bearing Capacity of soil for various sites for proposed water works. |
| 148 | STAFF QUARTER |
| 149 | Construction of Staff Quarter including all materials, labour, T&P Complete as per type design & Unit Estimate.(1 full Set with 2 Room) |
| 150 | BOUNDARY WALL, GATE SITE DEVELOPMENT & APPROACH ROAD |
| 151 | Construction of Boundary wall around water works compound including all materials, labour, T&P Complete as per type design & Unit Estimate. |
| 152 | Fixing of 3.6m wide MS gate with 1.2m wide wicket gate Including fabrication and supply of steel and construction of boundary pillars etc. all complete. |
| 153 | Supply and laying of 80mm thick Cement interlocking tiles for approach road including preparation of 100mm thick subgrade with lean concrete 1:4:8 including supply of all material, labour and T&P etc complete for proper completion of the work. |
| 154 | Provision for inside square drain including supply of all materials labour and T & P etc. complete |
| 155 | Construction of MCS Room,HT Room,LT Room & Meter Room including all materials, labour, T&P Complete as per type design & Unit Estimate. |
| 156 | MCS Room (8.0M*5.0M*4.0M) |
| 157 | H.T. Room (5.0M*4.5M*4.0M) |
| 158 | L.T. Room (5.0M*4.5M*4.0M) |
| 159 | Meter Room (4.0M*3.0M*3.0M) |
| 160 | INTAKE WELL AT KABRAI DAM |
| 161 | PUMPING PLANTS: |
| 162 | Supply, installation, testing and commissioning of Oil lubricated Vertical Turbine Raw water pump alongwith all necessary arrangements to complete with 24 m column assembly ,25 hp VHS TEFC motor B class insulation with reversible ratchet, chuck nut and top shaft locking arrangement suitable to operate on 415 volt, 3 Phase 50 HZ AC supply. (Synchronous Speed 1450 RPM) |
| 163 | 1850 LPM, 25 HP, 31 m Head, 1450 RPM ( Head ,discharge & hp may vary as per site condition) |
| 164 | SITC of 22 Kw or more as per site condition with best engineering manner digital Soft Starter with RS485 port - 400 V class for INTAKE Motors |
| 165 | Supply and laying of 3 core 35 Sq.mm. Armoured Copper Conductor Cable from Starter to respective motors with lugs etc. with all material labour t&P |
| 166 | A) MAIN PIPING- Supply of CIDF/DIDF 250 mm Main piping required for delivery side, 500 mm common Header upto 1 m outside with 3 Nos 250x150x250 mm size Tee and 1 Nos 250x150x250 mm size Tee for bye pass arrangement of the pump house along with all necessary dismantaling joints, enlarger , reducer . complete in all respect as per site conditions . ( size of delivery & common header may increase as per site condition) |
| 167 | Nut , bolt & rubber packing |
| 168 | B) VALVES- |
| 169 | a) SITC of following size motor operated actuaters with DIDF/CIDF sluice valves |
| 170 | i) 150 mm size( Size may increase as per site condition with best engineering manner) |
| 171 | ii) 250 mm size( Size may increase as per site condition with best engineering manner) |
| 172 | b) SITC of following size DIDF/CIDF Non Return Valves |
| 173 | i) 150 mm size( Size may increase as per site condition with best engineering manner) |
| 174 | ii) 250 mm size( Size may increase as per site condition with best engineering manner) |
| 175 | SITC of CE/UL Certified Electromagnetic flow meter |
| 176 | (i) Electromagnetic flow meter of size 250 mm( Size may increase as per site condition with best engineering manner) |
| 177 | ELECTRICAL ITEMS: |
| 178 | Supply & laying of 3.5 core 50 Sq.mm. Armoured Aluminum Conductor Cable From 02 nos of Transformer to LT panel with lugs etc. in 02 runs with all material,labour T&P |
| 179 | SITC of Auto Phase reversal unit / Automatic switch with inbuilt the delay & enclosure (Confirms to IEC: 60947-1 & IEC: 60947-6-1) of followint rating: |
| 180 | (i) 160 Amp or more as per site condition |
| 181 | SITC of dust and vermin proof LTcum mcc Pannel with electrically and mechanically interlocked 02 nos. incoming of 160 Amp microprocessor based MCCB for 02 nos transformer and 3 Nos. (2w+1s) 63 Amp microprocessor based MCCB for 03 nos pumping plant 02 nos 63 amp and 2 nos 32 amp outgoing MCCB Mirco processor based complete suitable to operate on 415±6 % volt , 3 phase , 50 Hz, AC supply with CT'S, PT, AVF meter, PF meter, Relays , protective device and have sufficient space for soft starters of pumping plant complete in all respect for individual motors |
| 182 | SITC of 50 kvar APFC panel suitable for above LT panel with all necessary metering and protective devices complete in all respect. |
| 183 | SITC of CE/UL Certified Pressure Transmitter for each pump and common header |
| 184 | SITC of CE/UL Certified Radar type Level Transmiter for Intake well. |
| 185 | SITC of CE/UL Certified Surge protector for control panel |
| 186 | Double Plate Earthing of complete Pumping Station (as per IER/IS) including civil works ,chamber cover and all material, separate double earthing for each equipment shall be carried outas per IER rules |
| 187 | Tools |
| 188 | 10 mm Thickness Electrical resistance sheet |
| 189 | Supply ,fabrication & fitting Cable trench Chequerred plate 6 mm thickness, angle and C Chanel etc. |
| 190 | Fire fighting equipments such as four nos. fire extinguishers CO2/ ABC type. |
| 191 | Painting of pumping plant and all other E/m equipment with all labour & T& P |
| 192 | Installation, Testing and Commissioning of all equipments and pumping plants etc complete in all respect. |
| 193 | WTP 5.0 MLD |
| 194 | EPC contract for a 5.0 MLD Water Treatment Plant at BEtwa river, including detailed design and drawings; SITC of all electro-mechanical works with latest SCADA-based automation; integration with approved civil structures; all materials, labour, and T&P; wetted-parts design subject to Engineer-in-Charge approval; adequate standby units and spares; and complete gaseous chlorination system (1W + 1S) for pre- and post-treatment with chlorine analyzers, leak detection and absorption system with full safety tools, complete in all respects. |
| 195 | PUMPING PLANTS: |
| 196 | SITC of Vertical Turbine water lubricated Clear Water Pump with 4.5 mt column assembly along withVHS,TEFC,IE-3 Electric motor complete with ratchet arragment chucknut and top shaft locking arragment with following specifications. |
| 197 | 2350 LPM, 50 HP, 60 m Head, 1450 RPM (head,discharge hp may vary as per site condition) |
| 198 | SITC of 45 Kw or more as per site condition with best enginnering manner digital Soft Starter with RS485 port - 400 V class for MCWR Motors |
| 199 | Supply and laying of 3 core 25 Sq.mm. Armoured Copper Conductor Cable from Starter to respective motors with lugs etc. in 02 runswith all material ,labour T&P |
| 200 | A) MAIN PIPING- SITC of CIDF/DIDF 200 mm Main piping required for delivery side, 300 mm common Header upto 1 m outside with 3 Nos 300x200x300 mm size Tee and 1 Nos 300x200x300 mm size Tee for bye pass arrangement of the pump house along with all necessary dismantaling joints, enlarger , reducer nuts, bolts, rubber packing etc. complete in all respect as per site conditions . ( Size may increase as per site condition with best engineering manner) |
| 201 | B) VALVES- |
| 202 | a) SITC of following size motor operated actuaters with DIDF/CIDF sluice valves |
| 203 | i) 200 mm size( Size may increase as per site condition with best engineering manner) |
| 204 | ii) 300 mm size( Size may increase as per site condition with best engineering manner) |
| 205 | b) SITC of following size DIDF /CIDF Non Return Valves |
| 206 | i) 200 mm size( Size may increase as per site condition with best engineering manner) |
| 207 | ii) 300 mm size( Size may increase as per site condition with best engineering manner) |
| 208 | SITC ofCE/UL Certified Electromagnetic flow meter |
| 209 | (i) Electromagnetic flow meter of size 300 mm for MCWR outlet( Size may increase as per site condition with best engineering manner) |
| 210 | SITC of CE/UL Certified Pressure Transmitter for each pump and common header |
| 211 | SITC of CE/UL Certified level transmitter for CCWR |
| 212 | Electrical Item |
| 213 | Supply and laying of 3.5 core 185 Sq.mm. Armoured Aluminum Conductor Cable from Transformer to Lt Panel with lugs etc. in 02 runs with all material,labour T&P |
| 214 | Supply & laying of 3.5 core 70 Sq.mm. Armoured Aluminum Conductor Cable from LT Panel to WTP Panel with lugs etc. in 02 runs with all material,labour, T&P |
| 215 | Supply & laying of 4 core 16 Sq.mm. Armoured Aluminum Conductor Cable from LT Panel to DMA,s & oht Panel with lugs etc. with all material,labour, T&P |
| 216 | SITC of Auto Phase reversal unit / Automatic switch with inbuilt the delay & enclosure (Confirms to IEC: 60947-1 & IEC: 60947-6-1) of followint rating: |
| 217 | (i) 400 Amp. Or more as per site condition |
| 218 | SITC of dust and vermin proof Lt cum MCC Panel consisting of 2 Nos incoming Mirco processor based ACB of 400 Amp( 02 for transformer ) , 3 Nos. outgoing Mirco processor based MCCB of 200 Amp for 03 nos for pumping plant ,200 amp 02 nos for WTP,02 nos 100 amp, 02 No 63 Amp MCCB Mirco processor and 04 nos 32 amp MCCB microprossor based for Lighting /Spare complete or suitable capacity to operate on 415±10 % volt , 3 phase , 50 Hz, AC supply with power wiring, Ampere meter, Voltmeter ,CT'S, PT, AVF meter, PF meter, Relays, protective device and have sufficient space for soft starters of pumping plant complete in all respect. etc. wiring, CT'S, PT, AVF meter, PF meter, Relays and protective device , Ampere meter, Voltmeter etccomplete in all respect. |
| 219 | SITC of CE/UL Certified Surge protector for control panel |
| 220 | SITC of 75 kvar APFC panel suitable for above LT panel with all necessary metering and protective devices complete in all respect. |
| 221 | SITC of CE/UL Certified Radar type Level Transmiter for MCWR |
| 222 | Double Plate Earthing of complete Pumping Station (as per IER/IS) including civil works ,chamber cover and all material, separate double earthing for each equipment shall be carried outas per IER rules |
| 223 | SITC of 3Ton capacity hand operated overhead travelling (HOT) crane suitable for span up to 6 mtrs and travelling length upto 10 mtrs with clear lift up to 6 mtrs including gear type chain pulley block and geared travelling trolley complete with all accessories including girder. |
| 224 | 10 mm Thickness Electrical resistance sheet |
| 225 | Tools |
| 226 | Supply ,fabrication & fitting Cable trench Chequerred plate 6 mm thickness, angle and C Chanel etc. |
| 227 | S/Fof Fire fighting equipments with proper arrangement with best engineering manner such as four nos. fire extinguishers CO2/ ABC type . |
| 228 | Internal & External electrification and lighting (illumination) of pumping station.with campus lightining as per instruction of engineer incharge .Cost of all electromechanical items and concealed conduit or duct wiring work included in job work |
| 229 | Painting of pumping plant and all other E/m equipment with all labour & T& P |
| 230 | Installation, Testing and Commissioning of all above equipments and pumping plants etc complete in all respect. |
| 231 | SUB STATION OF WTP + MCWR (250 KVA) |
| 232 | SITC of 2mm thick MS Sheet fabricated factory wired dust and vermin proof cubical and floor mounting type control panel comprising of 1 No. incoming V.C.B.(630 Amp) and 2 Nos. outgoing V.C.B. panel with all accessories and protective devices suitable for 250 KVA OR more as per site requirement with best engineering manner 02 Nos.11/0.4 KV transformers. |
| 233 | Supply and laying of 35 Sq.mm size OR more as per side requirement XLPE cable from 11 K.V.UPPCL metering panel to 11 KV incoming H.T. switch gear panel to transformer. With all material labour T&P |
| 234 | Supply Installation Testing and Commissioning of 250 KVA OR more as per site requirement 11/0.433 KV 50 Hz Copper wound oil cooled Transformer with off load tap changer from +7.5% to -15% LV side @ 2.5 % step vectore group Dy11 as per IS 1180, 2014 Part 1 Level 2 effecient with neccessory saefty devices . |
| 235 | Double Plate Earthing( Copper material) of Transformer (as per IER/IS) including civil works ,chamber cover and all material, separate double earthing for each equipment shall be carried outas per IER rules |
| 236 | Installation testing and commissioning of 11 KV/0.4 KV substations including Transformers, HT Panels and L.T. main control panel including all labor T&P complete in all respect. |
| 237 | Supply and making indoor /outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs of 35 sq mm size 3 core XLPE aluminium conductor cable of 11 kv grade. |
| 238 | Provision for routine testing of equipments such as transformer, HT Panels and Main LT Panel at manufacturer’s works. |
| 239 | 19 mm Thickness Electrical resistance sheet |
| 240 | Supply ,fabrication & fitting Cable trench Chequerred plate 6 mm thickness, angle and C Chanel etc. |
| 241 | S/Fof Fire fighting equipments with proper arrangement with best engineering manner such as four nos. fire extinguishers CO2/ ABC type . |
| 242 | Internal & External electrification and lighting (illumination) of Sub station.with campus lightining as per instruction of engineer incharge .Cost of all electromechanical items and concealed conduit or duct wiring work included in job work |
| 243 | NOC from Electrical safety department for all field installations such as Transformer,pumping plants, substation etc as required for completion of work. |
| 244 | Automation of Intake Well & MCWR |
| 245 | For Intake Well |
| 246 | SITC of CE & UL Certified PLC/RTU with redundantCPU & Power supplyin IP 54 enclose suitable to Communicate with GSM based modem unit with redundant CPU & Power supply with annlog & digital parameter & featuers as specified, for each Intakewell to store and transmit data on GSM backbone, RTU/PLC desgined with logic to transfer data at multiple stations with control panel as specified in tender technical specifications. |
| 247 | SITC of G.S.M./G.P.R.S. based wireless communication with 4G modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories include with signal enhancer antenna made for pumping plant internet charges as specified in tender technical specification . |
| 248 | SITC of Intelligent energy meters |
| 249 | SITC of Control Panel with IP 54 Protection, Industrial Grade for all equipment. (Separate for control (24 V) and power equipments.) upto 3 pumps. |
| 250 | SITC of CE/ UL Certified 7\\" HMI touch screen suitable to communication with PLC/RTU for local display & control of process parameters. |
| 251 | Cabling |
| 252 | Complete Cabling for Intake well including all power & control cable of all equipments . |
| 253 | SITC of Security Survelliance IP Camera with recorder |
| 254 | E/M WORKS ON OHT TANK |
| 255 | SITC of Motor operated actuator with sluice valve on OHT of 450 mm size of Zone 3 . |
| 256 | SITC of Flow Meter on OHT delivery line of size 450 mm dia of Zone 3. |
| 257 | SITC of CE & UL Certified PLC/ RTU in IP 54 enclosure suitable to communicate with GSM based modem unit with CPU & Power supply with analog & digital parameter & features as specified, for each tubewell/ OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations ( Payment only for each stand alone OHT OR As per instructions of Engineer Incharge) |
| 258 | SITC of G.S.M./G.P.R.S. based wireless communication with 4G modem for RTU/ PLC Capable to transfer and gather data from remote sites to control stations all accessories included with signal enhancer anteena made for pumping plant with internet charges ( Payment only for each stand alone OHT OR As per instructions of Engineer Incharge) |
| 259 | SITC of Chlorine Analyzer rnge 0-5 ppm (electrolyte with membrane cap; Type- Amperometric. |
| 260 | SITC of CE/UL certified Radar type Level Transmitter for Over haead Tank for OHT |
| 261 | ESTIMATE FOR INSTRUMENTATION AGAINST ZONE-3, DMA 1,2 &3 |
| 262 | SITC of flow control valve for flow controling, pressure monitoring and web based with cable PLC etc Complete at DMA inlet. |
| 263 | 200 mm for Z-3,DMA-2 |
| 264 | 250 mm for Z-3,DMA-1 &3 |
| 265 | SITC of Dismental joint |
| 266 | 200 mm for Z-3,DMA-2 |
| 267 | 250 mm for Z-3,DMA-1&3 |
| 268 | SITC of CE/UL Certified Electromagnetic flow meter at DMA inlet :- |
| 269 | 200 mm for Z-1,DMA-2, |
| 270 | 250 mm for Z-3,DMA-1&3 |
| 271 | SITC of CE/UL Certified Pressure transmitter at DMA inlet :- Supply of CE/UL Certified pressure transmitter CE markd with following technical parameters and Interfacing with PLC panel includingmounting arrangement. Output 4-20 mA / HART Power supply - 24V DC ext. Display - 4\\" LEDAccuracy - +/- 0.1 % of full scale or better Enclosure- IP 68 |
| 272 | SITC of Dosing System at DMA inlet :-Supply of Electro Mechanical type Chemical dosing system 0 to 6 LPH capacity on working pressure 4kg/cm2 to feed Sodium hypo chloride complete set with 100 Litre solution tank.( SCADA Compatible ) |
| 273 | SITC of Residual chlorine analyser / meter at DMA inlet :-Supply of RCA must have automatic sensor cleaning facility at pure water sump and Interfacing with PLC panel. Residual Chlorine meter shall comprises of 3 components i.e. sensors, flow through assembly and transmitter with indicator and gives 2 outputs one to Local display & other to PLC including Mounting arrangement.Overall Range : 0 - 8 mg/l (ppm)Accuracy : 2% of full scaleSupply Voltage : 230 V ac+B7Output : 4-20 mAMembrane free sensor of 2 gold plated electrodes for long term stability and reference electrode (ag/Agcl) must be provided to avoid maintenance. IP 65 Nema 4 housing protection class required. |
| 274 | SITC of CE & UL Certified PLC/ RTU in IP 54 enclosure suitable to communicate with GSM based modem unit with CPU & Power supply with analog & digital parameter & features as specified, for each tubewell/ OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations |
| 275 | SITC of G.S.M./G.P.R.S. based wireless communication with 4G modem for RTU/ PLC Capable to transfer and gather data from remote sites to control stations all accessories included with signal enhancer anteena made for pumping plant internet charges |
| 276 | Master Control Station (MCS) |
| 277 | SCADA DISPLAY |
| 278 | SITC of CE/UL & BIS Certified industrial grade LED MONITOR with latest configrutation as per specification |
| 279 | (i)65\\" |
| 280 | Desktop/PC with i7 processor for as per specification mentioned in technical bid documents. |
| 281 | SITC of CE/UL Certified 5KVA UPS with batteries as per specification mentioned in technical bid document. |
| 282 | Full development version of required TAGS SCADA Software with coustomisation of software for MCS as per requirement |
| 283 | SITC of CE/UL Certified master control room PLC with redundant CPU & power supply at MCS in IP54 - enclouser as spec mentioned in technical bid documents. |
| 284 | SITC of CE/UL Certified Field gateway agent for transfering data from MCS to Central control room. |
| 285 | SITC of GSM based wireless /Broadband/Equipment communication system for PLC capable to transfer & received data & gather dat from remote sites to control station,All accessories included signal enhancer antenna along with running expenses till DLP. |
| 286 | SITC of CE/UL Certified Firewall for network protection. |
| 287 | SITC of SURGE PROTECTOR FOR ETHERNET Communication protection. |
| 288 | SITC of CE/UL certified industrial grade Ethernet Switch. |
| 289 | Mobile App Facility system architecture(Industries internet based & viewed through mobile apps for increased local & Remote Visibility). |
| 290 | Canon/HP or equivalent Laser Printer 1018 or equivement. |
| 291 | Security Surveillance IP camera with recorder (optional) |
| 292 | Installation, Commissioning & testing including required furniture AC etc. |
| 293 | Trial run for 3 month period for MCS |
| 294 | Trial and Run for whole E&M equipment including gaseous chlorine, PAC and03 nos of pumping plant operators, 1 no. electrician, and 3 no. SCADA Operaor each month for 3 months Please Enable Macros to View BoQ information |