|
| 1 | Dismantling plain or corrugated steel sheeting any gauge, any thickness including Nainital or similar pattern roof covering , in wall clading and velley gutters complete all as specified and directed. |
| 2 | Dismantling of wrought iron or mild steel work any description and fixed in any position complete all as specified and directed. |
| 3 | M&L rolled sections as in main and cross beams, hip rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 W (gde E 250 ) quality A complete all as specified and as directed. |
| 4 | S & F 0.50mm thick pre painted/coloured galvalum aluminium zinc coating GI based corrugated steel sheet of any colour in roofing having tensile strength 550 Mpa fixed with self tapping screws all as specifed. |
| 5 | All as per item No. 4 above but plain sheet fix in valley gutter / ridge complete all as specified and as directed. |
| 6 | Dismantling wall & ceilling boards(fibre pulp insulation etc) or insulation boards/ slabs/blankets, any thickness including cover fillets complete all as specified and as directed. |
| 7 | S & F Anodised Alu. Snap grid 605x605 mm frame wk for false ceiling and providing 9mm th Acoustical board/tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed in celing with screws to frame work or with staples on snap grid including hangers 3 mm dia G.I. ( up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 X 3 mm size 60 mm long all as specified |
| 8 | M&L for false ceiling with 10mm thick of panel size 600mm x 900mm plaster of paris sheets fixed with machine screws on GI channel 18 gauge thick, grid work main joists placed at 750mm centres, secondary joists placed at 450mm centres, GI angle suspenders from roof and treating the plaster of paris sheets with thin layer of pop with Gypsum binder, sanding the surfaces till smooth surface is obtained including preparation of surface and applying two coats of oil bound distemper over a coat of primer all as specified and as directed.Make: Gyproc or Equivalent |
| 9 | M and L for 10 mm thick Polypan PS 20010 Prelam PVC (hallow profile) sheets used for fixing on wall Lining and PVC false ceiling inclusive of necessary fixing as directed by manufacturer and engr-in-charge. |
| 10 | S&F 5mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specifiaction complete all as specified and as directed by Engineer-in-Charge |
| 11 | Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. specifically provided for complete all as specified and directed. |
| 12 | M & L for providing 25 mm thick PCC 1:2:4 type B1 ( using 20mm graded stone aggregates ) as in filling in levelling course one roof slab complete all as specified and directed. |
| 13 | Extra over rendering for work in isolated width such as in bands, sunk pannels, cornices, skirting sides of slabs, parapet sides and top drip moulds etc and similar work not exc 15 cm width or girth complete all as specified and directed. |
| 14 | Supply only Liquid water proofing compound . |
| 15 | M/L for taking out old water proofing treatment to RCC roof slab as specified below and as directed by Engr-in-Charge(a) The roof shall be thowoughly wire brushed washed, dried up and cleaned to remove all foreign materials & dust to receive primer.(b) On the dried roof surace apply one coat of bituinous primer @ 100gm/sqm as per manufacture instruction(c) On this primed surface, the approved APP modified bituminius memberane with non woven polyester mat as reinforcement weighing not less than 3.5kg/sqm laid by torch application method & top surface shall be applied with bituminious aluminium paint (d) The overlap while torching shall be 75mm on ongitunidal direction and 100 mm on transverse directionNote : Obtained material to thrown to low lying area. |
| 16 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed. |
| 17 | M&L for rendering cement plaster 10 mm thick in CM 1:6 on fair faces of brick walls finished even and smooth w/o using extra cement complete all as specified and as directed. |
| 18 | M & L for Rendering 05 mm thick cement plaster on concrete surface of ceiling in cement mortor 1:3 shall be even and smooth without using extra cement complete all as specified and as directed. |
| 19 | M&L for rendering cement plaster 15 mm thick in CM 1:4 on fair faces of brick work or conrete wall surfaces finishing the surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 20 | M & L for Preparation of newly plastered surfaces of wall and appling two coats of oil bound distemper on walls over a coat of primer on plastered surfaces complete including 3mm thick wall care putty complete all as specified and as directed. |
| 21 | M & L for Preparation of newly plastered surfaces of wall and appling two coats of cement base paint on walls over a coat of primer on plastered surfaces complete. |
| 22 | M&L for preparation of newly plastered surfaces of ceiling and applying three coat of white washing complete all as specified and as directed. |
| 23 | Complete removal of existing treatment from external surfaces of walls by mechanical means, preperation of old surface and applying two or more coats of premium acrylic smooth exterior paint of required shade @ 1.67ltr/10sqm over and including priming coat of exterior primer applied @2.2kg/10sqm. Painting will be done by smart control machine complete all as specified and directed by Engineer-in-charge. |
| 24 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. |
| 25 | M & L non skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors, etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match. Including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete. |
| 26 | M&L for vitrified coloured tiles 8 to 10mm thick Light shade (square/rectangular) polished area of each tile n exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm th screed bed in CM 1:6 complete all as specified and as directed. |
| 27 | All as per item No 26 above but on skirting over 10 mm th rendering in CM 1:4 complete all as specified and as directed. |
| 28 | M & L Glazed ceramic tiles in vertical surface 450mm x300x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles incl backing coat 10mm thick in CM 1:4 all as direced. |
| 29 | Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid and bedded and pointed in cement mortar complete all as specified and as directed. |
| 30 | M&L for Marble work green marble 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with green marble shade complete all as specified. |
| 31 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations |
| 32 | M&L for 18-20 mm thick Granite (of any type) machine cut bedded and jointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including 15 mm thick screed in CM 1:4 complete all as specified and directed. |
| 33 | Demolition of cement concrete ( unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 34 | M & L for cement concrete Type C2 1:3:6 (using 40mm graded aggregates) as in plinth protection 75 mm thick finished top surface even and smooth without using extra cement complete all as specified and as directed. |
| 35 | M & L for 100 mm thick Cement concrete type D-2 1:4:8 (40 mm graded aggregate) as in sub base complete all as specified and as directed. |
| 36 | M & L for precast concrete interlocking paver block rubber moulded any shape and size confirming to IS 15658-2006 of 60 mm thickness M-40 Grade with grey cement and pigment including 25 mm thick sand cushion complete all as specified and as directed. |
| 37 | M & L for Chequered cement concrete tiles rubber moulded of 20 cm x 20cm x 25 mm thick with grey cement and pigment,set and jointed in neat cement slurry in floors including 15 mm thick screed bed or bedding layers in cement mortar 1:6 for laying tiles complete all as specified and as directed. |
| 38 | Demolition of cement concrete (unreinforced) in Suken portion exe 15 cm thickness (below or aboveground level) complete all as specified and directed. |
| 39 | Providing and carrying out water proofing treatment to toilet, sunken slabs, wet areas etc,after proper surface prepration ,carry out cementitious ingection grouting at leakage point using Cebex 100 plasticised expanding grouting admixture ,application of polymer modified at slab wall junction using Nitoband SBR latex screed modifier cum bonding agent and application ot two coats of brushbond RFX two part acrylic polymer modified cementitious elastomeric waterproof and protective coating etc,complete including 15 mm thick cement plaster in CM 1:4 all tools and plants as per manufacturer's specification paint complete all as specified and directed. |
| 40 | M & L cement conrete 1:7:12 type F2 (uisng 40mm graded aggregate) as in sunkun filling complete all as specified and directed. |
| 41 | S&F as in repairs PVC low/high level flushing cristern white 10 litre capacity incl PVC inlet pipe with brass check low level full both sides alongwith PVC flush pipe 32mm dia jointed to WC and handle incl brackets all as directed. |
| 42 | S & F 600xmmx450mm bevelled edge mirror of selected quality galss, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 43 | S/F in repairs Vitreous china wash basin white flat back size 550 x 400mm including , waste pipe and plug and porcelain stopper and brackets incl cutting for and pinning in ends of brackets or erecting stand along with 32mm dia CP waste coupling and PVC waste pipe complete all as directed. |
| 44 | S&F Brass chromium plated bottle traps 32 mm bore dia for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as directed. |
| 45 | S & F in repairs for PVC connection pipe 15mm dia with PTMT nuts of length 450mm complete all as specified and as directed. |
| 46 | S&F in repairs plastic water closet seat cover, black / White closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging deivce. |
| 47 | S&F in repairs brass chromium plated shower rose 125mm size with or without swivel joints, any size including fixing to steel pipe or union complete all as specified |
| 48 | S&F in repairs Grating round 100 mm size of PTMT (Minimum weight 25gms.) complete all as specified and as directed. |
| 49 | S&F in repairs vitreous china squating pan Orissa pattern of size 580x440 mm white with integral foot rest any pattern complete all as specified and directed. |
| 50 | Supply and fix in repairs for vitreous china EWC of white colour with plastic water closet seat closed pattern with flat bottom (with MS or CP hinging device) and fixing bolts, including connection to drain or out going pipe and to PVC flusing pipe, antisyphonage pipe and all necessary fittings etc complete all as specified and as directed. |
| 51 | S&F PVC SWR Nahani/floor trap plain with grating including jointing with solvent cement, dia of outlet 75mm, water seal minimum 75mm, complete all as specified |
| 52 | Taking up or down steel tubing and connections including cleaning for refixing of 15 mm bore of pipe complete all as specified and as directed. |
| 53 | Taking up or down steel tubing and connections including cleaning for refixing of 20 mm bore of pipe complete all as specified and as directed. |
| 54 | Fixing only 15 mm bore GI pipe medium grade with all fittings and fixtures and fixed to wall, ceiling, floor complete all as specified and as directed. |
| 55 | Fixing only 20 mm bore GI pipe medium grade with all fittings and fixtures and fixed to wall, ceiling, floor complete all as specified and as directed. |
| 56 | M & L for 15 mm bore GI pipe medium grade with all fittings and fixtures and fixed to wall, ceiling, floor complete all as specified and as directed. |
| 57 | M & L for 20 mm bore GI pipe medium grade with all fittings and fixtures and fixed to wall, ceiling, floor complete all as specified and as directed. |
| 58 | Dismantling water tanks and removing to store of capacity exc. 250 litres & n.exc 500 litres. |
| 59 | S & F rotational moulded polyethylene double layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996 of 500 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe spouts for connecting inlet, outlet, over flow and washout pipes all as specified and as directed. |
| 60 | S & F in repairs ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore and fixed (minimum weight 210 gms) complete all as specified and as directed. |
| 61 | S & F in repairs 15 mm dia stop valves cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union fixed in repair for 15 mm dia GI pipe all as specified and as directed. |
| 62 | S&F in repairs 15 mm dia bib taps fancy type long body chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass furrule and fixed for 15mm dia pipe complete all as specified and as directed. |
| 63 | S & F in repairs 15 mm dia pillar taps fancy type cromium plated with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15 mm dia pipe complete all as specified and as directed. |
| 64 | S&F in repair Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15 mm dia |
| 65 | S&F in repair Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and as directed by Engineer-in-Charge |
| 66 | S&F 20mm nominal size brass float valve, high pressure, with polythene float and flynut, screwed for iron pipe and fixed complete all as specified Please Enable Macros to View BoQ information |