|
| 1 | Design, Construction, Supply of all materials, Erection and Commissioning of co treatment facilities (11.1 MLD STP cum 24.0 KLD FSTP) with all the civil, electrical , mechanical, instrumentation and scada system, LT/HT panel, sub station building, DG set foundation, admin buidling, laboratories, meter room and campus development [Construction of Internal Road (CC Road, 3.5m wide, area approx 1500sqm.), staff quarters as per requirement and specification, external water supply (20KL tank including tube well and pumping arrangement, electrification & street llighting and sanitation work) etc. all complete for STP with co-treatment facilities. STP shall be based on SBR Technology. The effluent quality for agricultural uses (PH-6.5 TO 8.3, SS-30 mg/l, Oil&Grease-10 mg/l, BOD-10mg/l) , COD-30 mg/l , Residual chlorine-nil , TKN-10mg/l, Nitrate N-10 mg/l, F.C.-230 MPN/100 ml, Dissolved P-5 mg/l (preferable 2 mg/l). ) shall be maintained as per CPHEEO manuals. Latest NGT norms for effluent discharge shall be adhered. The cost of MPS (Civil and E&M works) and treated effluent pipe are included in this estimate. |
| 2 | Civil works |
| 3 | RCC retaining wall of ht. 1.8m above GL (length 150m) |
| 4 | Construction of Boundary Wall 2.0m ht. with wirefencing (additional) above plinth level with RCC Column @3m c/c with plinth beam and foundation avg. 1.2m depth including reinforcement and RCC coping on top of wall with plaster (1:4) and painting (apex painting 3 coat) as per type design and drawing at the STP site |
| 5 | MS gate (3.6m wide with wicket gate) |
| 6 | Excavation below G.L. upto depth as specified for laying sewer and manhole ordinary soil (earth, sand, loam and clay) including cutting of joints pits ramming dressing) leveling, refilling of trenches in 20 cm layer watering and ramming the same including |
| 7 | (a) 0.00 to 1.50 m |
| 8 | (b) 01.50 to 03.00 m |
| 9 | (c) 03.00 to 04.50 m |
| 10 | (d) 04.50 to 06.00 m |
| 11 | Provide and fix close timbering in trenches for the depth as specified below G.L. consisting of 40 mm thick approved country wood plank for polling board 125 x 75 mm eucalyptus-Safeda-Sal Wood wallers and 100 mm dia ballies for shuttering at 1.5 m C/C including all labour etc , complete |
| 12 | (a) 0.00 to 3 m |
| 13 | (b) 03.00 to 06.00 m |
| 14 | Same as item No. 2 but for open timbering (No timbering for depth below 1.50m) |
| 15 | (a) 1.50 to 03.00 m |
| 16 | Supply of following sizes of RCC spigotted and socketed non pressure pipes( Dia. In mm ) with structural strength as per IS 458 : 2003 and its latest amendment(s).NP3 |
| 17 | 300 mm dia pipe |
| 18 | 350 mm dia pipe |
| 19 | 400 mm dia pipe |
| 20 | 450 mm dia pipe |
| 21 | 500 mm dia pipe |
| 22 | 600 mm dia pipe |
| 23 | 700 mm dia pipe |
| 24 | 800 mm dia pipe |
| 25 | 900 mm dia pipe |
| 26 | 1000 mm dia pipe |
| 27 | Laying, Jointing of following sizes of R.C.C. Hume pipe NP3 Class Socket / spigot rubber ring jointing and specials from store to the work lowering and laying the same in to the trenches upto depth as specified below G.L. true to alignment |
| 28 | 300 mm dia pipe |
| 29 | 00.00 - 0 1.50 m |
| 30 | 01.50 - 0 3.00 m |
| 31 | 03.00 - 04.50 m |
| 32 | 350 mm dia pipe |
| 33 | 03.00 - 04.50 m |
| 34 | 400 mm dia pipe |
| 35 | 00.00 - 0 1.50 m |
| 36 | 03.00 - 04.50 m |
| 37 | 04.50 - 06.00 m |
| 38 | 450 mm dia pipe |
| 39 | 03.00 - 04.50 m |
| 40 | 500 mm dia pipe |
| 41 | 04.50 - 06.00 m |
| 42 | 600 mm dia pipe |
| 43 | 01.50 - 0 3.00 m |
| 44 | 04.50 - 06.00 m |
| 45 | 700 mm dia pipe |
| 46 | 01.50 - 0 3.00 m |
| 47 | 03.00 - 04.50 m |
| 48 | 04.50 - 06.00 m |
| 49 | 800 mm dia pipe |
| 50 | 03.00 - 04.50 m |
| 51 | 04.50 - 06.00 m |
| 52 | 900 mm dia pipe |
| 53 | 04.50 - 06.00 m |
| 54 | 1000 mm dia pipe |
| 55 | 04.50 - 06.00 m |
| 56 | Cement concrete work in bedding below G.L. at specified depth with cement, coarse sand and 20 mm gauge approved stone ballast (1:2:4) including supply of all materials, labour, T&P etc. required for the proper completion of work. |
| 57 | (a) 00.00 to 01.50 m |
| 58 | (b) 01.50 to 03.00 m |
| 59 | (c) 03.00 to 04.50 m |
| 60 | (d) 04.50 to 06.00 m |
| 61 | Filling granular material (well graded crushed rock or gravel maximum size 20mm) into the trenches for class B bedding (granular bedding) including watering compaction, labour T&P etc. for completion of work. (As per statement) |
| 62 | (b) 01.50 to 03.00 m |
| 63 | Supply (excluding cartage) of granular material (well graded crushed rock or gravel of maximum size 20mm) for class B bedding (granular bedding) |
| 64 | Construction of circular type brick masonry HD (HD20) manhole (with Extra Heavy Duty type manhole cover) with top slab made of cement concrete 1:1.5:3 with graded granite stone aggregate (12 mm nominal size), wall made of brick masonry using 1st class bricks having crushing strength between 100 to 149 kg/cm² in cement mortar 1:4 inside plastering 12 mm thick 1:4 finished smooth with neat cement, pinning, outside plaster 1:4 and making channels with cement concrete 1:2:4 graded granite stone aggregate (12 mm nominal size) complete as per specifications. |
| 65 | 900mm internal dia., 1.65m deep |
| 66 | 1200mm internal dia., 3.30m deep |
| 67 | 1500mm internal dia., 4.95m deep |
| 68 | 1800mm internal dia., 9.0 m deep |
| 69 | Extra for every additional depth of 1 m or part there of in following size of circular manholes. |
| 70 | 900mm internal dia., 1.65m deep |
| 71 | 1200mm internal dia., 3.30m deep |
| 72 | 1500mm internal dia., 4.95m deep |
| 73 | 1800mm internal dia., 9.0 m deep |
| 74 | Dismantling/Cutting of the following type of road for laying sewers, manholes, sewer connection chambers etc. including shorting out and stacking serviceable materials and disposal of unserviceable materials upto distance of 50 m. |
| 75 | Bituminous road |
| 76 | Concrete road |
| 77 | Interlocking tile road |
| 78 | Reinstatement of the following type of road for laying sewers, manholes, sewer connection chambers etc. including shorting out and stacking serviceable materials and disposal of unserviceable materials upto distance of 50 m. |
| 79 | Bituminous road |
| 80 | Concrete road |
| 81 | Interlocking tile road |
| 82 | Tack & SDBC Coat on existing BT Road (remaining area after reinstatement) |
| 83 | Provision for laying of sewer by trenchless technology Supply of MS pipe (As per IS:3589 made from steel confirming to IS:2062), with anti corrosive treatment with P.U. coating |
| 84 | 600 mm dia pipe,10mm Pipe Wall Thickness |
| 85 | 700 mm dia pipe,12mm Pipe Wall Thickness |
| 86 | Installation of product pipe by HDD method including preparing and setting up the plants and equipement, preparing new pipe work material, installation new pipe-work and commissioning system or making the system ready for commissioning by HDD operation including, all related civil and mechanical works like excavation, shoring/strutting, etc. drilling, stringing, reaming, and pulling back the new pip-work on the designed bore path alignment, proper disposal of drilling fluid, and back fill of site after completion all inclusive as per IndSTT:101:2018: Code of prectice of HDD Technique Suiting Indian Conditions. (depth up to 6m. (INDSTT 2023) |
| 87 | 700 mm dia pipe |
| 88 | Providing and erecting temporary barricading at site as per drawing/ direction of Engineer-in-Charge which includes hiring of Ballies and arrangement for traffic diversion such as traffic signals during construction at site as directed by the Engineer-in-Charge. The barricading provided shall be retained in position at site continuously i/c shifting of barricading from one location to another location as many times as required during the execution of the entire work till its completion. Rate include its maintenance for damages, painting, all incidentals, labour materials, equipments and works required to execute the job. The barricading shall not be removed without prior approval of Engineer-in-Charge. (Note :- One time payment shall be made for providing barricading from start of work till completion of work i/c shifting. The barricading provided shall remain to be the property of the contractor on completion of the work). The rate is for unit length of pipe laying. |
| 89 | Disposal of Surplus Earth |
| 90 | I&D structure with 1 gate across the Drain and 1 gate at the diversion pipe inlet) |
| 91 | Cnstruction of IPS as per specification, accesory building & design approved by Engineer in Charge |
| 92 | IPS-1 - 6.72 MLD |
| 93 | IPS-2- 5.52 MLD |
| 94 | Rising Main |
| 95 | Clearing jungle including uprooting of rank vegitation, grass, brush wood trees and saplings of girth upto 30cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50m outside the periphery of the area cleared. |
| 96 | Excavating trenches for pipes including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering etc., and disposing of surplus excavated soil as directed, within a lead of 50 m. |
| 97 | 0.0 to 1.5 mtr. Depth |
| 98 | Pipes conforming to IS : 8329 - 350 mm including Supply and laying standard specials etc. all complete Up to 400 mm dia |
| 99 | Pipes conforming to IS : 8329 - 300 mm including Supply and laying standard specials etc. all complete Up to 300 mm dia |
| 100 | Providing and fixing C.I. sluice valves (with cap) complete with bolts,nuts, rubber insertions etc. (the tail pieces if required will be paid extra (350mm dia) UPJN (2448) & Qtn |
| 101 | Providing and fixing C.I. sluice valves (with cap) complete with bolts,nuts, rubber insertions etc. (the tail pieces if required will be paid extra (300mm dia) UPJN (2448) & Qtn |
| 102 | Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete |
| 103 | 150 mm |
| 104 | Laying, jointing, carting of 350mm dia DI K7 pipe and specials from store to the work lowering the same in to the trenches upto depth as specified below G.L. inclduing testing of pipes etc. |
| 105 | Laying, jointing, carting of 300mm dia DI K7 pipe and specials from store to the work lowering the same in to the trenches upto depth as specified below G.L. inclduing testing of pipes etc. |
| 106 | Providing & Constructing masonry Chamber 1.5x1.5x1.5 m inside, in brick work in cement mortar 1:3 (1 cement : 3 coarse sand) for valve, with cast insitu RCC slab with necessary reinforcment.The valve chamber shall be plastered with CM 1:4, A levelling coars of M10 shall be provided.The cost is inclusive of excavation , disposal and construction of valve chamber with moduar bricks plasting with cement mortar with all lead and lift etc., as per specification & drawing. (Refer 10.4 for Unit Cost Estimate) |
| 107 | Sluice valve, Air valve chambers |
| 108 | Dismantling/cutting of the following type of road for laying sewers, manholes, sewer connection chambers etc. including shorting out and stacking serviceable materials and disposal of unserviceable materials upto distance of 50 m. |
| 109 | B.O.E road |
| 110 | Reinstatement of the following type of road for laying sewers, manholes, sewer connection chambers etc. including shorting out and stacking serviceable materials and disposal of unserviceable materials upto distance of 50 m. |
| 111 | B.O.E road |
| 112 | Proposal for supply of 1500 Ltr Capacity Sewer Suction Machine mounted on TATA 407 Gold/2900 WB Truck Chassis, RTO, Insurance and transpoaton upto destination are included in the cost. |
| 113 | Proposal for supply of 2000 Ltr Capacity Sewer Suction Machine mounted on TATA 407 Gold/2900 WB Truck Chassis. |
| 114 | E&ME./M. Works at IPS-1Electrical Works |
| 115 | H.T.Panel( Comprising with 1 -I/C and 2 -O/G. (SITC of Indoor Type Floor mounted HT Panel with 11 KV, 630 Amps 3 phase, 50 Hz Vacuum Circuit Breaker (VCB) Panel Fabricated by System Integrator of VCB Manufacturer as per IEC 62271-1,100,200 Standard made from Powder painted pre-fabricated, CRCA sheet steel /High quality Aluminium-Zinc (Aluzinc) coated sheet steel. Fabrication shall be done through CNC turret press and CNC bending machine having a rupturing capacity of 500 MVA, 26.3 KA breaking capacity for 3 sec, Internal arc type tested for 26.3KA for 1 sec with AFLR clasification with suitable capacity of bus bar connected with the incoming and outgoing panels as per given details- |
| 116 | Supply installation testing and commissioning of only TTA Incoming Panel comprising of following: - VCB 630 Amps . VI of VCB should be sealed for 30000 operation. VCBoperationg mechanism should be of M2 duty for minimum 10000 mechanicaloperation. - Closing & tripping coil of VCB should be of continious rating to achive minimal failure. - Resin Cast type CT having Ratio : 400-200A/ 1-1 A, Core1: 5P20, 5 VA; Core 2: 0.5, 5 VA (How ever CT Ratio shall be decided as per load requirement)- VT Ratio: 11KV/1.732/110V/1.732/110V/1.732, -Core 1: 0.5, 20VA should be floor mounted and to be connected from the back side of the panel.- Numerical relay (should be VCB manufacturer's own make) having protections of 50,51, 50N,51N,TCS. The relay shall have programable 4 digital Input , programable 6 Digital Output and programable 4 nos. LED at HMI.- Ammeter with Selectorswitch and Volt meter with Selector switch- Multifunction Meter of Acc Class 0.5, having facility to monitor KW, KVA,KVAR, PF, KWH, KVARH, KVAH, A,V etc.- Trip circuit supervision relay (feature of numerical relay)- LR, TNC switch, indication lamp - CB ON/OFF, spring charge, Auto trip, TCS healthy etc., Space heaters - Power Pack (230V AC- 110V DC) and 8/12 window Annunciator. |
| 117 | Supply Installation Testing and Commissioning of only TTA Outgoing Panel comprising of following: - VCB 630 Amps . VI of VCB should be sealed for 30000 operation. VCBoperationg mechanism should be of M2 duty for minimum 10000 mechanicaloperation. - Closing & tripping coil of VCB should be of continious rating to achive minimalfailure. - Resin Cast type CT having Ratio : 400-200A/ 1-1 A, Core1: 5P20, 5 VA; Core 2: 0.5, 5 VA (How ever CT Ratio shall be decided as per load requirement)- Numerical relay (should be VCB manufacturer's own make) having protectionsof 50,51, 50N,51N,TCS. The relay shall have programable 4 digital Input ,programable 6 Digital Output and programable 4 nos. LED at HMI.- Ammeter with Selectorswitch and Volt meter with Selector switch- Multifunction Meter of Acc Class 0.5, having facility to monitor KW, KVA,KVAR, PF, KWH, KVARH, KVAH, A,V etc.- Trip circuit supervision relay (feature of numerical relay)- LR, TNC switch, indication lamp - CB ON/OFF, spring charge, Auto trip, TCS healthy etc., Space heaters - Power Pack (230V AC- 110V DC) |
| 118 | Providing & Laying XLPE insulated as per IS:7098/II/85 H.T.cable as per PWD specification for electrical Works for working voltage 11 K.V.(E) in existing RCC / Hume /Stoneware / PVC pipe/ open duct/cable trench, on existing cable trays or on surface etc. including making necessary connection, testing etc. |
| 119 | 3 core X 120 sq.mm. armored HT Cable (From HT Panel to Transformers) |
| 120 | SITC of 11 KV End Termination Kit Indoor type (3 core, 120sq.mm) |
| 121 | 11 KV, 2.5 mm thick with proof voltage 22 KV / 3 min. and Break DownVoltage 45 KV |
| 122 | Transformer: 160 KVA with Off -LTC (+5% to - 10% @ 2.5%) : S I T C of star rated Copper wound distribution Transformer of 160 KVA rating 11/0.433KV Delta-Star Connected, Vector Group Dyn 11,ONAN Cooled & losses as defined as per IS 1180 part I 2014. including standard accessories like conservator, silica gel breather, radiator, fins, HT cable box & LT cable boxes, temperature rise in winding/oil 35-40 degree C , ISI marked drain valve, Dial type Temperature gauge, first filling of transformer oil as per IS :335-1953, Epoxy based paint, including carrying of pre-commission Testing & Charging of Transformer complete in all respect. |
| 123 | L.T. Panel ( ONLY TTA PANEL)SITC of 0.415 kV L.T. control panel for pumping plant-L.T. control panel suitable to operated on 415 ± 6 % volt , 3 Phase , 50 Hz, AC supply as per details given below-(A) 2 Nos incoming MCCB panels and 1 No outgoing MCCB panel, each consisting of following items -(i) 4 pole MCCB with thermal magnetic release, 250 A, 25 KA with adjustable short circuit and over load setting- 1 No.(ii) C.Ts of suitable ratio- 1 No.(iii) Ammeter with selector switch - 1 No.(iv) Voltmeter with selector switch- 1 No. (v) Power factor meter(0.5 Lag&0.5Lead) - 1 No.(vi) Frequency meter-1 No.(vii) KWH meter - 1 No. (viii) 2 Pole over current relay & one pole earth fault relay - 1 No.(B)Bus bar chamber having 3 Nos. bus bars for phase and 1 No. bus bar for neutral of suitable size – 1 No. (C) 4 Nos. composite panels for pumping plants, each consisting of following items –(i) 4 pole MCCB 160 A current rating, 25 KA short circuit breaking capacity With Microprocessor based release with adjustable adjustable O/L & S/C setting with Inbuilt Instantaneous and Ground fault Protection -1 No.(ii)C.Ts. of suitable ratio- 1 No.(iii)Ammeter with selector switch - 1 No.(iv) Automatic start / stop device according to level in the sump- 1 No.(v)Indicating lamps(Auto/manual/low level/ reverse rotation) - 1 Sett (D) 3 Nos. outgoing panels for miscellaneous works, each consisting of following items – (i) MCB of 40 A capacity- 1 No.(ii) C.Ts. of suitable ratio- 1 No. (iii) Ammeter with selector switch - 1 No.(iv) Indicating lamps- 1 Set (E)APFC Panel for total load.(F)4 pole MCCB with thermal magnetic release, 250 A, 25 KA with adjustable short circuit and over load settingfor DG sets incoming - 1 NO (G) Bus coupler arrangement in panels |
| 124 | LT Cable laying and jointingPower and control cable-Supply of 150 sq. mm 3.5 core cable - 1 Run required for power from each Transformer to each L.T. panel , 95 sq. mm X3 core-1 run cable for power from starters to 30 KW Motors including lugging and jointing, laying, trench excavation and compaction as well as complete cabling of automation system etc. complete in all respect. |
| 125 | EarthingPlate Earthing as per IS:3043 with copper Earth plate of purity >95% of size 600mm x 600mm x 3.0mm by embodying 3 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/charcoal, testing of earth resistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensure to enter in measurment book. All as per pre approved by Engineer in charge. |
| 126 | Pipe Earthing as per IS:3043- 1987 with 3.0 Mtr. Long, 40 mm dia. ' B 'class G.I. Pipe IS: 1239 (Part-1) 2004, Equivalent to BS : 1387 withperforated holes of 12 mm dia ,including all accessories like nut, bolts,reducer, nipple, wire meshed funnel, and Heavy duty weather proof polypropylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, BottomDia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipecomplete with alternate layers salt and coke/ charcoal, testing of earthresistance for value of 5 ohms or less as required & must record byengineer in charge during site visit and ensure to enter in measurmentbook.All as per pre approved by Engineer in charge. |
| 127 | Supply & Laying of 50mmX6mm size GI earth strip in horizontal or vertical run in ground/surface/recess including riveting,soldering, saddles, Jointing shall be done by overlapping and with 2 set of GI nut bolt & spring washer spaced at 50cm making connection etc.(20meter for each earthing) |
| 128 | Charges of Electrical safety Clearance |
| 129 | Expenditure on B&L Form, Challan etc. |
| 130 | Proper fencing of substation portion as per I.E. rules. |
| 131 | STARTER PANELSITC of Compraising of Variable Frequency Drive suitable to meet the basic requirement of motor protections and suitable to run 40 HP motor (To be fixed in composite panel of LT Panel)- Ref. UP Jal Nigam E&M SOR, 2020 |
| 132 | Mechanical Works PumpsThe submersible non clog pumpset should be single stage having two vanes enclosed impeller coupled with submersible motor of 40 HP Rating 400 Volt ±10%,3 phase 50 Hz, solid handling capacity 125mm, suitable to pump raw sewage with an specific gravity 1.03 having following construction of material with 10 Met. cable as offered. (2W+2S)Casing-2% Ni Cl. IS.210 grade F.G.220 with hardness 275 BHN.Impeller-Stainless steel CF-8Mshaft-stainless steel AISI-410Discharge of pump= 4550 lpmTotal Head= 22 MSpeed=980Quantity of pumps.Guid Rail SystemGuide rail system (Automatic coupling system) for 40 HP submersible pump sets complete for above pump set. - 4 SetsLifting Chain , MOC- alloy steel, lifting chain with oval ring @ 1m & with D/Bow shackle - 4 Sets |
| 133 | Main piping and Valves.200 mm dia delivery for pumps , 300 mm dia common header line.Valves.Confirming to IS 780/2906 or as applicable PN rating- 1.0Type of liquid to be handled-potable waterMaterial of constructionBody-CI,IS-210 grade FG 200Wedge-CI IS210 Grade FG200Spindle-Stainless steel AISI304Sheet and face Ring-SS ASTMA 743 Grade C.F.8 MChannel& Shoe-S.S.AISI,.304Drain& Air plug-S.S.AISI.304Bushing arrangement-Halprene on bronzeRivets-AISI:304Fasteners-MS |
| 134 | Motor Operated Sluice Valve 200 mm dia |
| 135 | Motor Operated Sluice Valve 300 mm dia |
| 136 | Reflux valve 200 mm dia N.B |
| 137 | PipingsNote : Regarding the size of pipes, Tee, Bend etc, contractor is required to designed them self and may got it approved by the department before execution of works along with layout drawing |
| 138 | 200 mm, K9 delivery pipes for pumping plants |
| 139 | 300 mm, K9 common header pipes |
| 140 | Specials like bend, tee, D Joint etc. |
| 141 | Nut Bolt, Washer Rubber packing etc |
| 142 | INSTALLATION, TESTING & COMMISSIONING |
| 143 | Installation & Commissioning of all Pump set,Piping & Valves as mentioned in above |
| 144 | Level Transmitter (For Hi-Lo cut-off & alarms) |
| 145 | SITC of Radar type level transmitter shall be provided in the pump house for measuring the sewage level in wet sump. The indicator shall be digital type showing depth in meters and shall be capable for input to PLC or HMI touch sceen for display. |
| 146 | Electro magnetic flow meter |
| 147 | SITC of CE/UL certified 300 mm dia Electro magnetic flow meter suitable to measure 0 to 30 MLD flow to be fitted in 300 mm dia main header line. |
| 148 | E.O.T. Crane |
| 149 | SITC of 3 Tonn E.O.T. crane providing, erecting and commissioning single girder electrically operated rectangular over head travelling crane with 6 m lift complete with wire rope hoist, class II duty, all three motions electrically operated by suitable rating motor IP 54, control panel and down pendent control block. |
| 150 | Chequerred plate and guards |
| 151 | SITC of 3mm thick M.S chequerred plate over all the run of cables trenches to cover properly and M.S. grill and M.S. guard over all pipes ducts and other point where required as per site condition (Ref. UP Jal Nigam, GM Gzb Rate) (3X0.75+3X0.9+7X0.6+1X0.9)X1=10.05sqmm. |
| 152 | PAINTING |
| 153 | Painting of all pumps piping and valves with two coat enamel paint. |
| 154 | LIGHT WIRING & Electrification |
| 155 | Complete Internal Electrification of LT Panel room with 2 Nos. Exhaust Fan |
| 156 | Complete Internal Electrification of HT Panel room with 2 Nos. Exhaust Fan |
| 157 | IPS Campus with Solar Panel and LED Light |
| 158 | D.G. SET AND ACCESSORIES |
| 159 | SITC of Radiator Cooled and Turbo charged Silent type DG set , engine ,alternator capable of developing 160 kVA at 415+6%, 50 Hz AC at 0.85 P.F. lagging and self exciting coupled with suitable BHP diesel engine through flexible coupling and mounted on common base plate complete with fuel tank inside the acousting system and inbuilt control panel, Governor, Manual & electric Start , Batteries with battry charger, Engine instruments panel,AVM pads, All controls for operationof DG set are from outside the enclosure with DG control panel having Microprocessor based Genset monitoring like Running Hour, RPM, Low Lube Oil tripping & control system, Ammeter, Voltmeter, PF meter, frequency meter, KWH meter,digital fuel display meter, Ind.lamps etc. mounted inside enclosure , visible and accessiblefrom outside. T , 3 Met exhaust pipe, D.G. set shall be mounted under open sky resting on the foundation as per design. |
| 160 | Pipe Earthing as per IS:3043- 1987 with 3.0 Mtr. Long, 40 mm dia. ' B ' class G.I. Pipe IS: 1239 (Part-1) 2004, Equivalent to BS : 1387 withperforated holes of 12 mm dia ,including all accessories like nut, bolts,reducer, nipple, wire meshed funnel, and Heavy duty weather proof polypropylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, BottomDia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required. |
| 161 | Plate Earthing as per IS:3043 with copper Earth plate of purity >95% of size 600mm x 600mm x 3.0mm by embodying 3 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/charcoal, testing of earth resistance for value of 5 ohms or less as required. |
| 162 | Supply & Laying 50 mm X 6mm size GI earth strip in horizontal or vertical run in surface by means of Earth strip DMC Insulator including riveting/soldering/ welding, Jointing shall be done by overlapping and with 2 set of Brass (for Cu strip) / GI (for GI Strip) nut bolt & spring washer spaced at 50cm making connection etc. as required. |
| 163 | Providing and Laying cable for DG Set to Panel 150 sq mm X 3.5 core x 1 run( armored aluminium ). |
| 164 | Supplying and making one end termination with heavy duty brass compression gland (as per IS 12943- 1990) SIBG type, heavy duty aluminium lugs (as per IS 8309 - 1993 & IS 8337-1976 ) duly crimped with crimping tool, PVC tape as per PWD specification for electrical Works etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade for 3.5 core X 150 sq mm. |
| 165 | SCREENS AND GATES: |
| 166 | Rising type thimble mounted CI Sluice Gates of reputed make at IPS |
| 167 | Stainless steel Manual Screen with bar size 50 mm x 10 mm. Gaping between bars should be 20 mm. there should be atleast 1 stainless steel punji for cleaning purpose. |
| 168 | Packing and Frieght @ 3% of ( 25,26 ) |
| 169 | Installation, Testing and Commissioning @ 10% of 25,26 |
| 170 | AUTOMATION OF IPS |
| 171 | CE& UL certified PLC/RTU with redundant CPU & power supply in IP 54 enclosure suitable to communicate with GSM based modem unit with redundant CPU & power supply with annalog & digital paramter & features as specified for each ZPS/OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations as specified in tender technical specification including full developed version of scada software with customization of software with laptop/desktop etc to monitor and control the ips from remote places. |
| 172 | GSM/GPRS based wireless communication with 4G modem for RTU/PLC capable to transfer & gather data from remote sites to control stations all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender technical specification. |
| 173 | CE/UL certified intelligent Smart Energy Meter |
| 174 | Auto phase reversal unit with inbuilt time delay & enclosure (confirm to IEC-60947-1 & IEC-60947-b-1)160 AMP rating |
| 175 | Electronic sensor type pressure measuring device suitable for pressure measurements of sewage flow in delivery and common header line. The material of construction of housing and other parts in contact with sewage shall be of stainless steel. These shall be of required protection category and complete with signal transmitting device and digital pressure indicator. |
| 176 | CE/UL Certified Surge protector for control panel. |
| 177 | CE/UL Certified 7\\" HMI touch screen suitable to communication with PLC/RTU for local display & control ofp rocess parameters. |
| 178 | Security Survillance IP Camera with recorder |
| 179 | Installation, commissiong & testing of above automation work |
| 180 | Trial run of automation work for 3 month period for IPS |
| 181 | Three month Expenditure on Operator (IPS-1) in 3 Shift |
| 182 | Diesel Consumption During Trial and Run Period (IPS-1) |
| 183 | E./M. Works at IPS-2 Electrical Works |
| 184 | L.T. Panel ( ONLY TTA PANEL)SITC of 0.415 kV L.T. control panel for pumping plant-L.T. control panel suitable to operated on 415 ± 6 % volt , 3 Phase , 50 Hz, AC supply as per details given below-(A) 2 Nos incoming MCCB panels and 1 No outgoing MCCB panel, each consisting of following items -(i) 4 pole MCCB with thermal magnetic release, 160 A, 25 KA with adjustable short circuit and over load setting- 1 No.(ii) C.Ts of suitable ratio- 1 No.(iii) Ammeter with selector switch - 1 No.(iv) Voltmeter with selector switch- 1 No. (v) Power factor meter(0.5 Lag&0.5Lead) - 1 No.(vi) Frequency meter-1 No.(vii) KWH meter - 1 No. (viii) 2 Pole over current relay & one pole earth fault relay - 1 No.(B)Bus bar chamber having 3 Nos. bus bars for phase and 1 No. bus bar for neutral of suitable size – 1 No. (C) 4 Nos. composite panels for pumping plants, each consisting of following items –(i) 4 pole MCCB 125 A current rating, 25 KA short circuit breaking capacity With Microprocessor based release with adjustable adjustable O/L & S/C setting with Inbuilt Instantaneous and Ground fault Protection -1 No.(ii)C.Ts. of suitable ratio- 1 No.(iii)Ammeter with selector switch - 1 No.(iv) Automatic start / stop device according to level in the sump- 1 No.(v)Indicating lamps(Auto/manual/low level/ reverse rotation) - 1 Sett (D) 3 Nos. outgoing panels for miscellaneous works, each consisting of following items – (i) MCB of 40 A capacity- 1 No.(ii) C.Ts. of suitable ratio- 1 No. (iii) Ammeter with selector switch - 1 No.(iv) Indicating lamps- 1 Set (E)APFC Panel for total load.(F)4 pole MCCB with thermal magnetic release, 160 A, 25 KA with adjustable short circuit and over load settingfor DG sets incoming - 1 NO (G) Bus coupler arrangement in panels |
| 185 | LT Cable laying and jointing |
| 186 | Power and control cable-Supply of 95 sq. mm 3.5 core cable - 1 Run required for power from each Transformer to each L.T. panel , 50 sq. mm X3 core-1 run cable for power from starters to 25 HP Motors including lugging and jointing, laying, trench excavation and compaction as well as complete cabling of automation system etc. complete in all respect. |
| 187 | Earthing |
| 188 | Plate Earthing as per IS:3043 with copper Earth plate of purity >95% of size 600mm x 600mm x 3.0mm by embodying 3 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe ,including all accessorieslike nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/charcoal, testing of earth resistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensure to enter in measurment book. All as per pre approved by Engineer incharge. |
| 189 | Pipe Earthing as per IS:3043- 1987 with 3.0 Mtr. Long, 40 mm dia. ' B ' class G.I. Pipe IS: 1239 (Part-1) 2004, Equivalent to BS : 1387 with perforated holes of 12 mm dia ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof polypropylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earthresistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensure to enter in measurment book.All as per pre approved by Engineer in charge. |
| 190 | Supply & Laying of 50mmX6mm size GI earth strip in horizontal or vertical run in ground/surface/recess including riveting,soldering, saddles, Jointing shall be done by overlapping and with 2 set of GI nut bolt & spring washer spaced at 50cm making connection etc.(20meter for each earthing) |
| 191 | Charges of Electrical safety Clearance |
| 192 | Expenditure on B&L Form, Challan etc. |
| 193 | STARTER PANEL |
| 194 | SITC of Compraising of Variable Frequency Drive suitable to meet the basic requirement of motor protections and suitable to run 25 HP motor (To be fixed in composite panel of LT Panel)- |
| 195 | Mechanical Works PumpsThe submersible non clog pumpset should be single stage having two vanes enclosed impeller coupled with submersible motor of 25 HP Rating 400 Volt ±10%,3 phase 50 Hz, solid handling capacity 125mm, suitable to pump raw sewage with an specific gravity 1.03 having following construction of material with 10 Met. cable as offered. (2W+2S)Casing-2% Ni Cl. IS.210 grade F.G.220 with hardness 275 BHN.Impeller-Stainless steel CF-8Mshaft-stainless steel AISI-410Discharge of pump= 3150 lpmTotal Head= 20 MSpeed=980Quantity of pumps.Guid Rail SystemGuide rail system (Automatic coupling system) for 25 HP submersible pump sets complete for above pump set - 4 setsLifting Chain , MOC- alloy steel, lifting chain with oval ring @ 1m & with D/Bow shackle - 4 sets |
| 196 | Main piping and Valves.200 mm dia delivery for pumps , 300 mm dia common header line.Valves.Confirming to IS 780/2906 or as applicable PN rating- 1.0Type of liquid to be handled-potable waterMaterial of constructionBody-CI,IS-210 grade FG 20Wedge-CI IS210 Grade FG200Spindle-Stainless steel AISI304Sheet and face Ring-SS ASTMA 743 Grade C.F.8 MChannel& Shoe-S.S.AISI,.304Drain& Air plug-S.S.AISI.304Bushing arrangement-Halprene on bronzeRivets-AISI:304Fasteners-MSMotor Operated Sluice Valves |
| 197 | Motor Operated Sluice Valve 200 mm dia |
| 198 | Motor Operated Sluice Valve 300 mm dia |
| 199 | Reflux Valve |
| 200 | Reflux valve 200 mm dia N.B. |
| 201 | PipingsNote : Regarding the size of pipes, Tee, Bend etc, contractor is required to designed them self and may got it approved by the department before execution of works along with layout drawing. |
| 202 | 200 mm, K9 delivery pipes for pumping plants |
| 203 | 300 mm, K9 common header pipes |
| 204 | Specials like bend, tee, D Joint etc |
| 205 | Nut Bolt, Washer Rubber packing etc |
| 206 | INSTALLATION, TESTING & COMMISSIONING |
| 207 | Installation & Commissioning of all Pump set,Piping & Valves as mentioned in above |
| 208 | Level Transmitter (For Hi-Lo cut-off & alarms) |
| 209 | SITC of Radar type level transmitter shall be provided in the pump house for measuring the sewage level in wet sump. The indicator shall be digital type showing depth in meters and shall be capable for input to PLC or HMI touch sceen for display. |
| 210 | Electro magnetic flow meter |
| 211 | SITC of CE/UL certified 200 mm dia Electro magnetic flow meter suitable to measure 0 to 30 MLD flow to be fitted in main header line including reducer etc complete.(Ref. upjn SOR) |
| 212 | E.O.T. Crane |
| 213 | SITC of 3 Tonn E.O.T. crane providing, erecting and commissioning single girder electrically operated rectangular over head travelling crane with 6 m lift complete with wire rope hoist, class II duty, all three motions electrically operated by suitable rating motor IP 54, control panel and down pendent control block. (Ref. MJP SOR, 2022) |
| 214 | Chequerred plate and guards |
| 215 | SITC of 3mm thick M.S chequerred plate over all the run of cables trenches to cover properly and M.S. grill and M.S. guard over all pipes ducts and other point where required as per site condition (Ref. UP Jal Nigam, GM Gzb Rate) (3X0.75+3X0.9+7X0.6+1X0.9)X1=10.05sqmm. |
| 216 | PAINTING |
| 217 | Painting of all pumps piping and valves with two coat enamel paint. (Ref.UP Jal Nigam E&M SOR, 2019) |
| 218 | LIGHT WIRING & Electrification |
| 219 | Complete Internal Electrification of LT Panel room with 2 Nos. Exhaust Fan |
| 220 | Complete Internal Electrification of HT Panel room with 2 Nos. Exhaust Fan |
| 221 | IPS Campus with Solar Panel and LED Light |
| 222 | D.G. SET AND ACCESSORIES |
| 223 | SITC of Radiator Cooled and Turbo charged Silent type DG set , engine ,alternator capable of developing 82.5 kVA at 415+6%, 50 Hz AC at 0.85 P.F. lagging and self exciting coupled with suitable BHP diesel engine through flexible coupling and mounted on common base plate complete with fuel tank inside the acousting system and inbuilt control panel, Governor, Manual & electric Start , Batteries with battry charger, Engine instruments panel,AVM pads, All controls for operationof DG set are from outside the enclosure with DG control panel having Microprocessor based Genset monitoring like Running Hour, RPM, Low Lube Oil tripping & control system, Ammeter, Voltmeter, PF meter, frequency meter, KWH meter,digital fuel display meter, Ind.lamps etc. mounted inside enclosure , visible and accessiblefrom outside. T , 3 Met exhaust pipe, D.G. set shall be mounted under open sky resting on the foundation as per design. |
| 224 | Pipe Earthing as per IS:3043- 1987 with 3.0 Mtr. Long, 40 mm dia. ' B ' class G.I. Pipe IS: 1239 (Part-1) 2004, Equivalent to BS : 1387 withperforated holes of 12 mm dia ,including all accessories like nut, bolts,reducer, nipple, wire meshed funnel, and Heavy duty weather proof polypropylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, BottomDia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required. |
| 225 | Plate Earthing as per IS:3043 with copper Earth plate of purity >95% of size 600mm x 600mm x 3.0mm by embodying 3 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/charcoal, testing of earth resistance for value of 5 ohms or less as required. |
| 226 | Supply & Laying 50 mm X 6mm size GI earth strip in horizontal or vertical run in surface by means of Earth strip DMC Insulator including riveting/soldering/ welding, Jointing shall be done by overlapping and with 2 set of Brass (for Cu strip) / GI (for GI Strip) nut bolt & spring washer spaced at 50cm making connection etc. as required. |
| 227 | Providing and Laying cable for DG Set to Panel 95 sq mm X 3.5 core x 1 run( armored aluminium ). |
| 228 | Supplying and making one end termination with heavy duty brass compression gland (as per IS 12943- 1990) SIBG type, heavy duty aluminium lugs (as per IS 8309 - 1993 & IS 8337-1976 ) duly crimped with crimping tool, PVC tape as per PWD specification for electrical Works etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade for 3.5 core X 95 sq mm. |
| 229 | SCREENS AND GATES: |
| 230 | Rising type thimble mounted CI Sluice Gates of reputed make at IPS |
| 231 | Stainless steel Manual Screen with bar size 50 mm x 10 mm. Gaping between bars should be 20 mm. there should be atleast 1 stainless steel punji for cleaning purpose. (1 working + 1 standby) |
| 232 | Packing and Frieght |
| 233 | Installation, Testing and Commissioning |
| 234 | AUTOMATION OF IPS |
| 235 | CE& UL certified PLC/RTU with redundant CPU & power supply in IP 54 enclosure suitable to communicate with GSM based modem unit with redundant CPU & power supply with annalog & digital paramter & features as specified for each ZPS/OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations as specified in tender technical specification including full developed version of scada software with customization of software with laptop/desktop etc to monitor and control the ips from remote places. |
| 236 | GSM/GPRS based wireless communication with 4G modem for RTU/PLC capable to transfer & gather data from remote sites to control stations all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender technical specification. |
| 237 | CE/UL certified intellignet Smart Energy Meter |
| 238 | Auto phase reversal unit with inbuilt time delay & enclosure (confirm to IEC-60947-1 & IEC-60947-b-1)160 AMP rating |
| 239 | Electronic sensor type pressure measuring device suitable for pressure measurements of sewage flow in delivery and common header line. The material of construction of housing and other parts in contact with sewage shall be of stainless steel. These shall be of required protection category and complete with signal transmitting device and digital pressure indicator. |
| 240 | CE/UL Certified Surge protector for control panel. |
| 241 | CE/UL Certified 7\\" HMI touch screen suitable to communication with PLC/RTU for local display & control ofp rocess parameters. |
| 242 | Security Survillance IP Camera with recorder |
| 243 | Installation, commissiong & testing of above automation work |
| 244 | Trial run of automation work for 3 month period for IPS-2 |
| 245 | Three month Expenditure on Operator (IPS-2) in 3 Shift |
| 246 | Diesel Consumption During Trial and Run Period (IPS-2) |
| 247 | STP ( 11.1 MLD ) And Co Treat ment Plant ( 24 KLD )Design, Supply of all Materials, Erection, Testing,Commissioning and 3 month trial run Of Electrical, Mechanical & Instrumentation Equipments at STP (11.10 MLD ) with all required electrical & mechanical works, PLC/SCADA work, electrification & street lighting work and Online Continuous Effluent Monitoring System (OCEMS) etc. all complete as per tender document for STP.The effluent quality for agricultural uses ( PH-6.5 TO 8.3, TSS<20 mg/l, Oil & Greases -10mg/l, BOD- 10mg/l,COD-30 mg/l,Residual Chlorine-nil, TKN-10mg/l, Nitrate-10mg/l, FC-230MPN/100ml Dissolved P-5mg/l (preferable 2mg/l).) shall be maintained as per CPHEEO mannuals Latest NGT norms for effluent discharge shall be adhered. The rate is Considered for SBR Technology. The STP shall be capable to treat the raw sewage having minimum concentration mentiond in CPHEEO mannual. Firm has to complete Design, Supply, Erection, Testing,Commissioning and 3 month trial run of Substation Work like HT Panel, Transformer & its associated equipments and DG Set Work with AMF Panel with considering load of STP, MPS & Co- Treatment Plant. Design, Supply of all Materials, Erection and Commissioning and 3 month Trial Run of Co-Treatment Plant ( 24 KLD ) having manual screen with-SS 304 with bar size (50 mm x 10mm) and gaping 20 mm, Screw Pumps (4 Kl/h 1W+1S), Screw Press Machine (8 KL/H) with double cylinder having VFD for its operation , 1000 Lit. PVC tank for washing screw press machine. all type pipe and fittings, LT panel and cabling material, Dewatering Pumps (1W+ 1S), 5HP Blower with 12 Nos Diffusers etc complete.) |
| 248 | E./M. Works at MPS Electrical WorksH.T.Panel( Comprising with 1 -I/C and 2 -O/G.SITC of Indoor Type Floor mounted HT Panel with 11 KV, 630 Amps 3 phase, 50 Hz Vacuum Circuit Breaker (VCB) Panel Fabricated by System Integrator of VCB Manufacturer as per IEC 62271-1,100,200 Standard made from Powder painted pre-fabricated, CRCA sheet steel /High quality Aluminium-Zinc (Aluzinc) coated sheet steel. Fabrication shall be done through CNC turret press and CNC bending machine having a rupturing capacity of 500 MVA, 26.3 KA breaking capacity for 3 sec, Internal arc type tested for 26.3KA for 1 sec with AFLR clasification with suitable capacity of bus bar connected with the incoming and outgoing panels as per given details-Supply installation testing and commissioning of only TTA Incoming Panel comprising of following: - VCB 630 Amps . VI of VCB should be sealed for 30000 operation. VCB operationg mechanism should be of M2 duty for minimum 10000 mechanical operation. - Closing & tripping coil of VCB should be of continious rating to achive minimal failure. - Resin Cast type CT having Ratio : 400-200A/ 1-1 A, Core1: 5P20, 5 VA; Core 2: 0.5, 5 VA (How ever CT Ratio shall be decided as per load requirement)- VT Ratio: 11KV/1.732/110V/1.732/110V/1.732, -Core 1: 0.5, 20VA should be floor mounted and to be connected from the back side of the panel.- Numerical relay (should be VCB manufacturer's own make) having protections of 50,51, 50N,51N,TCS. The relay shall have programable 4 digital Input , programable 6 Digital Output and programable 4 nos. LED at HMI.- Ammeter with Selectorswitch and Volt meter with Selector switch- Multifunction Meter of Acc Class 0.5, having facility to monitor KW, KVA,KVAR, PF, KWH, KVARH, KVAH, A,V etc.- Trip circuit supervision relay (feature of numerical relay)- LR, TNC switch, indication lamp - CB ON/OFF, spring charge, Auto trip, TCS healthy etc., Space heaters - Power Pack (230V AC- 110V DC) and 8/12 window Annunciator. (Included in STP costing) - Set |
| 249 | Supply Installation Testing and Commissioning of only TTA Outgoing Panel comprising of following: - VCB 630 Amps . VI of VCB should be sealed for 30000 operation. VCBoperationg mechanism should be of M2 duty for minimum 10000 mechanical operation. - Closing & tripping coil of VCB should be of continious rating to achive minimal failure. - Resin Cast type CT having Ratio : 400-200A/ 1-1 A, Core1: 5P20, 5 VA; Core 2: 0.5, 5 VA (How ever CT Ratio shall be decided as per load requirement)- Numerical relay (should be VCB manufacturer's own make) having protections of 50,51, 50N,51N,TCS. The relay shall have programable 4 digital Input, programable 6 Digital Output and programable 4 nos. LED at HMI.- Ammeter with Selectorswitch and Volt meter with Selector switch - Multifunction Meter of Acc Class 0.5, having facility to monitor KW, KVA, KVAR, PF, KWH, KVARH, KVAH, A,V etc.- Trip circuit supervision relay (feature of numerical relay) - LR, TNC switch, indication lamp - CB ON/OFF, spring charge, Auto trip, TCS healthy etc., Space heaters - Power Pack (230V AC- 110V DC) - 2 Sets (Included in STP costing) |
| 250 | Providing & Laying XLPE insulated as per IS:7098/II/85 H.T.cable as per PWD specification for electrical Works for working voltage 11 K.V.(E) in existing RCC / Hume /Stoneware / PVC pipe/ open duct/cable trench, on existing cable trays or on surface etc. including making necessary connection, testing etc. 3 core X 120sq.mm. armored HT Cable (From HT Panel to Transformers) - 60 Meters (Included in STP costing)Trench making and covering of trench in all respect. - 60 Meters (Included in STP costing)SITC of 11 KV End Termination Kit Indoor type (3 core, 120sq.mm) - 4 Sets (Included in STP costing)11 KV, 2.5 mm thick with proof voltage 22 KV / 3 min. and Break DownVoltage 45 KV - 2 Sqm (Included in STP costing) |
| 251 | Transformer: as per suitable capacity in kVA as per combined load of STP, MPS & Cotreatment Plant with Off -LTC (+5% to - 10% @ 2.5%) : S I T C of star rated Copper wound distribution Transformer as per suitable capacity in kVA as per combined load of STP, MPS & Cotreatment Plant at 11/0.433KV Delta-Star Connected, Vector Group Dyn 11,ONAN Cooled & losses as defined as per IS 1180 part I 2014. including standard accessories like conservator, silica gel breather, radiator, fins, HT cable box & LT cable boxes, temperature rise in winding/oil 35-40 degree C, ISI marked drain valve, Dial type Temperature gauge, first filling of transformer oil as per IS :335-1953, Epoxy based paint, including carrying of pre-commission Testing & Charging of Transformer complete in all respect. 02 Nos. (Included in STP costing) |
| 252 | L.T. Panel ( ONLY TTA PANEL) |
| 253 | SITC of 0.415 kV L.T. control panel for pumping plant-L.T. control panel suitable to operated on 415 ± 6 % volt , 3 Phase , 50 Hz, AC supply as per details given below-(A) from transformers to 2 Nos incoming ACB panels and 1 outgoing ACB panel, each consisting of following items -(i) 4 pole Microprocessor based release Draw out type ACB (Motorised charging type) ,630 A Rating ,50 kA- 1 No.(ii) C.Ts of suitable ratio- 1 No.(iii) Ammeter with selector switch - 1 No.(iv) Voltmeter with selector switch- 1 No. (v) Power factor meter(0.5 Lag&0.5Lead) - 1 No.(vi) Frequency meter-1 No.(vii) KWH meter - 1 No. (viii) 2 Pole over current relay& one pole earth fault relay - 1 No.(B)Bus bar chamber having 3 Nos. bus bars for phase and 1 No. bus bar for neutral of suitable size – 1 No. (C) 4 Nos. composite panels for pumping plants, each consisting of following items –(i) 4 pole MCCB 200 A current rating, 25 KA short circuit breaking capacity With magnetic release with adjustable O/L & S/C setting with Inbuilt Instantaneous and Ground fault Protection -1 No.(ii)C.Ts. of suitable ratio- 1 No.(iii)Ammeter with selector switch - 1 No.(iv) Automatic start / stop device according to level in the sump- 1 No.(v)Indicating lamps(Auto/manual/low level/ reverse rotation) - 1 Set (D) 3 Nos. outgoing panels for miscellaneous works, each consisting of following items – (i) MCB of 40 A capacity- 1 No.(ii) C.Ts. of suitable ratio- 1 No. (iii) Ammeter with selector switch - 1 No.(iv) Indicating lamps- 1 Set (E)APFC Panel for total load.(F) 4 pole Microprocessor based release Draw out type (Motorised charging type) ,630 A Rating ,50 kA Panel for DG sets incomer- 1 NO (G) Bus coupler arrangement in panels |
| 254 | LT Cable laying and jointing |
| 255 | Power and control cable-Supply of 400 sq. mm 3.5 core cable - 2Run required for power from each Transformer to each L.T. panel , 185 sq. mm X3 core-1 run cable for power from starters to Motor including lugging and jointing, laying, trench excavation and compaction as well as complete cabling of automation system etc. complete in all respect. |
| 256 | Earthing |
| 257 | Plate Earthing as per IS:3043 with copper Earth plate of purity >95% of size 600mm x 600mm x 3.0mm by embodying 3 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam freelid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensureto enter in measurment book. All as per pre approved by Engineer in charge. Ref.14.3 (PRE BSR 2022) |
| 258 | Pipe Earthing as per IS:3043- 1987 with 3.0 Mtr. Long, 40 mm dia. ' B ' class G.I. Pipe IS: 1239 (Part-1) 2004, Equivalent to BS : 1387 with perforated holes of 12 mm dia ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof polypropylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensure to enter in measurmentbook.All as per pre approved by Engineer in charge. Ref.14.1 (PRE BSR 2022) |
| 259 | Supply & Laying of 50mmX6mm size GI earth strip in horizontal or vertical run in ground/surface/recess including riveting,soldering, saddles, Jointing shall be done by overlapping and with 2 set of GI nut bolt & spring washer spaced at 50cm making connection etc.(20meter for each earthing) Ref.E140611 (PRE BSR 2021) |
| 260 | Charges of Electrical safety Clearance |
| 261 | Expenditure on B&L Form, Challan etc. |
| 262 | Proper fencing of substation portion as per I.E. rules. |
| 263 | STARTER PANEL |
| 264 | SITC of Variabale Frequency Drive , suitable to meet the basic requirement of motor protections and suitable to run 70 HP motor (To be fixed in composite panel of LT Panel |
| 265 | Mechanical Works PumpsThe submersible non clog pumpset should be single stage having two vanes enclosed impeller coupled with submersible motor of 70 HP Rating 400 Volt ±10%,3 phase 50 Hz, solid handling capacity 125mm, suitable to pump raw sewage with an specific gravity 1.03 having following construction of material with 20 Met. cable as offered. (4W+2S)Casing-2% Ni Cl. IS.210 grade F.G.220 with hardness 275 BHN.Impeller-Stainless steel CF-8Mshaft-stainless steel AISI-410Discharge of pump= 8900 lpmTotal Head= 20 MSpeed=980Quantity of pumps.Guid Rail SystemGuide rail system (Automatic coupling system) for 70 HP submersible pump sets complete for above pump set. 4 Sets (included in pump rate)Lifting Chain , MOC- alloy steel, lifting chain with oval ring @ 1m & with D/Bow shackle - 4 Sets (included in pump rate) |
| 266 | Main piping and Valves.Main piping and valves 300 mm dia delivery, 450 mm dia common header line.Valves.Confirming to IS 780/2906 or as applicable PN rating- 1.0Type of liquid to be handled-potable waterMaterial of constructionBody-CI,IS-210 grade FG 200Wedge-CI IS210 Grade FG200Spindle-Stainless steel AISI304Sheet and face Ring-SS ASTMA 743 Grade C.F.8 MChannel& Shoe-S.S.AISI,.304Drain& Air plug-S.S.AISI.304Bushing arrangement-Halprene on bronzeRivets-AISI:304Fasteners-MSMotor Operated Sluice Valves |
| 267 | Motor Operated Sluice Valve 300 mm dia |
| 268 | Motor Operated Sluice Valve 450 mm dia |
| 269 | Reflux Valve |
| 270 | Reflux valve 300 mm dia N.B. |
| 271 | PipingsNote : Regarding the size of pipes, Tee, Bend etc, contrctor is required to designed them self and may got it approved by the department before execution of works along with layout drawing taking 300mm pipe 40m and 450 mm pipe 15m |
| 272 | 300 mm, K9 delivery pipes for all six pumping plant |
| 273 | 450 mm, K9 common header pipes |
| 274 | Specials like bend, tee, D Joint etc. |
| 275 | Nut Bolt, Washer Rubber packing etc |
| 276 | INSTALLATION, TESTING & COMMISSIONING |
| 277 | Installation & Commissioning of all 4 Nos. Pump set,Piping & Valves as mentioned in above |
| 278 | Level Transmitter (For Hi-Lo cut-off & alarms) |
| 279 | SITC of Radar type level transmitter shall be provided in the pump house for measuring the sewage level in wet sump. The indicator shall be digital type showing depth in meters and shall be capable for input to PLC or HMI touch sceen for display. |
| 280 | Electro magnetic flow meter |
| 281 | SITC of CE/UL certified 400 mm dia Electro magnetic flow meter suitable to measure 0 to 40 MLD flow to be fitted in 400 mm dia main header line. |
| 282 | E.O.T. Crane |
| 283 | SITC of 3 Tonn E.O.T. crane providing, erecting and commissioning single girder electrically operated rectangular over head travelling crane with 6 m lift complete with wire rope hoist, class II duty, all three motions electrically operated by suitable rating motor IP 54, control panel and down pendent control block. |
| 284 | Chequerred plate and guards |
| 285 | SITC of 3mm thick M.S chequerred plate over all the run of cables trenches to cover properly and M.S. grill and M.S. guard over all pipes ducts and other point where required as per site condition (Ref. UP Jal Nigam, GM Gzb Rate) (3X0.75+3X0.9+7X0.6+1X0.9)X1=10.05sqmm. |
| 286 | PAINTING |
| 287 | Painting of all pumps piping and valves with two coat enamel paint. |
| 288 | LIGHT WIRING & Electrification |
| 289 | Complete Internal Electrification of LT Panel room with 2 Nos. Exhaust Fan |
| 290 | Complete Internal Electrification of HT Panel room with 2 Nos. Exhaust Fan |
| 291 | MPS Campus with Solar Panel and LED Light of 4 sets. |
| 292 | D.G. SET AND ACCESSORIES |
| 293 | SITC of Radiator Cooled and Turbo charged Silent type DG set , engine ,alternator capable of developing suitable capacity in kVA as per combined load of STP, MPS & Cotreatment Plant with 415+6%, 50 Hz AC at 0.85 P.F. lagging and self exciting coupled with suitable BHP diesel engine through flexible coupling and mounted on common base plate complete with fuel tank inside the acousting system and inbuilt control panel, Governor, Manual & electric Start , Batteries with battry charger, Engine instruments panel,AVM pads, All controls for operationof DG set are from outside the enclosure with DG control panel having Microprocessor based Genset monitoring like Running Hour, RPM, Low Lube Oil tripping & control system, Ammeter, Voltmeter, PF meter, frequency meter, KWH meter,digital fuel display meter, Ind.lamps etc. mounted inside enclosure , visible and accessiblefrom outside. T , 3 Met exhaust pipe, D.G. set shall be mounted under open sky resting on the foundation as per design. - 1 Set (Included in STP costing) |
| 294 | SITC of PLC Based Auto main failure (AMF) Panel for above DG Set fabricated from CRCA sheet steel 2 mm Thick , Powder coated finish , Engine Start & Stop commands, control Relays , Ammeter & Voltmeter with selector switches, Control & 2 nos 4 pole Power Contactors with 2 no. of required size 4 pole MCCB, Timers, Electronic Hooter ,Visual & Alarm indication for faults, operator interface panel complete in all respect. 1 Set (Included in STP costing) |
| 295 | Pipe Earthing as per IS:3043- 1987 with 3.0 Mtr. Long, 40 mm dia. ' B ' class G.I. Pipe IS: 1239 (Part-1) 2004, Equivalent to BS : 1387 withperforated holes of 12 mm dia ,including all accessories like nut, bolts,reducer, nipple, wire meshed funnel, and Heavy duty weather proof polypropylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required. 02 Job (Included in STP costing) |
| 296 | Plate Earthing as per IS:3043 with copper Earth plate of purity >95% of size 600mm x 600mm x 3.0mm by embodying 3 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/charcoal, testing of earth resistance for value of 5 ohms or less as required. 02 Job (Included in STP costing) |
| 297 | Supply & Laying 50 mm X 6mm size GI earth strip in horizontal or vertical run in surface by means of Earth strip DMC Insulator including riveting/soldering/ welding, Jointing shall be done by overlapping and with 2 set of Brass (for Cu strip) / GI (for GI Strip) nut bolt & spring washer spaced at 50cm making connection etc. as required. 40 Meter (Included in STP costing) |
| 298 | Providing and Laying cable for DG Set to Panel 400 sq mm X 3.5 core x 2 run( armored aluminium ) - 50 Meter (Included in STP costing) |
| 299 | Supplying and making one end termination with heavy duty brass compression gland (as per IS 12943- 1990) SIBG type, heavy duty aluminium lugs (as per IS 8309 - 1993 & IS 8337-1976 ) duly crimped with crimping tool, PVC tape as per PWD specification for electrical Works etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade for 3.5 core X 400 sq mm. - 08 Jobs (Included in STP costing) |
| 300 | SCREENS AND GATES: |
| 301 | Rising type thimble mounted CI Sluice Gates of reputed make at MPS |
| 302 | Multirake type Stainless steel ( SS-304), Mechanical Coarse Bar Screen-20 mm gaping), Ultrasonic type differential level sensor, control panel for coarse bar screens, belt coveyor etc. complete in all respect |
| 303 | Stainless steel Manual Screen (20 mm gaping), bar size- 50 mm x 10 mm, with stainless steel punji |
| 304 | Packing and Frieght |
| 305 | Installation, Testing and Commissioning |
| 306 | AUTOMATION OF MPS |
| 307 | CE& UL certified PLC/RTU with redundant CPU & power supply in IP 54 enclosure suitable to communicate with GSM based modem unit with redundant CPU & power supply with annalog & digital paramter & features as specified for each ZPS/OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations as specified in tender technical specification including full developed version of scada software with customization of software with laptop/desktop etc to monitor and control the ips from remote places. |
| 308 | GSM/GPRS based wireless communication with 4G modem for RTU/PLC capable to transfer & gather data from remote sites to control stations all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender technical specification. |
| 309 | CE/UL certified intellignet Smart Energy Meter |
| 310 | Auto phase reversal unit with inbuilt time delay & enclosure (confirm to IEC-60947-1 & IEC-60947-b-1)160 AMP rating |
| 311 | Electronic sensor type pressure measuring device suitable for pressure measurements of sewage flow in delivery and common header line. The material of construction of housing and other parts in contact with sewage shall be of stainless steel. These shall be of required protection category and complete with signal transmitting device and digital pressure indicator. |
| 312 | CE/UL Certified Surge protector for control panel. |
| 313 | CE/UL Certified 7\\" HMI touch screen suitable to communication with PLC/RTU for local display & control ofp rocess parameters. |
| 314 | Security Survillance IP Camera with recorder |
| 315 | Installation, commissiong & testing of above automation work |
| 316 | Trial run of automation work for 3 month period for MPS |
| 317 | Three month Expenditure on Operator (MPS) in 3 Shift |
| 318 | Diesel Consumption During Trial and Run Period (MPS + STP) Please Enable Macros to View BoQ information |