|
| 1 | Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth, for foundation, etc in hard/dense soil and getting out complete all as speicied and directed. |
| 2 | Returning, filling in, including spreading, leveling, watering and well ramming in layer not exc 25 cm with soil obtained from excavation complete all as speicied and directed. |
| 3 | Removing excavated material (Soil) not exc 50 mtr and depositing where directed at a level not exc. 1.5 m above the starting point complete all as speicied and directed. |
| 4 | Taking down old unserviceable 100mm bore, CI water mains (including all fittings) with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed. |
| 5 | Taking down old unserviceable 150mm bore, CI water mains (including all fittings) with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed. |
| 6 | Taking down old unserviceable 200mm bore, CI water mains (including all fittings) with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed. |
| 7 | S&F, in replacement of cast iron sluice valve 150 mm dia with flanged ends class PN-1.6 with iron wheel, stainless steel spindle and check nut confirming to IS :780 including all jointing materials such as nuts, bolts, washers and gaskets etc. complete all as specified & directed . |
| 8 | S&F, in replacement of cast iron sluice valve 100 mm dia with flanged ends class PN-1.6 with iron wheel, stainless steel spindle and check nut confirming to IS :780 including all jointing materials such as nuts, bolts, washers and gaskets etc. complete all as specified & directed . |
| 9 | S&F, in replacement of cast iron sluice valve 80 mm dia with flanged ends class PN-1.6 with iron wheel, stainless steel spindle and check nut confirming to IS :780 including all jointing materials such as nuts, bolts, washers and gaskets etc. complete all as specified & directed . |
| 10 | Repair and servicing of sluice valve of 150mm incl renewal of perished rubber gasket, material washer, spindle, valves seating gland packing check nuts of gun metal, gun metal couplings washers, etc to make leak proof compleatly incl testing all as specified. |
| 11 | Repair and servicing of sluice valve of 100mm incl renewal of perished rubber gasket, material washer,spindle, valves seating gland packing check nuts of gun metal, gun metal couplings washers, etc to make leak proof compleatly incl testing all as specified. |
| 12 | Repair and servicing of sluice valve of 80mm incl renewal of perished rubber gasket, material washer,spindle, valves seating gland packing check nuts of gun metal, gun metal couplings washers, etc to make leak proof compleatly incl testing all as specified. |
| 13 | S&F in replacement of 150mm bore, cast iron, reflux valve (non return valve) with flanged ended with rubber gasket and nut bolts complete all as specified and directed. |
| 14 | Supply and fixing of Ductile Iron pipe with spigot and socket ends, suitable for tyton joints, class K-9 laid in trenches, or under floors or fixed to walls, for size of 200 mm bore of pipe complete all as specified and directed. |
| 15 | Supply and fixing of Ductile Iron pipe with spigot and socket ends, suitable for tyton joints, class K-9 laid in trenches, or under floors or fixed to walls, for size of 150 mm bore of pipe complete all as specified and directed. |
| 16 | Supply and fixing of Ductile Iron pipe with spigot and socket ends, suitable for tyton joints, class K-9 laid in trenches, or under floors or fixed to walls, for size of 100 mm bore of pipe complete all as specified and directed. |
| 17 | M&L for cutting of Road/PCC path, hard standing depth not less than 60cm and width not less than 45cm for laying water supply pipe and making good the existing surface with PCC (1:2:4) type B-2 of 150mm thick complete all as specified and directed by Engr-in charge |
| 18 | M&L for horizontal drilling, in any type of soil, using trenchless technology suitable for insertion of CI/GI/DI pipe complete all as specified and directed for size of 200mm bore for 100m pipe complete all as specified and directed. |
| 19 | M&L for horizontal drilling, in any type of soil, using trenchless technology suitable for insertion of CI/GI/DI pipe complete all as specified and directed for size of 250mm bore for 150m pipe complete all as specified and directed. |
| 20 | Repairs / rewinding of centrifugal motor of cap 3 HP 3Phase, 415 Volt, by removing burnt winding and rewinding with super enamelled copper winding wire with same as existing turn & gauge to achieve desired including replacement of bearings complete and couple with the existing pump and testing complete as per directed by Engr-in-charge. |
| 21 | M&L in replacement of Terminal plate cover made of CI terminal plate for 60/120 HP centrifugal motor ,best quality including dismantling/taking out of unserviceable terminal plate of any make and type complete all as speicied and directed. |
| 22 | Attended the complaint of Star delta starter any type /make capacity 60 HP including replacement of U/S parts sch as over load relay/contracter/single phase preventer and wiring as required to made the starter serviceable condition complete all as speicied and directed.(Note : Spare parts shall be measured and paid separatly ) |
| 23 | Replacement of Sparekit unit for ML-4 contactor 66-110 Amps complete fixed in repairs all as specified and directed. |
| 24 | Replacement of Over load relay for ML-4 contactor of relay range 66-110 Amps complete fixed in repairs all as specified and directed. |
| 25 | Replacement of Timer switch unit star- delta starter 60 HP complete all as speicied and directed. |
| 26 | M&L in replacement of Electronic motor protection relay to protect the motor against over load phase loss, phase unbalance, phase reversal and stalling in single compact unit with field sutaible time and current rating, suitable for 20 to 60 HP motors complete all as speicied and directed. |
| 27 | DOL starter suitable for 3 HP to 7.5 HP electric motor, 3 phase, 415 volts, 50 c/s including dismantling/taking out of unserviceable starter of any make and type complete all as specified and directed. |
| 28 | M&L for DI Specials and fittinng as per IS for spigot and socketed DI pipes for water mains, branches, links such as bends(any type), reducers and angles, tappers any type, bends increasing/ decreasing or double sockets etc. Tee pieces, single branches, double branches (all socket and spigots) collers, cap and plug suitable for pipelines upto 250 mm bore complete all as specified and directed. |
| 29 | Cleaning of Semi UG sumps by scraping the inner walls of sumps & cleaning with wire brush , taking out all dirt , scales etc and white washing the wall with two coats of lime after cleaning walls from inside by chlorine for disinfection including writing on UG Sump on black painted background with white paint the date of cleaning all as specified and directed by Engr-In-Charge for the capacity of 100000 Glns complete all as specified and directed. |
| 30 | Cleaning of Semi UG sumps by scraping the inner walls of sumps & cleaning with wire brush , taking out all dirt , scales etc and white washing the wall with two coats of lime after cleaning walls from inside by chlorine for disinfection including writing on UG Sump on black painted background with white paint the date of cleaning all as specified and directed by Engr-In-Charge for the capacity of 200000 Glns complete all as specified and directed. |
| 31 | Cleaning of Semi UG sumps by scraping the inner walls of sumps & cleaning with wire brush , taking out all dirt , scales etc and white washing the wall with two coats of lime after cleaning walls from inside by chlorine for disinfection including writing on UG Sump on black painted background with white paint the date of cleaning all as specified and directed by Engr-In-Charge for the capacity of 300000 Glns complete all as specified and directed. |
| 32 | Cleaning of Over head reservoirs of capacity 40,000/50000gallon 18 Mtr staging by scraping the inner walls of OHR & cleaning with wire brush, taking out all dirt, scales etc and white washing the wall with two coats of lime after cleaning walls from inside by chlorine for disinfection and including writing on tank on black painted background with white paint the date of cleaning all as specified and directed by Engr-In-Charge for the capacities:- |
| 33 | S&F in replacement of column pipe made out of GI heavy grade size 100mm bore of 3 Mtr length each, in single piece, having MS flanges welded to both ends and including rubber gasket 5mm thick with bolt nut/washers of appropirate size/length complete all as specified and directed. |
| 34 | S&F in replacement of column pipe made out of GI heavy grade size 80mm bore of 3 Mtr length each, in single piece, having MS flanges welded to both ends and including rubber gasket 5mm thick with bolt nut/washers of appropirate size/length complete all as specified and directed. |
| 35 | M&L for Lifting of UNSV submersible pump and motor (20 HP to 45 HP) complete set along with column pipe, safety rope and cable Approx 100 mtr depth with the help of employing chain pulley block and other T&P items all as specified and directed by Engr-in-Charge. |
| 36 | M&L for Lowering of submersible pump and motor (20 HP to 45 HP capacity) into 100 mtr deep bore well after connecting the cable and water proof cable joint and replacing of rubber gasket, nut and bolts and washers and fixing of protection clamp all as directed by Engr-in-Charge Please Enable Macros to View BoQ information |
| 37 | M&L for Lowering of submersible pump and motor (20 HP to 45 HP capacity) into 100 mtr deep bore well after connecting the cable and water proof cable joint and replacing of rubber gasket, nut and bolts and washers and fixing of protection clamp all as directed by Engr-in-Charge Please Enable Macros to View BoQ information |