|
| 1 | Supplying and replacing MNX three pole power contactors {L&T MNX Power Contactors 415V AC (3 Pole)}/ Siemens/Metasol make 3 Pole, 3 Phase, AC (AC magnetic contactor, suitable for use with 3TF series motor control systems) for motor starter: |
| 2 | MNX 9 |
| 3 | MNX 12 |
| 4 | MNX 18 |
| 5 | MNX 25 |
| 6 | MNX 40 |
| 7 | MNX 140 |
| 8 | MNX 185 |
| 9 | MNX 225 |
| 10 | MNX 300 |
| 11 | MNX 400 |
| 12 | MNX 550 |
| 13 | MNX 650 |
| 14 | SIEMENS - 3TF51 |
| 15 | SIEMENS - 3TF53 |
| 16 | LS Make MC - 225 a/4 |
| 17 | Supplying, erecting & marking MCB with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board: |
| 18 | 25 AMP 415 Volt mark |
| 19 | 32 AMP 415 Volt ISI mark |
| 20 | 40 AMP 415 Volt Isl mark |
| 21 | 63 AMP 415 Volt ISI mark |
| 22 | 125 AMP 415 Volt ISI mark |
| 23 | 200 AMP 415 Volt ISI mark |
| 24 | Supplying and erecting electrical control panel electrical components: |
| 25 | INDICATOR R, Y, B MAKE- TECNIC, 22.5 mm |
| 26 | VOLT METR, range 0 - 500 volts, 96x96 |
| 27 | CT OPERATED AMMETER, range 0 - 200 amp., 96x96 |
| 28 | ROTARY SWITCH RYB AMP./VOLTMETER |
| 29 | C- channel |
| 30 | Rewinding of electric motor of all types and makes with copper wire, overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc.: |
| 31 | Upto 10 HP |
| 32 | Upto 20 HP |
| 33 | Upto 40 HP |
| 34 | Upto 100 HP |
| 35 | Upto 150 HP |
| 36 | Upto 250 HP |
| 37 | Upto 350 HP |
| 38 | Upto 450 HP |
| 39 | Supplying and replacing No-Volt-Coil for motor having DOL starter and Star-Delta Starter from: |
| 40 | Upto 15 HP |
| 41 | Upto 30 HP |
| 42 | Upto 90 HP |
| 43 | Upto 125 HP |
| 44 | Supplying, erecting & terminating XLPE insulated unarmoured cable 1100 V aluminium conductor complete erected with lugs, on wall/ trusses/pole or laid in provided trench/ pipe: |
| 45 | 2CX10 SQMM |
| 46 | 4CX10 SQMM |
| 47 | 4CX16 SQMM |
| 48 | 4CX25 SQMM |
| 49 | 4CX35 SQMM |
| 50 | 4CX50 SQMM |
| 51 | 3.5CX70 SQMM |
| 52 | 3.5CX95 SQMM |
| 53 | 3.5CX120 SQMM |
| 54 | 4CX70 SQMM |
| 55 | 4CX95 SQMM |
| 56 | 4CX120 SQMM |
| 57 | 4CX150 SQMM |
| 58 | 4Cx180 SQMM |
| 59 | 4CX240 SQMM |
| 60 | 4CX300 SQMM |
| 61 | Supplying, erecting & terminating XLPE insulated unarmoured cable 1100 V copper conductor complete erected with provided lugs, laid in provided control panel /distribution boards / pipe: |
| 62 | 1CX25 SQMM |
| 63 | 1CX35 SQMM |
| 64 | 1CX50SQMM |
| 65 | 2CX2.5 SQMM |
| 66 | 2CX4 SQMM |
| 67 | 2CX6 SQMM |
| 68 | 2CX10 SQMM |
| 69 | 3CX2.5 SQMM |
| 70 | 3CX4 SQMM |
| 71 | 3CX6 SQMM |
| 72 | 3CX10 SQMM |
| 73 | 4CX4 SQMM |
| 74 | 4CX6 SQMM |
| 75 | 4CX10 SQMM |
| 76 | Providing & erecting epoxy straight through joint outdoor/indoor for LTXLPE armoured cable with necessary material: |
| 77 | 2.5 to 16 sq. |
| 78 | 25 to 50 sq. |
| 79 | 70 to 95 sq. |
| 80 | 120 to 185 sq. mm. |
| 81 | 240 sq. mm. |
| 82 | 300 sq. mm. |
| 83 | 400 sq. mm. |
| 84 | Supplying & erecting crimping type copper lugs for cable complete: |
| 85 | Upto 50 sqmm |
| 86 | Upto 70-120 sqmm |
| 87 | Upto 150-300 sqmm |
| 88 | 400 sqmm |
| 89 | Supplying , erecting & terminating XLPE insulated, galvanised steel formedwire armoured (strip) cable 11 kV(UE), aluminium conductor laid in provided trench / pipe: |
| 90 | Supplying , erecting & terminating XLPE insulated, galvanised steel formedwire armoured (strip) cable 11 kV(UE), 3 x 150 sq. mm. aluminiumconductor laid in provided trench / pipe |
| 91 | Supplying , erecting & terminating XLPE insulated, galvanised steel formedwire armoured (strip) cable 11 kV(UE), 3 x 185 sq. mm. aluminiumconductor laid in provided trench / pipe |
| 92 | Supplying , erecting & terminating XLPE insulated, galvanised steel formedwire armoured (strip) cable 11 kV(UE), 3 x 240 sq. mm. aluminiumconductor laid in provided trench / pipe |
| 93 | Supplying , erecting & terminating XLPE insulated, galvanised steel formedwire armoured (strip) cable 11 kV(UE), 3 x 300 sq. mm. aluminiumconductor laid in provided trench / pipe |
| 94 | Supplying , erecting & terminating XLPE insulated galvanised steel formedwire armoured (strip) cable 11 kV(UE), 3 x 400 sq. mm. aluminiumconductor laid in provided trench / pipe |
| 95 | Providing & erecting epoxy straight through joint outdoor/indoor for LTXLPE armoured cable with necessary material: |
| 96 | 2.5 to 16 sq. |
| 97 | 25 to 50 sq. |
| 98 | 70 to 120 sq. |
| 99 | 150 to 185 sqm. |
| 100 | 240 to 300 sqm. |
| 101 | 400 sqm. |
| 102 | Providing and erecting Heat shrinkable indoor termination kit for 11 kV ( E )XLPE HT cable with necessary material: |
| 103 | Providing and erecting Heat shrinkable indoor termination kit for 11 kV ( E )Providing and erecting Heat shrinkable indoor termination kit for 11 kV(UE)/22 kV ( E ) XLPE HT cable 3x up to 95 sq. mm. with necessarymaterial |
| 104 | Providing and erecting Heat shrinkable indoor termination kit for 11 kV(UE)/ 22 kV ( E ) XLPE HT cable 3x120 to 185 sq. mm. with necessarymaterial |
| 105 | Providing and erecting Heat shrinkable indoor termination kit for 11 kV(UE)/ 22 kV ( E ) XLPE HT cable 3x240 to 400 sq. mm. with necessarymaterial |
| 106 | Providing and erecting Heat shrinkable out door termination kit for 11 kV(UE)/ 22 kV ( E ) XLPE HT cable 3x up to 95 sq. mm. with necessarymaterial |
| 107 | Providing and erecting Heat shrinkable outdoor termination kit for 11 kV(UE)/ 22 kV ( E ) XLPE HT cable 3x120 to 185 sq. mm. with necessarymaterial |
| 108 | Providing and erecting Heat shrinkable outdoor termination kit for 11 kV(UE)/ 22 kV ( E ) XLPE HT cable 3x240 to 400 sq. mm. with necessarymaterial |
| 109 | Providing and erecting Heat shrinkable straight through joint kit for 11 kV(UE)/22 kV ( E ) XLPE HT cable 3x up to 95 sq. mm. with necessarymaterial as |
| 110 | Providing and erecting Heat shrinkable straight through joint kit for 11 kV(UE)/22 kV ( E ) XLPE HT cable 3x120 to 185 sq. mm. with necessarymaterial |
| 111 | Providing and erecting Heat shrinkable straight through joint kit for 11 kV(UE)/22 kV ( E ) XLPE HT cable 3x240 to 300 sq. mm. with necessarymaterial |
| 112 | Providing and erecting Heat shrinkable straight through joint kit for 11 kV(UE)/ 22 kV ( E ) XLPE HT cable 3x 400 sq. mm. with necessary material |
| 113 | Fault detection and repairing of MCC panel and ATS panel: |
| 114 | Fault detection and repairing of MCC panel and ATS panel as per site requirement (labour part only) |
| 115 | Sub Stations (SS) works: |
| 116 | Supply of transfomer oil |
| 117 | Overhauling of 200 KVA transformer |
| 118 | Overhauling of 800 KVA transformer |
| 119 | Overhauling of 1000 KVA transformer |
| 120 | Supplying and erecting 11 kV outdoor type gang operated air break, triplepole switch 200 A capacity with 3 post pin type insulator per phase,mounted in horizontal or vertical position with necessary channels on providedcross arm with adequate length of \\"C\\" class G.l. pipe for operating handleerected on extended square shaft. The operating handle provided with lockand key at suitable height from ground level with necessary clamp. |
| 121 | Supplying and erecting 11 kV outdoor type gang operated air break, triplepole switch 400 A capacity with 3 post pin type insulator per phase,mounted in horizontal or vertical position with necessary channels on providedcross arm with adequate length of \\"C\\" class G.l. pipe for operating handleerected on extended square shaft. The operating handle provided with lockand key at suitable height from ground level with necessary clamp. |
| 122 | Supplying and erecting, 11 kV outdoor type drop out fuse with insulatorcomplete with fuse holders, fuse barrel with metal fitting, fuse elementmounted on M.S. channel with working current of 15A capacity completeerected on provided cross arm. |
| 123 | Supplying and erecting fencing of section having size 2450 mm in height fromground level and 1200 mm width with angle iron frame work erected in CCfoundation and painted complete as per specification no SS-AS/FSG |
| 124 | Supplying and erecting 50 x 50 x 6 mm angle iron as corner support 2m longfixed at the middle of the fencing frame and the other side inclined at 30 degreeangle, in cement concrete foundation of 15 x 15 x 40 cm complete duly paintedwith one coat of red oxide and two coats aluminium paint complete. |
| 125 | Supplying and erecting double leaf hinged door each 1500 mm in width x 1850mm in height using B class, GI pipe with angle iron supports, chain link wiremesh (jali) complete supported on channel iron, erected in foundation, and paintedcomplete |
| 126 | Supplying & erecting barbed wire two ply with 12 SWG ply and 12 SWG barbwith a gap between two bars of 75 mm. firmly fixed on provided angle supportswith necessary materials complete. (6.044 meters/kg.). |
| 127 | Transportation of 11/22 kV transformer above 315 kVA to 1000 kVA withoutloading & unloading (for handing over to section store/ repair works only) |
| 128 | Dismantling the existing distribution transformer of any capacity from theplinth / foundation safely without any damages. |
| 129 | Dismantling existing DO / AB switch set complete from D.P. structure in anapproved manner. |
| 130 | Supplying and erecting 11 kV fuse barrel with metal fittings complete. |
| 131 | Supplying and erecting hard drawn copper solid wire no. 0 to 6 SWGcomplete erected for connections on H.T. sides. |
| 132 | Supplying and erecting extra thick alkathene pipe 10 mm dia. erected toenclose bare conductor wires complete.. (use shall be restricted to H.T.) |
| 133 | Supplying heavy duty operating rod, outer dia 25 mm & inner dia 20 mmsuitable for 11 kV with brass couplings etc. for removing drop out fuses at 6meters length, 4 pieces each with rain shade with hand grip including earthlingchain 1.5m complete. |
| 134 | Supplying and erecting copper tubular bus 20 mm dia 1.6 mm (16 SWG) thickfor the use of high tension over head bus and erected on provided HTinsulators with clamps, nuts and bolts complete. (weight per meter of bus isabout 1.7 kg.) |
| 135 | Supplying and erecting clamps, made out of 25x3 mm, copper strips to befixed to tubular bus for connecting the bare copper wire to other equipment, withbrass nuts bolts of suitable dia complete. |
| 136 | Supplying and erecting anti climbing devices, fabricated from pole clamps ofMS flat 40x5 mm, with drooping spikes 15 cm. in length, welded to it and erectedon pole complete. |
| 137 | Supplying and fixing PVC synthetic elastomer electrically insulating matwith class B insulation conforming to IS: 15652 – 2006 having 2.5 mm thicknessup to 11 kV |
| 138 | Supplying , erecting Indoor LED Fittings: |
| 139 | Supplying and erecting CRCA powder coated corridor/passage light LEDfitting (4 feet) Max. 17W with high transitivity diffuser with system lumensoutput of Min. 2000 lumens , min. efficacy of 120 lumen/W, CRI>80, CCTupto 6500K, Beam Angle of 120 deg., Ripple<5%, THD<10%, p.f. >0.95,operating range of 120-270V, surge protection of 4 kV, Life class of 50,000 Hrs.at L70B50, including driver, with end caps on provided PVC Block / woodenboard with 3 years warranty. |
| 140 | Supplying , erecting Outdoor LED Fittings: |
| 141 | Supplying and erecting integrated LED flood light fitting Max. 100W IP65 &IK07 class having pressure die-cast aluminium housing, having system lumensoutput of Min. 12000 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCTupto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surgeprotection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with Ushaped bracket with 3 Years warranty |
| 142 | Supplying and erecting integrated LED flood light fitting Max. 195W IP65 &IK07 class having pressure die-cast aluminium housing, having system lumensoutput of Min. 23400 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCTupto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surgeprotection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with Ushaped bracket with 3 Years warranty |
| 143 | Supplying , erecting point wiring and MCBDBs: |
| 144 | Point wiring for independent plug in 20 mm FRLS grade HMS PVC conduitwith 1.5 sq.mm (2+1E) FRLSH grade copper wire, flush type switch, earthingand required accessories as per specification No: WG-PW/SW |
| 145 | Supplying & erecting triple pole and neutral distribution board (TPNDB),SPMCB of 8 ways / phase (24 poles), with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) |
| 146 | Supplying , erecting Cable Enclosures / Excavation and Earthing: |
| 147 | Supplying and erecting iron work, sheet metal work consisting of CRCAsheets, various sections of iron, plates, chequered plates, rods, bars, MSpipes, etc. for panel board or any other purpose with bending, cutting, drillingand welding complete erected at the position with necessary materials dulypainted with one coat of red oxide and two coats of enamel paint to match theswitchgears or as per directions by the authority. |
| 148 | Supplying and laying (including excavation of suitable width & depth up to 90 cm)120 mm outside dia. double wall corrugated pipes (DWC) of HDPE forenclosing cable below ground/road surface, to required depth complete. |
| 149 | Supplying and laying (including excavation of suitable width & depth up to 90 cm)160 mm outside dia, double wall corrugated pipes (DWC) of HDPE forenclosing cable below ground/road surface, to required depth complete. |
| 150 | Supplying and laying (including excavation of suitable width & depth up to 90 cm)200 mm outside dia, double wall corrugated pipes (DWC) of HDPE forenclosing cable below ground/road surface, to required depth complete. |
| 151 | Excavating hard Rock or bituminous road by chiselling for preparing pit forpole / stay/earth plate / for laying cable/ pipe & clearing the site by removingdebris & making the site as required complete. |
| 152 | Excavating hard murum / stone metal road by chiselling for preparing pit forpoles stay or earth plates or for laying cables, pipes & clearing the site byremoving debris & making the site as required complete. |
| 153 | Excavating soft murum / soft soil road by chiselling for preparing pit for polesstay or earth plates or for laying cables, pipes & clearing the site by removingdebris & making the site good complete. |
| 154 | Supplying & laying (including excavation) half round reinforced cementconcrete pipe of IS 458:2003 NP-2 class of 250 mm internal diameter in properline, level and slope including providing and fixing collars in cement mortar 1:2and curing etc. complete. |
| 155 | Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm withfunnel with a wire mesh for watering and brick masonry block C.l. covercomplete with all materials, testing & recording the results |
| 156 | Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rodcomplete with all materials testing and recording the results |
| 157 | Supplying, installation and testing of maintenance free earthing comprising ofElectrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecularcopper bonded earthing rod of Length 3m along with 25 kg Carbon basedenvironment friendly back fill ground enhancing compound required to fill up theexcavated earth with required quantity complete, and recording the results |
| 158 | Providing earthing with copper earth plate size 60 x 60 x 0.315 cm with funnelwith a wire mesh for watering and brick masonry block C.l. cover with minimum25 kg Carbon based environment friendly back fill Ground Enhancing compoundcomplete with all materials, testing & recording the results |
| 159 | Supplying and erecting GI strip of high purity required size used for earthing onwall and/or any other purpose with necessary GI clamps fixed on wall paintedwith bituminous paint with joints required. |
| 160 | Service charges for Manpower of Services: |
| 161 | Service charges for Manpower of Helper Services |
| 162 | Service charges for Manpower of Skilled Electrician Services |
| 163 | Supply and installation of Lifting tools and tackels: |
| 164 | Manual chain pulley block with trolly (capacity- 5 Tonnes) |
| 165 | Electrical hoist of capacity- 5 Tonnes with trolley |
| 166 | Supply and installation of Steel Poles: |
| 167 | Supplying and erecting steel tubular swaged pole 139.7 x 114.3 x 88.9 mm diawith 4.5x3.65x3.25 mm thickness (4.5+1.75+1.75 m) length respectively andtotal 8.0 m long with pole cap, base plate in provided foundation. (weight 101 kg) |
| 168 | Supply and installation of Accessories for Outdoor Fittings: |
| 169 | Supplying and erecting Street light bracket for erection of Double fittingmade from 40 mm. dia ‘B’ class G.I. pipe 1.0 m. in length along with pole capof 300 mm length 100 mm dia duly welded |
| 170 | Supply and installation of WIRING: |
| 171 | Supplying and erecting mains with WP 2 x 6 sq. mm. 1100 V. grade aluminiumPVC insulated and PVC sheathed wires on G.I. bearer wire No. 8 SWGcomplete erected with required size of porcelain reel insulators and 16 SWGG.I. binding wire. |
| 172 | Supplying and erecting mains with WP 2 x 4 sq. mm. 1100 V grade aluminiumPVC insulated and PVC sheathed wires on G.I. bearer wire No. 8 SWGcomplete erected with required size of porcelain reel insulators and 16 SWGG.I. binding wire. |
| 173 | Point wiring in for light/fan/bell in 20 mm metal conduit with 1.5 sq.mm(2+1E) FRLSH grade copper wire, flush type switch, earthing and requiredaccessories |
| 174 | Point wiring for independent plug in 20 mm metal conduit with 1.5 sq.mm(2+1E) FRLSH grade copper wire, flush type switch, earthing and requiredaccessories |
| 175 | Repairing work for 20 HP Centrifugal Motor Pump set: |
| 176 | Supply of Following spares for above pumpset: |
| 177 | Motor Cooling Fan |
| 178 | Rotter Balancing |
| 179 | Best Quality grease AP 3 |
| 180 | Bearing Cap |
| 181 | Motor Top bearing |
| 182 | Motor Bottom bearing |
| 183 | Motor top and bottom Shaft Welding Turning |
| 184 | Oil Seal |
| 185 | Bearing check - nut |
| 186 | Motor housing Cover Top |
| 187 | Motor housing Cover Bottom |
| 188 | Motor connection plate |
| 189 | Motor connection lugs |
| 190 | Pump Shaft Sleeve S/S |
| 191 | Pump Shaft S/S (New) |
| 192 | Pump Shaft Balance |
| 193 | Pump Impeller |
| 194 | Impeller Neck Ring |
| 195 | Impeller Balance |
| 196 | Impeller diffuser |
| 197 | Oil seal & Mechanical Seal |
| 198 | Coupling Bush |
| 199 | Repairing work for 30 HP Centrifugal Motor Pump set: |
| 200 | Supply of Following spares for above pumpset: |
| 201 | Motor Cooling Fan |
| 202 | Rotter Balancing |
| 203 | Best Quality grease AP 3 |
| 204 | Bearing Cap |
| 205 | Motor Top bearing |
| 206 | Motor Bottom bearing |
| 207 | Motor top and bottom Shaft Welding Turning |
| 208 | Oil Seal |
| 209 | Bearing check - nut |
| 210 | Motor housing Cover Top |
| 211 | Motor housing Cover Bottom |
| 212 | Motor connection plate |
| 213 | Motor connection lugs |
| 214 | Pump Shaft Sleeve S/S |
| 215 | Pump Shaft S/S (New) |
| 216 | Pump Shaft Balance |
| 217 | Pump Impeller |
| 218 | Impeller Neck Ring |
| 219 | Impeller Balance |
| 220 | Impeller diffuser |
| 221 | Oil seal & Mechanical Seal |
| 222 | Coupling Bush |
| 223 | Repairing work for 40 HP Centrifugal Motor Pump set: |
| 224 | Supply of Following spares for above pumpset: |
| 225 | Motor Cooling Fan |
| 226 | Rotter Balancing |
| 227 | Best Quality grease AP 3 |
| 228 | Bearing Cap |
| 229 | Motor Top bearing |
| 230 | Motor Bottom bearing |
| 231 | Motor top and bottom Shaft Welding Turning |
| 232 | Oil Seal |
| 233 | Bearing check - nut |
| 234 | Motor housing Cover Top |
| 235 | Motor housing Cover Bottom |
| 236 | Motor connection plate |
| 237 | Motor connection lugs |
| 238 | Pump Shaft Sleeve S/S |
| 239 | Pump Shaft S/S (New) |
| 240 | Pump Shaft Balance |
| 241 | Pump Impeller |
| 242 | Impeller Neck Ring |
| 243 | Impeller Balance |
| 244 | Impeller diffuser |
| 245 | Oil seal & Mechanical Seal |
| 246 | Coupling Bush |
| 247 | Repairing of 60 HP V.T Pumpset |
| 248 | Removing and Dismaintling of 60 HP V.T pump set with allied equipments etc complete |
| 249 | Repairing of vertical Turbine pump with turning, grinding and polishing of bowl assembly and required spares with skilled labour charges etc. complete |
| 250 | Supply of Following spares for above pumpset |
| 251 | Stuffing box bushing bronze |
| 252 | Gland sleeve S.S. |
| 253 | Rubber Bush |
| 254 | Ratchet as per sample |
| 255 | Neck ring bronze |
| 256 | Bowl bush |
| 257 | Bowl turning and surface counter and top |
| 258 | Impeller |
| 259 | Impeller collect |
| 260 | Impeller turning |
| 261 | Impeller balancing |
| 262 | Top shaft S.S |
| 263 | Column pipe EN - 8 |
| 264 | Column shaft |
| 265 | Shaft sleeve |
| 266 | Special strengthen Heavy Duty nut bolts for total pump set |
| 267 | Rubber Packing |
| 268 | Pump Foundation plate surfacing and Finishing etc. complete |
| 269 | Column pipe repair with welding of ribs to MS Flange with machining etc |
| 270 | coupling Socket |
| 271 | Spyder |
| 272 | Spyder rubber |
| 273 | Pump Shaft |
| 274 | Complete servicing of 60 HP V.T motor with checking insulation winding, varnishing and rotor balancing etc complete . |
| 275 | Transportation of V.T Pumpset with loading and unloading by crane with too and from site etc complete |
| 276 | Erection and assembling of 60 HP V.T Pumpset with bowl assembly, discharge head, coloumn pipe, line shaft with allied equipments etc complete . |
| 277 | Repairing of 60 HP Motor: |
| 278 | Removing and Dismaintling of 60 HP VHS type Motor with allied equipments etc complete |
| 279 | Complete rewinding of motor with quality copper wire 'F' class insulation including heating, varnishing, backing and skilled labour charges etc complete with testing of site of work . |
| 280 | Supply of Following spares for above pumpset |
| 281 | Rotor balancing |
| 282 | Cooling fan |
| 283 | best quality grease Ap3 |
| 284 | 140 No. bearing oil |
| 285 | Motor top bearing |
| 286 | Motor bottom bearing |
| 287 | Motor bottom / top Shaft welding turning |
| 288 | Oil seal |
| 289 | Motor lock ratchet check lock key complete bushing S.S & etc. |
| 290 | Brass pipe & Nipple etc complete |
| 291 | Terminal |
| 292 | Brass Lugs |
| 293 | Motor housing cover top |
| 294 | Motor housing cover bottom |
| 295 | Bearing checknut |
| 296 | Cerclip |
| 297 | bearing Cap |
| 298 | Transportation of motor with loading and unloading by crane with too and fromsite etc complete |
| 299 | Erection and assembling of 60 HP VHS type motor with allied equipments etc complete . |
| 300 | Supplying & erecting DOL starter: |
| 301 | 7.5 H.P. |
| 302 | Supplying & erecting Star Delta Starter: |
| 303 | 20 H.P. |
| 304 | 15 H.P |
| 305 | Supplying & erecting HRC fuse cartridge 415V: |
| 306 | 60 Amp |
| 307 | 80 Amp |
| 308 | 100 Amp |
| 309 | 125 Amp |
| 310 | 150 Amp |
| 311 | 200 Amp |
| 312 | Supplying & replacing timer for STAR/DELTA motor starter: |
| 313 | GIC Stardelta Timer |
| 314 | GIC Timer SM-301 |
| 315 | Select 800SD |
| 316 | Time Switch Timer |
| 317 | Supplying and replacing thermal over load relay for motor starter: |
| 318 | Relay Range 4 to 6 Amp |
| 319 | Relay Range 9 to 14 Amp |
| 320 | Relay Range 13 to 21 Amp |
| 321 | Relay Range 45 to 75 Amp |
| 322 | Supplying & erecting four pole ON LOAD change over switch, 415V, open execution having staggered termination, phase barrier, shroud termination and terminal cover along with auxiliary contacts and ready to upgrade with fuse protection kit, rotary handle, operational current category AC23A complying to IS/IEC 60947-3 Part-1/3: |
| 323 | 25 AMP 415 Volt mark |
| 324 | 32 AMP 415 Volt ISI mark |
| 325 | 40 AMP 415 Volt ISI mark |
| 326 | 63 AMP 415 Volt ISI mark |
| 327 | 125 AMP 415 Volt ISI mark |
| 328 | 200 AMP 415 Volt ISI mark |
| 329 | Repairing of motor starter (Rate quoted per HP of pump) Please Enable Macros to View BoQ information |