Name of Work:- REPAIR/ REPLACEMENT OF DISTRIBUTION WATER LINE WITH CONNECTED VALVE ETC. AT MIL STN GANDHIANGAR | Sl. No. | Item Description | |
| 1 | Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth, for taking out water pipes, etc in Soft/loose soil all as specified and directed by Engr-in-Charge. | | 2 | Excavation in trenches (Earth work in excavation) by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-in-charge | | 3 | Returning, filling in, including spreading, leveling, watering and well ramming in layer not exc 25 cm with soil obtained from excavation all as specified and directed by Engr-in-Charge. | | 4 | Removing excavated material (Soil) not exc 50 mtr and depositing where directed by Engr-in-Charge at a level not exc. 1.5 m above the starting point. | | 5 | Taking up or down steel tubing and connections for 15mm bore of pipe complete all as specified and directed by Engr-in-Charge. | | 6 | Taking up or down steel tubing and connections for 20mm bore of pipe complete all as specified and directed by Engr-in-Charge. | | 7 | Taking up or down steel tubing and connections for 25mm bore of pipe complete all as specified and directed by Engr-in-Charge. | | 8 | Taking up or down steel tubing and connections for 40mm bore of pipe complete all as specified and directed by Engr-in-Charge. | | 9 | Taking up or down steel tubing and connections for 50mm bore of pipe complete all as specified and directed by Engr-in-Charge. | | 10 | Taking up or down steel tubing and connections for 80mm bore of pipe complete all as specified and directed by Engr-in-Charge. | | 11 | Taking up or down steel tubing and connections for 100 mm bore of pipe complete all as specified and directed by Engr-in-Charge. | | 12 | Taking up,150 mm bore, cast iron water mains (including all fittings) with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed by Engr-in-Charge. | | 13 | Taking up,100 mm bore, cast iron water mains (including all fittings) with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed by Engr-in-Charge. | | 14 | S&F in repair/replacement, galvanized, steel water tubes, medium grade with all fittings, laid in trenches complete all as specified and directed by Engr-in-Charge for 20mm bore of pipe. | | 15 | S&F in repair/replacement, galvanized, steel water tubes, medium grade with all fittings, laid in trenches complete all as specified and directed by Engr-in-Charge for 25mm bore of pipe. | | 16 | S&F in repair/replacement, galvanized, steel water tubes, medium grade with all fittings, laid in trenches complete all as specified and directed by Engr-in-Charge for 40mm bore of pipe. | | 17 | S&F in repair/replacement, galvanized, steel water tubes, medium grade with all fittings, laid in trenches complete all as specified and directed by Engr-in-Charge for 50mm bore of pipe. | | 18 | S&F in repair/replacement, galvanized, steel water tubes, medium grade with all fittings, laid in trenches complete all as specified and directed by Engr-in-Charge for 80mm bore of pipe. | | 19 | S&F in repair/replacement, galvanized, steel water tubes, medium grade with all fittings, laid in trenches complete all as specified and directed by Engr-in-Charge for100 mm bore of pipe. | | 20 | S&F in repair/replacement, galvanized, steel water tubes, for 15mm bore of pipe medium grade with all fittings, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed directed by Engr-in-Charge | | 21 | S&F in repair/replacement, galvanized, steel water tubes, for 20 mm bore of pipe medium grade with all fittings, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engr-in-Charge | | 22 | S&F in repair/replacement, galvanized, steel water tubes, for 25 mm bore of pipe medium grade with all fittings, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engr-in-Charge | | 23 | S&F in repair/replacement, galvanized, steel water tubes, for 40 mm bore of pipe medium grade with all fittings, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engr-in-Charge | | 24 | S&F in repair/replacement, galvanized, steel water tubes, for 50 mm bore of pipe medium grade with all fittings, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engr-in-Charge | | 25 | S&F in repair/replacement, galvanized, steel water tubes, for 80mm bore of pipe medium grade with all fittings, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engr-in-Charge | | 26 | S&F in repair/replacement, in repairs, Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed by Engr-in-Charge 15mm bore of pipe complete all as specified and directed. | | 27 | S&F in repair/replacement, in repairs, Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed by Engr-in-Charge 20mm bore of pipe complete all as specified and directed. | | 28 | S&F in repair/replacement, in repairs, Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed by Engr-in-Charge 25mm bore of pipe complete all as specified and directed. | | 29 | S&F in repair/replacement, in repairs, Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed by Engr-in-Charge 40mm bore of pipe complete all as specified and directed. | | 30 | S&F in repair/replacement, in repairs, Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed by Engr-in-Charge 50mm bore of pipe complete all as specified and directed. | | 31 | S&F in repair/replacement, in repairs, Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed by Engr-in-Charge 80mm bore of pipe complete all as specified and directed. | | 32 | Supply, laying, connecting, jointing and testing of DI pipe with spigot and socket ends, class K-7 conforming to IS: 8329/2000 suitable for (push-on) rubber gasket jointing with centrifugally applied inside cement mortar lining with sulpher resistant with a finishing layer of black bitumen coating on external surfaces in any length, laid in trenches for 150mm bore pipe complete all as specified and as directed. | | 33 | Supply, laying, connecting, jointing and testing of DI pipe with spigot and socket ends, class K-7 conforming to IS: 8329/2000 suitable for (push-on) rubber gasket jointing with centrifugally applied inside cement mortar lining with sulpher resistant with a finishing layer of black bitumen coating on external surfaces in any length, laid in trenches for 100mm bore pipe complete all as specified and as directed. | | 34 | M&L for horizontal drilling, in any type of soil, using trenchless technology suitable for insertion of 25 to 50 mm bore CI/GI pipe complete all as specified and directed by Engr-in-Charge. | | 35 | M&L for horizontal drilling, in any type of soil, using trenchless technology suitable for insertion of pipe upto 100 mm bore CI/DI pipe complete all as specified and directed by Engr-in-Charge. | | 36 | S&F in repair/replacement, in repair, DI fittings, bends, tapers any type (straight, bend, increasing, decreasing or double socket etc), Tee pieces single branch, 'Y' junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs of size for 100 to 200 mm bore complete all as specified and directed by Engr-in-Charge | | 37 | S&F, in repair, Ductile iron resilient seated gate valve 100 mm dia with flanged ends class PN-1.6, Hand wheel operated, Non rising stainless steel stem, EPDM seat, EPDM bonnet gasket, EPDM Housing bush O ring, and EPDM sealing Ring flanges drilled to IS:1538, Shell test pressure-2.4 MPa (Hyd), Seat test pressure-1.6 MPa, confirming to IS :14846 including all jointing materials such as nuts, bolts, washers and gaskets etc. complete all as specified & directed by Engr-in-charge. | | 38 | S&F, in repair, Ductile iron resilient seated gate valve 80 mm dia with flanged ends class PN-1.6, Hand wheel operated, Non rising stainless steel stem, EPDM seat, EPDM bonnet gasket, EPDM Housing bush O ring, and EPDM sealing Ring flanges drilled to IS:1538, Shell test pressure-2.4 MPa (Hyd), Seat test pressure-1.6 MPa, confirming to IS :14846 including all jointing materials such as nuts, bolts, washers and gaskets etc. complete all as specified & directed by Engr-in-charge. | | 39 | Demolition of existing valve pit and M&L for construction of valve pit consisisting of 230mm thick, old size brick masonry wall in cement mortar (1:6), PCC (1:4:8) type D2, using 40mm graded stone aggregete as in fondation, PCC (1:2:4) type B1, using 20mm graded stone aggregete in coping/bed, finished even and smooth, rendering 15mm thick in cement mortar (1:6) internally and 10mm thick in cement mortar (1:4) externally, finished even and smooth without using extra cement incuding three coats of white wash and earth work in any type of soil and including 2 mm thick MS sheet cover fixed on 40mmx40mmx6mm thick angle iron frame ambeded in PCC coping with locking arrangement and mild steel hold fast & handle and duly painted with two coats of synthetic enamel paint over one coat of primer etc. complete all as specified and directed by Engr-in-Charge for the following sizes:-(a) 1350mm x 1000mm x 1200mm | | 40 | Demolition of existing valve pit and M&L for construction of valve pit consisisting of 230mm thick, old size brick masonry wall in cement mortar (1:6), PCC (1:4:8) type D2, using 40mm graded stone aggregete as in fondation, PCC (1:2:4) type B1, using 20mm graded stone aggregete in coping/bed, finished even and smooth, rendering 15mm thick in cement mortar (1:6) internally and 10mm thick in cement mortar (1:4) externally, finished even and smooth without using extra cement incuding three coats of white wash and earth work in any type of soil and including 2 mm thick MS sheet cover fixed on 40mmx40mmx6mm thick angle iron frame ambeded in PCC coping with locking arrangement and mild steel hold fast & handle and duly painted with two coats of synthetic enamel paint over one coat of primer etc. complete all as specified and directed by Engr-in-Charge for the following sizes:-(b) 1535mm x 1500mm x 1200mm | | 41 | Demolition of existing valve pit and M&L for construction of valve pit consisisting of 230mm thick, old size brick masonry wall in cement mortar (1:6), PCC (1:4:8) type D2, using 40mm graded stone aggregete as in fondation, PCC (1:2:4) type B1, using 20mm graded stone aggregete in coping/bed, finished even and smooth, rendering 15mm thick in cement mortar (1:6) internally and 10mm thick in cement mortar (1:4) externally, finished even and smooth without using extra cement incuding three coats of white wash and earth work in any type of soil and including 2 mm thick MS sheet cover fixed on 40mmx40mmx6mm thick angle iron frame ambeded in PCC coping with locking arrangement and mild steel hold fast & handle and duly painted with two coats of synthetic enamel paint over one coat of primer etc. complete all as specified and directed by Engr-in-Charge for the following sizes:-(c) 1050mm x 750mm x 1000mm | | 42 | M&L cleaning of valve pit chamber with sluice valve, pipes etc including replacement of existing wornout/defective gland packing, nut, bolt & washer, etc with new one to make the sluice valve perfectly leak proof including making of flow direction of inlet & outlet pipe line with necessary colour coding with one coat of synthetic enamel paint after preparation of old steel surfaces complete all as required and directed by Engr-in-Charge for 150 mm to 350 mm dia size complete al as specified and directed. | | 43 | M&L cleaning of valve pit chamber with sluice valve, pipes etc including replacement of existing wornout/defective gland packing, nut, bolt & washer, etc with new one to make the sluice valve perfectly leak proof including making of flow direction of inlet & outlet pipe line with necessary colour coding with one coat of synthetic enamel paint after preparation of old steel surfaces complete all as required and directed by Engr-in-Charge for 80 mm to 100 mm dia size complete al as specified and directed. Please Enable Macros to View BoQ information | | 44 | M&L cleaning of valve pit chamber with sluice valve, pipes etc including replacement of existing wornout/defective gland packing, nut, bolt & washer, etc with new one to make the sluice valve perfectly leak proof including making of flow direction of inlet & outlet pipe line with necessary colour coding with one coat of synthetic enamel paint after preparation of old steel surfaces complete all as required and directed by Engr-in-Charge for 80 mm to 100 mm dia size complete al as specified and directed. Please Enable Macros to View BoQ information |
|