Indian Tenders

Tender Notice

TDR 54812849
Tendering Authority Irrigation And Public Health Department
Tender No NO. EE-JSD-EA-I-2026-19526-615
Tender ID 2026_HPIPH_132368_1
Tender Brief Tender For Restoration Of Rain Damges To Water Supply Scheme Shamnagar In Tehsil Dharamshala, Diatrict Kanga (H.P.). (Sub Head:- Construction Of Khad X-Ing No.1 At Over Charan Khad Near Tau Cholla And Dismentaling ,Relaying And Jointing Of Gi Pipe 12
City Dharamshala
State Himachal Pradesh
Document Fees INR 350 /-
EMD INR 6890.0 /-
Tender Value Refer document
Tender Type Tender
Bidding Type Open Tender
Competition Type Indian

Tender Details

Tender for Restoration Of Rain Damges To Water Supply Scheme Shamnagar In Tehsil Dharamshala, Diatrict Kanga (H.P.). (Sub Head:- Construction Of Khad X-Ing No.1 At Over Charan Khad Near Tau Cholla And Dismentaling ,Relaying And Jointing Of Gi Pipe 125Mm Dia.)

Key Dates

Publish Date 24-03-2026
Last Date of Bid Submission 31-03-2026
Tender Opening Date 31-03-2026

Contact Information

Company Name Irrigation And Public Health Department
Contact Person Executive Engineer
Address JSV Division Dharamshala

BOQ Items

Name of Work:- Restoration of Rain Damges to WSS Shamnagar in Tehsil Dharamshala, Diatrict Kanga (H.P.). (Sub Head:- Construction of Khad X-ing No.1 at over Charan Khad Near Tau Cholla and Dismentaling ,Relaying and jointing of GI Pipe 125mm dia.)
Sl. No. Item Description
1Excavation in foundations, trenches, etc., in all types of soil, including pick work, jumper work, chiselling of hard or soft rock where blasting is prohibited, and excavation in slushy, marshy (daldal), or saturated soil; including dewatering by pumping or bailing out water at all depths. The work also includes stacking the excavated soil within site limits, away from the edge of excavation; refilling the stacked soil in 15 cm (fifteen centimeters) thick layers into plinths or foundations, as required; consolidating each layer by ramming and watering; and disposing of all surplus excavated earth — complete in all respects, as per the direction and to the full satisfaction of the Engineer-in-Charge, within all leads and lifts.
2Providing and laying cement concrete 1:4:8(1:cement :4 sand:8 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in foundation and plinth i/c carriage of material complete in all respect within all leads and lifts as per direction and to the entire satisfaction of Engineer-in-Charge.
3Providing form work with steel plates 3.15 mm thick welded with angles iron in frame 30 x 30 x 5 mm so as to give a fair finish including centering shuttering struting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor two ceiling not exceeding 4 meters and removal of the same for in-situ- reinforced concrete and plain concrete in: Vertical surface such as wall (any thickness) partition and the like i/c attached pillasters, butresses plinth and string course complete in all respect including all leads and lifts as per direction and to the entire satisfaction of Engineer-in-Charge.
4Providing and laying cement concrete 1:3:6 (1cement:3 sand:6 graded stone aggregate 20mm nominal size) curring complete excluding cost of form work in foundation and plinth complete in all respect including all leads and Lifts as per the direction and to be entire satisfaction of Engineer-In-Charge.
5Providing and laying cement concrete work 1:2:4 (1 Cement:2 Sand:4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : In foundation and Plinth complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge within all leads and lifts.
6Providing and laying mild steel /tor steel reinforcement for RCC work i/c bending binding and placing in position complete including cost of binding wire up to all floor level complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge within all leads and lifts.
7WIRE ROPES & ACCESSORIES SUSPENSION BRIDGES Supplying, hoisting and streching to specified profile wire rope for suspension bridges. (including guy ropes) complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge within all leads and lifts.
8Providing and fixing in position steel accessories like clamps, suspenders, rope grips,U-Bolts ancherage bolts with pulleys etc.alongwith fixrures for suspension bridges complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge within all leads and lifts..
9Dismentalling of old laid Galvanized Mild Steel Tube fitting including testing of following dias from trenches tube fitting (earth work in trenches to be measured and paid to separately) complete in all respect as per the direction and to the entire of Engineer-in-Charge within all leads and lifts.
10125 mm dia (M. P/E)
1180 mm dia (M. P/E)
12Relaying, jointing, and testing of galvanized mild steel tube fittings of the following diameters in trenches (earthwork in trenches to be measured and paid for separately), complete in all respects, within all leads and lifts, as per the direction and to the entire satisfaction of the Engineer-in-Charge.
13125 mm dia (M. P/E)
1480 mm dia (M. P/E) Please Enable Macros to View BoQ information

Other Detail

Information Source https://hptenders.gov.in
Download FileName File Description File Size
Download 9b0d86a9-0259-4cd7-87b0-374e691981a9.html Tender Documents 0 KB
Download BOQ_195731.xls Tender Documents 0 KB
Download form68.pdf Tender Documents 0 KB
Download Tendernotice_1.pdf Tender Documents 0 KB
Download terms.pdf Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.