|
| 1 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required DSR 17.3 |
| 2 | W.C. pan with ISI marked white solid plastic seat and lid. DSR 17.3.1 |
| 3 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P.brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : DSR 17..7 |
| 4 | White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps DSR 17.7.3 |
| 5 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : DSR 17.10 |
| 6 | Kitchen sink without drain board |
| 7 | 610x460 mm bowl depth 200 mm DSR 17.10.2.2 |
| 8 | Providing &fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. DSR 17.28 |
| 9 | Flexible pipe DSR 17.28.232mm dia DSR 17.28.2.1 |
| 10 | 40mm dia DSR 17.28.2.2 |
| 11 | Providing and fixing soil, waste and vent pipes : DSR 17.35 |
| 12 | 75 mm dia DSR 17.35.2 |
| 13 | Centrifugal cast iron S&S pipe as per IS: 3989 DSR 17.35.2.2 |
| 14 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : |
| 15 | 100 mm inlet and 75 mm outlet |
| 16 | Sand Cast Iron S&S as per IS- 3989 DSR 17.60.2.1 |
| 17 | Providing &fixing G.I.pipes complete with G.I. fittings , clamps, i/c cutting and making good the walls etc. DSR 18.10 |
| 18 | 15 mm dia nominal bore DSR 18.10.1 |
| 19 | 20 mm dia nominal bore DSR 18.10.2 |
| 20 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : DSR 18.17 |
| 21 | Size 15mm i/d (NSR) |
| 22 | Size 20mm dia DSR 18.17.1A |
| 23 | Providing & fixing uplasticised PVC connection pipe with brass unions : DSR 18.21 |
| 24 | 30 cm length DSR 18.21.1 |
| 25 | 15 mm nominal bore DSR 18.21.1.1 |
| 26 | Providing & fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) DSR 18.46 |
| 27 | 15 mm nominal bore DSR 18.46.1 |
| 28 | 20 mm nominal bore DSR 18.46.2 |
| 29 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank DSR 18.48 |
| 30 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : DSR 18.49 |
| 31 | 15 mm nominal bore DSR 18.49.1 |
| 32 | Providing and fixing C.P. brass long body bib cock of approved quality. DSR 18.51 |
| 33 | 15 mm nominal bore DSR 18.51.1 |
| 34 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. DSR 18.52 |
| 35 | 15 mm nominal bore. DSR 18.52.1 |
| 36 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 DSR 18.53 |
| 37 | 15 mm nominal bore DSR 18.53.1 |
| 38 | Providing and fixing of Extension nippple upto 1-1/2\\" length DSR 18.53A |
| 39 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete DSR 18.62 |
| 40 | 20 mm nominal bore, DSR 18.62.2 |
| 41 | Cutting holes up to 30x30 cm in walls including making good the same: DSR 18.76 |
| 42 | With common burnt clay F.P.S. (non modular) bricks DSR 18.76.1 |
| 43 | Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. DSR 18.78 |
| 44 | Construction of Curb consisting of cement concrete 1:2:4 including cost of C.P. hinged grating and cost of sand bajri etc. |
| 45 | Providing & Fixing of Drip Seal joints to sand cast iron/ centrifugally cast (spun) iron pipes and fittings of diameter: |
| 46 | 75 mm |
| 47 | Prov. & fixing 550x 400 mm beveled edge mirror of superiorglass (of approved quality) complete with 5 mm thick hard board ground fixed to wooden cleats with C.P. brass of approved make |
| 48 | Providing and fixing of C.P. cup heavy duty of approved make |
| 49 | Providing and fixing GI Tank Nipple 15 mm dia complete |
| 50 | Providing and fixing of C.P. Steel Grating Heavy (With hole without hole) size 4\\" i/d of approved make |
| 51 | Providing and fixing of CP Brass/SS/ABS overhead shower with swiveling Joint , 125mm dia (min) with C.P Brass/ S.S Shower Arm and flange to the satsifaction of EIC of approved make ESSCO Model No. 536A & 542A or equialent Model of CERA /Kerovit/ Jal |
| 52 | Providing and fixing of CP Brass/SS Towel Rail 600mm of with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36520 Warna or equialent Model of CERA /Kerovit/ ESSCO |
| 53 | Providing and fixing of CP Brass/SS/ABS Soap Tray made of Plastic including glass bowl of approved make Jal Model No. 36540 or equialent Model of CERA /Kerovit/ ESSCO |
| 54 | Providing and fixing of CP Brass/SS Towel Ring with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36524 Warna or equialent Model of CERA /Kerovit/ ESSCO |
| 55 | Dismantling of Old material, not reuseable, including GI / HCI Pipe & Specials, Faucets, Ceramic Fixtures, PVC tanks & allied items and disposal of malba including that of chase from site to a approved dumping site complete. Please Enable Macros to View BoQ information |