|
Tender for Repairing Of 25Hp Submersible Motor Pump,50 Hp Centrifugal Pump And Lt Control Panel Of Pumping Plant, Sluice Valve And ,Cleaning Of Wtp And Esr And Filter Bed Etc. All Complete Job. Of Baddiha Rural Pipe Water Supply Scheme Under Drinking Water And Sanitation Division-02, Giridih For The Year 2025-26. , Providing And Supplying Isi Standard D.I. Special & Fitting With Sealing Rubber Gasket Of S.B.R. Complete With Cast Iron Follower Gland And M.S. Nut Bolts Coated Or Other Wise Protected From Rusting And Suitable For D.I. Pipes Including Ed,Cst All Taxes, Etc. Complete As Per Is-9523 But Excluding Freight. , Earth Work In Excavation (As Per I.S. 3114/1965 For Laying Of Different Types And Sizes Of Pipes So As To Give One Meter Average Cover Over The Socket Of Pipe With Disposal Of Excavated Earth Within Initial Lead And Lift As Per Specification And Direction Of Engineer-In -Charge , Supplying Labours, Tools Tackles Lubricant Etc. For Laying And Jointing Di / C.I.S/S Tyton Pipes (Class La) Trenches Supplying Rubber Gasket (Rubber Gasket Confirming To I.S.S - 5382 - 1969) And Making Gasket Joints Including Providing Night Guard Barrier And Red Light To Safe Guard Against Accident All Complete (Pipe To Be Supplied Departmentally Free Of Cost And Laying Of Pipes Is To Be Done As Per I.S.S. 3114-1985) As Per Design Specification And Direction Of E/I. (1) 100Mm , (2) 150Mm , Dismantaling Plain Cement Or Lime Concrete Work Including Stacking Serviceable Materials In Countable Stacks Within 15 Meter Lead And Disposal Of Unservisible Materials With All Leads Complete As Per Direction Of E/I , Providing Plain Cement Concrete M-150 In Nominal Mix Of (1:2:4) In Foundation With Approved Quality Of Store Chips 20 Mm-6 Mm Size Graded And Clean Coarsed Sand Of Fm 2.5 To 3.0 Including Screeing Shuttering Mixing Cement Concrete In Mixer And Placing In Position Vibrating Striking Curing Taxes And Royalty Alll Complete As Per Building Specification And Directio Of E/I , Labour Charge For One Cutting Of Cast Iron / Di Pipe And Specials Including Supplying Necessary Tools And Plants, Chipping Of Filling The Surface Finish As Per Specification And Direction Of E/I (1) 100Mm , (2) 150Mm , (6) 350Mm , Providing Double Flange Sluice Valve Confirming For Is-2906/ 14846 Include-Ing Worn Gear Arrangements As Per Test Pressure Stainless Steel Spindle, Caps Including All Taxes Transportation Etc. Complete. Without Bypass. (1) 100Mm , (2) 150Mm , (3) 200Mm , (4) 250Mm , (6) 350Mm , Supplying Labour And Tools For Fixing C.I. Sluice Valve In Trenches With A Pair C.I. Tail Piece Including Making Lead Caulked Joints And Flanged Joint As Per I.S.S. Specification Including Supplying Jointing Materials (Pig Lead Confirming To I.S.S. 782 - 1978 Yarn Confirming To I.S.S. 6587- 1972 And Nuts And Bolts Confirming To I.S.S 1364 - 1983) Including Drilling Holes In Flanges If Required As Per Specification And Direction Of E/I (1) 100Mm , (2) 150Mm , (3) 200Mm , (4) 250Mm , (6) 350Mm , Earth Work In Back Filling The Trenches After Laying Different Types And Size Of Pipes With Earth Removed During Excavation Within Initial Lead And Lift As Per Specification And Direction Of Engineer-In Charge (For Classification For Soil Item -A & B) , Supplying All Materials, Labours, Tools And Equipment And Constructing Brick Masonry Chamber Of 1.20M.X 0.90M. X 1.50M. Inner Size Having 25Cm. Thick 75A Brick Masonry Wall In C.M. (1:6), Over 150Mm. Plain Cement Concrete M- 150, Laid Over One Brick Flat Soling On 100Mm. Local Sand Filling, Including 12Mm. Thick Cement Plaster With Punning Of Inner Surface And Exposed Surface Of Boundary Wall In C.M. (1:6) And Reinforced Cement Concrete M- 150 Cover Slab 150Mm. Thick With 20Mm. To 6Mm. Graded Stone Chips, And Clean Coarse Sand Of F.M. 2.5 To 3 Including Providing Ci Surface Box And Screening Shuttering, Mixing, Placing, Striking, Curing, Taxes And Royalty All Complete As Per Approved Design, Drawing & Specification And Direction Of E/I. , Supply Of Chemical As Per Analyasis Attached , Civil / Building Work On @ 0.5% As Per Table No. 3.9 , Providing Labour For Cleaning Of Filter Media And Relaying , Raw Water Pumping Plant Cost For Disconnecting The Electric Line,Pipe Line, Dismounting And Taking Out Of 25Hp Motor And Lifting Of 25 Hp Submersible P/Set Along With All Column Pipe From Intake Well And Lowering The Same After Repairing With All Labours, Tools, Tackles And Technician Charges Including Transportation Charges From Intake Pumping Plant To Workshop And Vice , Cost Towards Rewinding Of 25 Hp Submersible Motor Operated On 415 V, 3 Phase, 50 Hz, 2900 Rpm With Supply/Fixing Of Pvc Insulated Copper Wire And Other Required Insulating Materials, Changing Of Top And Bottom Bushes, Sleeves,Stack Rod-4 Nos. Etc With Repairing Of Stator And Rotor By Changing Of Copper Strips, Straightening Of Shaft, Machining Works At Lathe Etc All Complete Including Changing Of Ss/Carbon Thrust Bearing Bush,Thrust Key, Lock Ring/Circlip,Stud Ring As Per Sample,Making And Fitting Of Motor Pump Coupling And Key-01 Set Etc Assembly The Same And Testing On Full Load. , Cost Towards Repairing And Overhauling Of 25 Hp Submersible Pump By Changing Of Its Damaged Parts Such As Pump Shaft, Impeller, Top And Bottom Bushes,Sleeve, Diffuser, Stud, Nut Bolt, Lathe Machine Work Assembly The Same, Testing On Full Load Etc All Complete. , Clear Water Pumping Plant Cost For Disconnecting The Electric Line, Pipe Line, Dismounting And Taking Out Of Old 50 Hp Centrifugal Pumpset With All Accessories Along With All Labour Tools And Tackles Etc All Complete. , Cost Towards Repairing And Overhauling Of 50 Hp Centrifugal Pump (Wilo Make) With Complete Repairing Of Impeller-1No., Pump Shaft- 1No.And Changing Of Its Damage Parts Such As Ss Bush-02 Nos. Ss Checknut- 02 Nos. As Per Sample, Metal Depositing And Machining Of C.I. Bearing Housing As Per Size With End Cap- 02 Nos. Key- 01 No. Gland Tightner- 02 Set, Paper Packing , Nuts Bolts, Gland Packing, Grease Etc. And Testing On Load Including Assembly And Fitting The Same On Base Plate Etc All Complete. , Cost Towards Repairing Of 50 Hp Motor Control Panel With Supply And Fitting Of S Contactor As Per Sample- 2 No. Over Load Relay-1 No. Timer Etc All Complete With All Labour, Tools, Tackles And Technician Charges ,[Make-L&T] For Water Treatment Plant. , Cost Towards Disconnecting All Electric Line And Joints And Dismantle The 100 Kva Servo Controlled Voltage Stabilizer For Checking Defects And Rectifying The Same With All Labour Tools And Tackles Etc. At Site Supplying And Fitting Of Operating Motor As Per Sample-1 No. Supplying And Fitting Of Voltmeter(0-500V)-3 Nos. Supplying And Fitting Of Ammeter (0-500A)-1 No. Supplying And Fitting Of Big Neon Light-3Nos. Supplying And Fitting Of Control Card-3Nos. Supplying And Fitting Of Variac Autotransformer 350 Amp-2Nos. Supplying And Fitting Of Control Transformer-3Nos. Supply And Filling Of New Transformer Oil Up To Desired Level-50 Litres (App.) , Supplying And Fitting Of 100 Mm Dia Cidf Sluice Valve With Nut Bolts Washer Insertion Rubber With All Labour Tool, Tackles And Technicians Charges Etc. All Complete Job. , Supplying And Fitting Of 200 Mm Dia Cidf Sluice Valve With Nut Bolts Washer Insertion Rubber With All Labour Tool, Tackles And Technicians Charges Etc. All Complete Job. , Supplying And Fitting Of 250 Mm Dia Cidf Sluice Valve With Nut Bolts Washer Insertion Rubber With All Labour Tool, Tackles And Technicians Charges Etc. All Complete Job. , Supplying And Fitting Of 100 Mm Dia Cidf Nr Valve With Nut Bolts Washer Insertion Rubber With All Labour Tool, Tackles And Technicians Charges Etc. All Complete Job. , Supplying And Fitting Of 150 Mm Flange Type Cidf Foot Valve Having Single Leather Flap And Gun Metal Seating Valve Shall Be Fixed On Suction Side Of Pump As Per Requirement Including Jointing Material And Hardware Including Labour Technician Tools Etc.All Complete. , 18% Gst , Labour Cess
|