|
| 1 | Excavation in trenches not exc 1.5m wide and n exc 1.5m in depth, for foundation, etc or for shaft , wells, cesspits, manholes, pier holes, etc n. exc 10 Sqm on plan and not exc 1.5m in depth and getting out in soft/ loose soil complete all as specified and directed. |
| 2 | M&L for PCC 1:4:8, type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed. |
| 3 | M & L for precast cement concrete block masonary type C1 1:3:6 (20 mm Graded aggregate )with solid blocks exc 10 built in CM 1:6 including raising height of man holes from ground level complete all as directed |
| 4 | M & L for 40mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) Damp proof course to horizontal or vertical surfaces including necessary formwork and finishing the surface even and smooth complete all as specified and directed |
| 5 | Removing excavated material to a distance n exc 50 m and deposited where directed at a level n exc 1.5 m above the starting point complete all as specified and as directed. |
| 6 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft / loose soil complete all as specified and as directed. |
| 7 | Providing precast cement concrete in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts,boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings,complete as specified and directed. |
| 8 | All as per srl item No 7 here-in-before but for chajjas complete all as specified and directed. |
| 9 | M&L Mild steel TMT bar 10 mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as directed and specified. |
| 10 | All as per srl item No 9 here-in-before but TMT bar of 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders complete all as directed and specified. |
| 11 | Demolition of Reinforced cement concrete in suspended slabs, beams, lintels etc. in cement mortar or cement concrete etc complete all as directed and specified. |
| 12 | M&L for hard core (with broken stone/boulders) of gauge not exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick watered rolled and rammed to a true surfaces complete all as specified. |
| 13 | M & L for PCC 1:4:8 type D-2 (40 mm graded stoneaggregate) 100mm thick & finishing the cement concrete surface without using extra cement finish even & fair all as directed. |
| 14 | M&L for 25mm thick cement concrete 1:2:4 type B-0 (using 12.50 mm graded stone aggregate) as in flooring and all other similar works finished even and smooth without using extra cement complete all as specified and directed. |
| 15 | M&L Vitrified Ceramic tiles full body 8mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set over 15mm thick screed in CM 1:6 jointed in neat cement slurry and pointed in white or coloured cement to match ,light shade. |
| 16 | M&L Vitrified Ceramic tiles full body 10mm thick light shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm,on vertical surfaces such as skirting, dados and risers to steps ,wall etc set over 10 mm thick cement plaster in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match colour of the tile. |
| 17 | M&L for joint free coloured non skid ceramic tiles, 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 18 | M&L for glazed ceramic tiles, coloured, 350mmX250mmX7mm /450mmX350mmX7mm thick on vertical surfaces such as skirtings, dados and risers to steps etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick rendering in CM 1:4 on stone masonry surfaces. |
| 19 | M & L for rendering 15 mm thick in CM 1:6 on stone masonary surface or surface other than fair faces of brick work or one side of lathing finished even and smooth without using extra cement complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 20 | M & L for rendering 15 mm thick in CM 1:6 on stone masonary surface or surface other than fair faces of brick work or one side of lathing finished even and smooth without using extra cement complete all as specified and as directed. Please Enable Macros to View BoQ information |