|
| 1 | Labour charges for removing grass thorney shurbs, Jungli shurb Kubabul and alike grass along roadside making the ground clean by showel and phavaras etc. complete. Spec. No.: As directed by Engineer in charge. |
| 2 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means Spec. No.: Bd. A.1 Page No. 259 |
| 3 | Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) Spec No.Bd.A.2 Page One Number 259, By Mechanical Means |
| 4 | Excavation for foundation in Soft rock and old cement and lime masonry foundations including removing the excavated mate-rials upto a distance of 50 metres beyond the building area and stacking as directed including dewatering preparing the bed for the foundation and necessary back filling with available earth murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) By Mechanical Means Spec. No.: Bd.A.4 Page No. 259 |
| 5 | Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader / Paver on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- By Mix in Place Method andGrading - I Material |
| 6 | Providing soling using 80mm size trap metal in 15cm. Layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. |
| 7 | Filling in plinth and floors with approved excavated materials in 15 cm to 20 cm layers including watering and compaction complete.Spec. No.: Bd.A.10 Page No. 262 |
| 8 | Filling in plinth and floors with contractor’s soil, sand or murum in 15 cm to 20cm, layers including watering and compaction complete.Spec. No. Bd.A.11 Page No. 263 |
| 9 | Disposel of Excavated material lead of 1.50 km including carting away upto municipal dumpimg ground loading, unloading, spreading etc. complete as directed by Engineer in charge. |
| 10 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Spec. No: - Bd. E.1 Page No.287 |
| 11 | Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade), Spec. No.: Bd.F12 Page No. 304 and B.7 Page No 38 |
| 12 | Providing and laying in situ cement concrete M -30 with tremix treatment for 200 mm thickness for Concrete Road is including laying plastic sheet for 125 micron thickness with groove cutting of 4 mm wide and 20 mm deep with necessary refilling with bitumen ( excluding reinforcement) with coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand) etc. complete with reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. Spec. No.: As directed by Engineer in charge. |
| 13 | Providing and fixing in position TMT-FE-500 reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Spec. No: - Bd.F.17 Page No. 306 |
| 14 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water, striking joints on unexposed faces, raking out joints on exposed faces and watering Complete. Spec. No.: Bd.G. 1 Page No. 313 |
| 15 | Providing second class Burnt Brick masonary with conventional/ I.S. type bricks in cement mortor 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding complete. |
| 16 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15mm thick in C.M. 1:4 using waterproofing compound at 1 kg. per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8mm thick in C.M. 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. With natural sand. Spec. No.Bd.L.7 Page No. 369. |
| 17 | Providing and fixing heavy duty inter locking concrete RUBBER MOULD GLOSSY PAVING BLOCKS of 60 millimeter thickness of having a strength of 400 Kilogram/sq.m of approved quality and shape on a bed of crushed sand of 25 to 30 millimeter thick including striking joints and cleaning etc. complete. (using 100% crushed sand) Spec. No. Bd. M-12 page One Number 385 |
| 18 | Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete. NOTE: For Item One Number 15 to 18 prior approval of Superintending Engineer will be necessary Spec. No: - As directed by Engineer in charge |
| 19 | Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete.**(Basic Rate of Granite Rs.2656.00/Sq.m.) Spec. No: - Bd. M . 3B Page No. 380 |
| 20 | Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba white/ Cat barry brown/ RBI red/ Ocean brown granite stone for treads and rises of steps and staircase/ Cladding of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1 : 4 cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete (Basic rate of granite=Rs.2656.00/ Sq.m) Spec. No: - Bd. M . 22 B/ Page No. 390 |
| 21 | Providing and Laying hot applied thermoplastic road marking strip on Bituminous Surface of specified shade/ colour of 2.5 mm thick including 1.5 Refractive index reflectorizing glass beads @ 250gm/sqm .Thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC 35:2015. Initial Dry reflectivity RL shall be > 250 mcd/sqm/lux measured in the initial 7 days and sustained reflectivity RL of 100 mcd/sqm/ lux and Qd of 100 mcd/sqm/ lux measured at the end of 2 years by means of a Standard ReflectoMetre of Zehntner, Easylux, Delta make capable of measuring RL & QD both according to IRC 35:2015 clause 15.5.The finished surface to be level, uniform, and free from streaks and holes complete as per direction of Engineer-in-charge and in accordance with applicable specifications.(Refer MORTH Clause803 for technical Specification and Performance for IRC 35:2015). |
| 22 | Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140Kilogramwith frame as per approved make etc complete Spec.no.Bd.V.43, Page One Number 574 |
| 23 | Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140Kilogramwith frame etc complete. Spec.no.Bd.V.43, Page One Number 574 |
| 24 | Providing and laying concrete pipes of I.S.NP. class of 225mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. Spec.No.Bd.V.41, Page One Number 573 |
| 25 | BRICKS:-Water absorption (set of 5 bricks), Compressive strength (set of 5 bricks), Efflorescence (set of 5 bricks) |
| 26 | CONCRETE:-Compressive Strength OF C.C. Cube(Set of 3 cubes) |
| 27 | STEEL BAR TESTING :-Up to 16 mm (set of 3 bars) |
| 28 | CONCRETE PAVING BLOCKSCompressive Strength , Water Absorption,(Set of 8 Blocks) Please Enable Macros to View BoQ information |