|
| 1 | B/R PORTIONDemolition of unreinforced cement concrete in roofs, floors (other than groundfloors) chajjas and similar suspended work including removing of unserviceable materials n exc 100m complete all as specified and directed |
| 2 | M&L for 25mm thick (average thickness) PCC (1:2:4), type B-0 (using 12.5 mm graded stone aggregate) with WPC as in roof padding, chajja repairs etc complete all as specified and as directed by Engineer-in-Charge.Note: WPC will be measured and paid separately |
| 3 | M&L for Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1.4) with water proof compound for external brick surface finished even & smooth without using extra cement etc complete all as specified and directed by Engr-in-charge.Note:- WPC will be measured and paid separately. |
| 4 | M&L for APP based polymeric membrane minimum weighing 3kg/Sqm and 3mm thick reinforced with polyester non woven fabric (weight not less than 150 gm/sqm) over a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces, by troch application with overlap 100mm on the traverse direction and 75mm on longitudinal direction on exisisting RCC roof surface and applying one coat of aluminium paint over top surfaces of membrane @ 0.11 litre /sqm on top surface etc complete all as specified and as directed by Engineer-in-Charge. |
| 5 | Taking down chowkat or frame with shutter (without taking off shutter from the frame) n.exc. 1.5 sqm each, making good disturbed surfaces and removing materials from site of work etc complete all as directed by the Engr-in-charge. |
| 6 | Taking down chowkat or frame with shutter (without taking off shutter from the frame) exc. 1.5 sqm each but n exc 4 Sqm, making good disturbed surfaces and removing materials from site of work etc complete all as directed by the Engr-in-charge. |
| 7 | M&L for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, etc all complete as per requirement and direction of Engineer-in- charge. |
| 8 | M&L for Powder coated (Minimum thickness of powder coating 50micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engr-in-charge.. |
| 9 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws etc all complete as per architectural drawings and the directions of Engineer-in-charge etc complete all as specified and directed. |
| 10 | S&F 5.50mm thick sheet glass of ordinary quality and glazing with rubber in squares exc 0.50 sqm in each pane etc complete all as specified and as directed by Engr-in-charge. |
| 11 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire stapel etc complete all as secified and as directed |
| 12 | Dismantling Stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed by Engr-in-charge. |
| 13 | M&L for joint free Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed. |
| 14 | M&L for joint free Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed. |
| 15 | M&L for Machine cut kota stone slab for flooring 18-20mm thick mirror polishing to give high gloss finish over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specifed and as directed. |
| 16 | M&L for Makrana white marble 18-20mm thick machine cut, bedded jointed and pointed with gray cement slurry including cutting size as specified on ground and polishiing etc complete all as specifed and as directed. |
| 17 | M&L for glossy finish chequered cement concrete tiles of size 300 x 300 x 25mm thick with mixture of white and gray cement in equal proportion and no pigment set, jointed and pointed in neat cement slurry in floors etc complete all as specified and as directed. |
| 18 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and as directed by Engr-in-charge |
| 19 | M&L for glazed ceramic tiles of size 450 x 300 x 7mm thick coloured tiles on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface etc complete all as specified and as directed. |
| 20 | M&L for mirror polished Machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and bull nosing etc complete all as specified and directed. |
| 21 | M&L for mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish etc complete all as specified and as directed |
| 22 | M&L for Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc complete all as specified and directed. |
| 23 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) etc complete all as specified and as directed, |
| 24 | M&L for 75 mm thick PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in plinth protection, Hard standing finished even and fair etc complete all as specified and directed by Engineer-in-Charge. |
| 25 | M&L for 25 mm thick plain cement concrete(1:2:4), type B-0 , (using 12.5 mm graded aggregate ) as in leveling course etc complete all as specified and directed by Engineer-in-Charge. |
| 26 | M&L for screed bed or bedding layers of 20 mm thick in cement mortar (1:6) for laying floor finishes etc complete all as specified and directed. |
| 27 | M&L for rendering 10mm thick in cement mortar (1:3) to receive tiles in vertical surface etc complete all as specified and directed. |
| 28 | Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each and refixing in same opening with all accessories (Such as Hinges any size, screws etc) etc complete all as specified and as directed by Engineer-in-Charge. |
| 29 | Dismantling wall and ceilling boards(fibre, pilp, insulation etc) or insulation boards/slab/blankets, any thickness including cover filletes etc complete all as specified and as directed by Engr-in-charge. |
| 30 | S&F Anodised aluminium powder coated snap grid 605 x 605mm frame work for false ceiling with 12mm thick GI wire work etc complete all as specified and directed by Engr -in-charge. |
| 31 | S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long etc complete all as specified and directed by Engr -in-charge. |
| 32 | S&F 6mm thick Non asbestos fibre cement building design board fixed or laid /inserted to timber /GI/ aluminium frame work with screws etc complete all as specified and directed by Engr -in-charge. |
| 33 | S&F 12 mm dia Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long etc complete all as specified and directed by Engr -in-charge. |
| 34 | Dismantling Plain or corrugated steel sheeting of any gauge & any thickness, including Nainital or similar pattern of roof coverings including ridge etc complete all as specified and as directed. |
| 35 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified etc complete all as specified and as directed. |
| 36 | M&L for preparation of old steel surfaces of any description, over 10cm in width or girth,not otherwise described and apply two coats of synthetic enamel paints over a coat of red oxide zinc chrome primer etc complete all as specified and as directed. |
| 37 | S&F 1.25mm thick Mild steel sheet eaves gutters, 150mm dia, galvanised class 3, half round with rounded edges etc complete all as specified and as directed. |
| 38 | Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed by the Engr-in-charge. |
| 39 | M&L for Rendering 20 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1.4) with water proof compound for external brick surface finished even & smooth (without using extra cement) etc complete all as specified and as directed by the Engr-in-charge.Note:- WPC will be mesured and paid separately. |
| 40 | Supply only Integral water proofing compound etc complete all as specified. |
| 41 | M&L for Rendering 15 mm thick other than fair faces of brick work or concrete surfaces in cement mortar (1.6) for internal brick with even & fair surface all as specified and directed by the Engr-in-charge. |
| 42 | M&L for preparation of newly plastered surface of wall (internal) and appying two coats of white or tinted oil bound distemper over one coat of alkali resistant primer over 3 mm thick wall care putty etc complete all as specified and as directed by the Engr-in-charge. |
| 43 | M&L for prepartion of new plaster surface of wall (External) and apply two coats of acrylic exterior water proof emulsion paint over a coat of primer etc complete all as specified and directed by the Engr-in-charge. |
| 44 | M&L for complete removal of existing treatment of existing surface of wall (External) and applying two coat of acrylic exterior water proof emulsion paint etc complete all as specified and directed by the Engr-in-charge. |
| 45 | Demolition of brick work or stone/builder masonery, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete etc complete all as specified and directed by Engr-in-Charge. |
| 46 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition ) in above ground floor and pavings not exceeding 15 cm thick, including removal etc complete all as specified and directed. |
| 47 | Excavation in trenches as in soft/loose soil, not exc 1.5 m wide and not exc 1.5m in depth and getting out etc complete all as specified and as directed. |
| 48 | Removing excavated material n. exc. 50m and depositing where directed at a level n exc. 1.5km above the starting point etc complete all as specified and as directed. |
| 49 | Returning, filling in, including spreading, levelling, watering and well ramming in layers n exc. 25 cm thick in soft/loose soil etc complete all as specified and as directed. |
| 50 | M&L for Cutting holes of stone wall exc. half brick thickness but not exc one brick thick build in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) Type B-1 as required, etc complete all as specified and as directed. |
| 51 | Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed. |
| 52 | M&L for Cutting out bricks, forming toothing for, and bonding new into old work including value of new materials entering old walls and jointing and pointing (measured on vertical face in contact with old wall only) in cement mortar (1:4) and including 15 mm thick plastering in cement mortaar (1:4) and pointing etc complete all specified and directed by Engr-In-Charge. |
| 53 | M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:4) etc complete all as specified and directed. |
| 54 | M&L for hardcore of broken bricks n exc. 63 mm, deposited, spread & levelled in layers n.exc. 15 cm thick, watered & rammed to a true surface etc complete all as specified & as directed. |
| 55 | M&L for sand filling under floors in layer n exc 25 cm thick or in foundations including watering and consolidation etc complete all as specified & as directed. |
| 56 | M&L for PCC (1:4:8), type D2, using 40mm graded aggregates, in foundation filling and mass concrete as in lean concrete etc complete all as specified & as directed. |
| 57 | M&L for brick work with fly ash old size bricks straight or curved on plan exc 6m mean radius built in cement mortar (1:6) etc complete all as specified and directed. |
| 58 | M&L for brick work with fly ash modular bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar (1:4) etc complete all as specified and directed. |
| 59 | M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) with water proofing compound for external brick surface finished even and fair etc complete all as specified and directed..Note:- WPC will be measured and paid separately. |
| 60 | M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) for internal brick surface finished even & smooth (without using extra cement) etc complete all as specified and directed. |
| 61 | M&L for Rendering 5mm thick in cement mortar (1:3) on ceiling surfaces finished even and smooth without using extra cement etc complete all as specified and directed. |
| 62 | M&L for PCC(1:3:6), type C-2, (using 40mm graded stone aggregate) 75mm thick as in sub base floor etc complete all as specified and directed. |
| 63 | M&L for PCC(1:4:8), type D-2, (using 40mm graded stone aggregate) 100mm thick as in floor and finishing cement concrete surface even and smooth without using extra cement etc complete all as specified and directed. |
| 64 | M&L for use and waste of Formwork to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, rough finished surface of concrete etc complete all as specified and directed. |
| 65 | M&L for use and waste of Formwork to chullah hoods, chajjas, troughs and similar items including edges, rough finished surface of conrete etc complete all as per specified and directed. |
| 66 | M&L for RCC M-25 (Design mix) (using 20 mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and directed. |
| 67 | M&L for RCC M-25 (Design mix) (using 20 mm graded stone aggregate) as in chajja etc complete all as specified and directed. |
| 68 | M&L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for colums,hooking ends, and including mild steel wire not less than 0.9mm dia or securing with clips quality conforming to, TMT bars etc complete all as specified and directed. |
| 69 | All as per item No- 68 above but 5 mm dia and over upto and including 10mm dia in stirrups, spacers and binders |
| 70 | S&F rolled sections as in main and cross beams, hip and jack rafters; purlins, Gusset plate and base plates, where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, Fe-410-Wgde -E-250) quality 'B' includng welding or riveting etc complete all as specified and as directed |
| 71 | M&L for Mild steel frame work as in flat iron for fix the steel framework for eaves board wind tie etc complete all as specified and directed. |
| 72 | M&L for rolled mild steel works in Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment etc complete all as specified and as directed. |
| 73 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc. 22.5cm and n exc 30cm long and dia of neck from 11 mm to 15 mm etc complete all as specified and as directed. |
| 74 | S&F pre-painted coloured trapezoidal profiled Galvalume/Zincalume sheet with min 0.50 mm TCT (total coated thickness), 550 Mpa minimum, yield strength confirming to IS-513 and shall be fixed using hot dip galvanized, self drilling and self tapping screws neoprene and EPDM washers as in roof covering. Penetrations and laps in sheet shall be sealed by using proper sealant profile etc complete all as specified and directed.Fixing system shall be as per manufacturers instructions and shall be safe against effects of Wind velocity. |
| 75 | S&F pre-painted coloured plain profiled Galvalume/Zincalume sheet with min 0.50 mm TCT (total coated thickness), 550 Mpa minimum, yield strength confirming to IS-513 and shall be fixed using hot dip galvanized, self drilling and self tapping screws neoprene and EPDM washers as in ridge covering. Penetrations and laps in sheet shall be sealed by using proper sealant profile etc complete all as specified and directed.Fixing system shall be as per manufacturers instructions and shall be safe against effects of Wind velocity. |
| 76 | S&F Aluminium anodised tower bolt 100 mm long of extruded section etc complete all as specified and as directed. |
| 77 | S&F 100 mm stainless steel butt hinges, medium weight, cold rolled, complete all as specified. |
| 78 | S&F Aluminium handles, 150 mm size, cast type anodized complete all as specified and directed. |
| 79 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary SS screws shall be paid separately). |
| 80 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and crewed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately)Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made |
| 81 | S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, etc complete with glazing bars, devetailed or welded. |
| 82 | All as per item No- 81 above but without glazing bars ( for mosquito proof shutter ) |
| 83 | S&F 3 mm thick plain glass of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in squares n exc 0.50 sqm in each pane etc complete all as specified and as directed. |
| 84 | S&F Steel windows or ventilators, fixed type, with glazing bars ect complete all specified and directed. |
| 85 | S&F 3mm thick one side frosted glass of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in squares n exc 0.50 sqm in each pane etc complete all as specified and as directed. |
| 86 | S&F Harrison rails, mild steel, chromium plated including , stops, rollers etc complete all as specified and as directed by Engr-in-charge. |
| 87 | S&F Brass chromium plated brackets with fixing brackets for curtain rod etc complete all as specified and as directed by Engr-in-charge. |
| 88 | M&L for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 etc complete all as specified and as directed |
| 89 | M&L for PCC (1:3:6), type C1, using 20mm graded crushed stone aggregate as in hold fast including necessary form work fair finished of exposed surfaces of concrete and making good with existing surfaces etc complete all as specified and as directed. |
| 90 | M&L for applying three coats of white wash on walls including preparation of new plastered surfaces etc complete all as specified and as directed. |
| 91 | M&L for applying three coat of white washing (Lime wash white) on ceiling surface including prepration of new plastered surface etc complete all as specified and directed. |
| 92 | M&L for preparation of untreated new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint ( 1st grade quality ) over a coat of red oxide primer etc complete all as specified and as directed. |
| 93 | S&F Vitreous China squatting pan, `Orissa' pattern, size (580 x440 mm) white, with integral foot rests (excluding flushing cistern and flush pipe) etc complete all as specified and as directed. |
| 94 | S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) etc complete all as specified and as directed. |
| 95 | S&F PVC valveless, syphonic action type, low level flushing cistern 10 Ltrs capacity with inlet, ball valve, float and handle including brackets (excluding flush/discharge pipe) etc complete all as specified and directed. |
| 96 | S&F Vitreous china WHB (550x400mm) size white flat back with brackets incl cutting or pinning ends of brackets (excluding waste pipe) etc complete all as specified and directed. |
| 97 | S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm to flushing cistern and WHB etc complete all as specified and directed. |
| 98 | S&F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) etc complete all as specified and directed. |
| 99 | S&F 15 mm bore pillar taps fancy type (long neck) cast copper alloy with capstan heads chromium plated screwed down high pressure with or without letter hot or could with long screwed and shanks and fly nuts screwed for iron pipes etc complete all as specified and directed. |
| 100 | S&F Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) with Shower arm 15 mm size, 195mm long with bend of 45 degree with flange of PTMT any colour.(Minimum weight 40gms) etc complete all as specified and directed. |
| 101 | S&F 15 mm bore angle stop valves cast copper alloy screwed down high pressured with batterfly handle screwed both ends for iron pipes fancy type choromium plated etc complete all as specified and directed. |
| 102 | S&F 15 mm bore angle stop valves cast copper alloy screwed down high pressured with batterfly handle screwed both ends for iron pipes fancy type choromium plated with long shank and cup (concealed type) etc complete all as specified and directed. |
| 103 | S&F bib tap two in one 15 mm bore fancy type chromioum plated with long shank & cup etc complete all as specified and directed. |
| 104 | S&F in repairs for bib tap 15 mm bore fancy type chromioum plated with long shank & cup etc complete all as specified and directed. |
| 105 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position etc complete in all respect as specified and directed by Engr-In-Charge. |
| 106 | S&F (600 x 450 mm) bevelled edge mirror of selected quality glass mounted on 6mm thick PVC board and fixed to wooden plug with CP brass screw and cup washer etc complete all as specified and directed. |
| 107 | S&F Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (minimum weight 300gms) etc complete all as specified and directed. |
| 108 | S&F tubular towel rail 600mm long PTMT between flanges etc complete all as specified and as directed. |
| 109 | Taking up or down 15mm dia steel tubing and connections, including cleaning for refixing or removal to store etc complete all as speccified and as directed. |
| 110 | Taking up or down 20mm dia steel tubing and connections, including cleaning for refixing or removal to store etc complete all as speccified and as directed |
| 111 | S&F 15mm bore GI tubing medium grade with all fittings fixed to walls or laid in floors in concealed type etc complete all as specified and directed by Eng-In-Charge. |
| 112 | S&F 20mm bore GI tubing medium grade with all fittings fixed to walls or laid in floors in concealed type etc complete all as specified and directed by Eng-In-Charge. |
| 113 | Cutting chases, pinning in. making good to facings where required and pointing in cm (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth etc complete all as specified and as directed |
| 114 | S&F 100 mm dia CI (sand cast) waste and vent pipes in any length fixed with cement joints laid in trenches or in floor etc complete all as specified and directed. |
| 115 | S&F 100 mm bore CI bend (Sand cast) of any radius with oval access door including jointing with cement joints etc complete all as specified and directed. |
| 116 | S&F 100 mm bore CI bend (Sand cast) of any radius with with duck's foot or heel rest including jointing with cement joints etc complete all as specified and directed. |
| 117 | S&F 100mm bore CI (Sand cast), junction single, (Single T) equal or unequal etc complete all as specified and directed. |
| 118 | S&F 100mm bore CI Trap (SWR) `P' or 'S' type etc complete all as specified and directed. |
| 119 | S&F 110mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 120 | S&F 110mm PVC (SWR) as in drain pipes single socketed in any length with rubber ring joints fixed to walls etc complete all as specified and directed. |
| 121 | S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 122 | S&F 110mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed. |
| 123 | S&F 75 mm PVC (SWR) as in drain pipes single socketed in any length with rubber ring joints fixed to walls or floors etc complete all as specified and directed. |
| 124 | S&F 75 mm bore PVC (SWR) bends and Tee any radius complete all as specified and directed. |
| 125 | S&F grating doom 100mm dia of PTMT (minimum weightt 25 gm) for floor trap/nahani trap all as specified and directed. |
| 126 | S&F PVC (SWR) floor trap, dia of outlet 75mm plain with grating including jointing with solvent cement etc complete as specified and directed. |
| 127 | M&L for corner shelf of granite 18-20mm thick cut to 8\\" to 10\\" radious and fixed complete all as specified and as directed. |
| 128 | S&F Rotational moulded polyethylene water storage tank with triple layered White colour with ISI Marked including, plastic lid cover, cylindrical vertical with closed top hoisted and fixed in position of capacity 2000 ltrs including making connections, 20 mm dia ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ballscrewed for iron pipe anf fixed (min wt 210 gram) complete all as specified in SSR Part I complete all as specified and as directed by Engineer-in-Charge. |
| 129 | S&F CPVC Ball valve (Gate valve) quarter turn screwed both ends for CPVC pipe or for unions of 25 mm dia bore and fixed all etc complete all as specified and directed by Engr-In-Charge. |
| 130 | S&F Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 20 mm iron pipe or for unions and fixed etc complete all as specified and directed by Engr-In-Charge. |
| 131 | M&L for 100 mm thick cement concrete (1:4:8), type D2, ( 40 mm graded stone aggregate ) as in sub floors finishing surfaces of concrete topping even and fair (without using extra cement) including necessary formwork etc complete all as specified and directed by Engineer-in-Charge. |
| 132 | Material and labour for screed bed or bedding layers of 20 mm thick in cement mortar (1:6) for laying floor finishes etc complete all as specified and directed by Engineer-in-Charge. |
| 133 | Material and labour for chequered cement concrete tiles glossy finish size 300 x 300 x 25mm thick with mixture of white and gray cement in equal proportion and no pigment set, jointed and pointed in neat cement slurry in floors etc complete all as specified and directed by Engineer-in-Charge. |
| 134 | M & L for providing cement concrete (1:2:4), type B1 (using 20mm graded crushed stone aggregate) cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork etc complete all as specified and directed. |
| 135 | Excavation in trenches n exc 1.5 m deep and n exc 1.5 m width and getting out in Hard/dense soil etc complete all as directed by Engineer - in - Charge |
| 136 | Excavating over areas, n exc 1.5m deep and getting out in Hard/dense soil etc complete all as directed by Engineer - in - Charge |
| 137 | Excavating over areas, exc 1.5m deep but n exc 3.00m and getting out in Hard/dense soil etc complete all as directed by Engineer - in - Charge |
| 138 | M&L for Precast RCC (1:2:4), type B1, using 20mm graded stone aggregates as in manhole, septic tank cover and soak well cover including necessary form work set in cement mortar (1:4) etc complete all as specified and as directed |
| 139 | M&L for Plain cement concrete (1:3:6), type C-2, using 40mm graded stone aggregate as in concrete bed including packing under & haunching against sides of bore pipes after the pipe are laid and tested for 150mm etc complete all as specified and directed by Engineer-in-Charge. |
| 140 | M&L for Sail-glazed stoneware drain pipes laid in trenches with collar and jointed etc complete all as specified and directed. |
| 141 | M&L for Cutting salt-glazed stoneware drain pipe in position, including jointing socket end of new pipe to same with packed spun yarn and cement mortar (1:1) etc complete all as specified and as directed.. |
| 142 | S&F in repairs Salt Glazed gully trap square or round mouthed 150X150mm, (type p or q or s )setting and jointing with solvent cement etc complete all as specified and as directed |
| 143 | M&L for RCC (nominal mix) (1:1.5:3), Type A1, (using 20mm gradded stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc complete all as specified & as directed.. |
| 144 | M&L for RCC (nominal mix)(1:1.5:3), Type A1, (using 20mm gradded stone aggregate) as in Columns, pillars, piers, posts and struts etc complete all as specified & as directed. |
| 145 | M&L for RCC (nominal mix)(1:1.5:3), Type A1, (using 20mm gradded stone aggregate) as in beams and lintels above1.50m clear span etc complete all as specified & as directed.. |
| 146 | M&L for use and waste of formwork to sides of concrete of rough finished on flat surfaces in foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc complete all as specified and as directed by Engineer in Charge. |
| 147 | M&L for use and waste of form work to sides of pillars, posts, struts, piers, columns etc. square, rectangular or polygonal section as in rough finished surfaces etc complete all as specified and directed. |
| 148 | M&L for brick work with sub class 'B' old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) etc complete all as specified and directed. |
| 149 | Providing precast cement concrete (1:2:4), type B0 (using 12.5mm graded stone aggregate) louvres and jallies, 25mm thick set in cement mortar (1:4) (measured solid), including all mouldings etc complete all as specified and directed by Engr -in-charge. |
| 150 | INTERNAL ELECTRIFICATIONTaking down of unserviceable copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as specified and as directed. |
| 151 | Taking down of unserviceable copper/aluminium submain/ckt wiring of any size complete, including PVC caping casing / PVC Conduit on wall /Floor and ceiling, etc. removing materials for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as specified and as directed. |
| 152 | Taking down of unserviceable VTPN/SPN DB box of any size complete, including MCBs/MCCBs, etc for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as specified and as directed. |
| 153 | M&L for point wiring complete as specified with 1100 V grade with 1.5 Sq mm single core PVC insulated unsheathed FRLS cable, copper conductor multistranded passing through including PVC caping casing slotted 40/25/20 mm width on wall /Floor and ceiling, alongwith concealed modular metal box suitable for logic modular switches , sockets , logic modular white plates, etc of suitable size as required at site with PVC insulated FRLS unsheathed stranded copper conductor of size 1.5 sq mm as earth wire connected to common earth dolly as specified complete all as specified and directed for the following:- Note: - (i) Rate quoted shall include for cost of making modular metal box and concealed in wall including cutting and sinking of boxes and making good to the walls (No extra payment will be made for the same)(ii) Provision of blank plates as per site requirement (No extra payment will be made for the same)(a) One light point / one fan point/one exhaust fan point controlled by one, one way swtich. |
| 154 | (b) One 3 pin socket outlet, 5 amps, indepe ndent, with cables 1.5 sq. mm size |
| 155 | (c) One 3 pin socket outlet, 5 amps on the same board with other switches, with cables 1.5 sq. mm size |
| 156 | All as per ser item No. 153 herein before but with 4.0 Sqmm PVC copper stranded cable FRLS type for one 15 Amp 5 pin socket outlet point, independent, including PVC cable 4.0 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to common earth & earth terminals including boards for mounting purposes. |
| 157 | Supply and fixing Switch modular type, single pole, one way, 5/6 Amp, one module, etc completes all as specified and directed. |
| 158 | Supply and fixing socket outlet multipurpose having provision for 6 A-2/3 pin combined, two module etc complete all as specified and directed. |
| 159 | Supply and fixing Switch modular type, single pole, one way, and 15/16 Amps, one module etc complete all as specified and directed. |
| 160 | Supply and fixing socket outlet multipurpose having provision for 6/16 Amp-2/3 pin, combined 2 module etc complete all as specified and directed. |
| 161 | Supply & Fix in repair modular fan step regulator, 120 W, two module, suitable for 1200/1400 mm sweep ceiling fan as reqd complete all as specified and as directed by Engr-in-Charge. |
| 162 | S&F White cover plate with frame,1 module etc complete all as specified and directed. |
| 163 | S&F White cover plate with frame, 2 module etc complete all as specified and directed. |
| 164 | S&F White cover plate with frame, 3 module etc complete all as specified and directed. |
| 165 | S&F White cover plate with frame, 6 module etc complete all as specified and directed. |
| 166 | S&F White cover plate with frame, 8 module etc complete all as specified and directed. |
| 167 | S&F White cover plate with frame, 12 module etc complete all as specified and directed. |
| 168 | S&F White cover plate with frame,4 module etc complete all as specified and directed. |
| 169 | S&F ceiling rose, 3 phase/PVC/Polycarbonate, isolated body etc complete all as specified and as directed. |
| 170 | S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings, etc complete all as specified and as directed. |
| 171 | S&F globe shaped post top lantern LED type 40 Watt 230 V AC outdoor type with decorative top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp etc complete all as specified and as directed. |
| 172 | S&F conical shaped post top lantern LED type 40 Watt 230 V AC outdoor type with decorative top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp etc complete all as specified and as directed. |
| 173 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V, AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size etc complete all as specified and as directed. |
| 174 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose etc complete all as specified and as directed. |
| 175 | Supply and fixing LED luminaire 600 mm x 600 mm, 40 watt, 220 V, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up driver with three core flexible copper conductor cases of suitable size etc complete all as specified and as directed by Engr-in-charge. |
| 176 | Supply and fixing rechargeable emergency LED bulbs 9 W, 230 V AC, cool white colour with minimum 04 hours backup, automatic battery charging, overcharge & deep discharge protection alongwith 4 kv surge protection to endure power fluctuations incl. integral driver, etc complete all as specified and directed by Engr-in-Charge. |
| 177 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with blades and frame and louvers including core cutting for mounting of exhaust fan with necessary electric connections etc complete all as specified and as directed by Engr-in-Charge. |
| 178 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. including two flexible steel pipe 600mm long. (inlet & outlet) with both ends screw bolt etc complete all as specified and as directed by Engr-in-Charge. |
| 179 | Supply and fix Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 Amp MCB, 240 V etc complete all as specified and as directed. |
| 180 | S&F Distribution board double door SPN 6 Way for MCBs fitted with bus bar, Neutral link, Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door after taking down old unserviceable DB's and including making good the distrubed surface and matching with existing colour etc complete all as specified and as directed. |
| 181 | S&F Distribution board double door SPN 8 Way for MCBs fitted with bus bar, Neutral link, Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door after taking down old unserviceable DB's and including making good the distrubed surface and matching with existing colour etc complete all as specified and as directed. |
| 182 | S&F Distribution board double door SPN 12 Way for MCBs fitted with bus bar, Neutral link, Earth Bar and Din rail suitable for use on 240 V, 50 Hz supply double door after taking down old unserviceable DB's and including making good the distrubed surface and matching with existing colour etc complete all as specified and as directed. |
| 183 | S&F VTPN distribution board with provision of MCCB as incommer, double door suitable for mounting MCB's/Isolators, 415 Volt - 4 way with built in 160A rated bus bar and without MCCB complete after taking down old unserviceable DB's and including making good the distrubed surface and matching with existing colour etc complete all as specified and as directed. |
| 184 | S&F VTPN distribution board with provision of MCCB as incommer, double door suitable for mounting MCB's/Isolators, 415 Volt - 6 way with built in 160A rated bus bar and without MCCB complete after taking down old unserviceable DB's and including making good the distrubed surface and matching with existing colour etc complete all as specified and as directed. |
| 185 | Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP 6 to 32 Amp and current carrying capacity in the MCB DB complete with connection testing and commissioning etc complete all as specified and as directed. . |
| 186 | Supply and fixing amp rating 240V, 10KA 'C' curveminiature circuit breaker (MCB) of SPN 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning etc complete all as specified and as directed. |
| 187 | S & F MCCB, 4P, 63 A, 415 V, 50 Hz with rupturing capacity of 16KA complete all as specified and as directed. |
| 188 | S & F MCCB, 4P, 100 A, 415 V, 50 Hz with rupturing capacity of 16KA etc complete all as specified and as directed. |
| 189 | S & F MCCB, 4P, 125 A, 415 V, 50 Hz with rupturing capacity of 16KA etc complete all as specified and as directed. |
| 190 | M&L in repair for submain wiring with 2 X 4.0 Sqmm +1 X 4.0 Sqmm Earth Wire single core PVC insulated FRSL sheathed cooper cable connecting to common earth dolly in and including heavy duty PVC Caping Casing as per site requirement and direction by EIC, including all accessories etc complete all as specified and directed.(Note: Two runs of 4.0 Sqmm, one run of earth wire of size 4.0 Sqmm and one run of PVC casing capping shall be measured as one unit). |
| 191 | M&L in repair for submain wiring with 2 X 6.0 Sqmm + 1 X 6.0 Sqmm Earth Wire single core PVC insulated FRSL sheathed cooper cable connecting to common earth dolly in and including heavy duty PVC Caping casing as per site requirement and direction by EIC, including all accessories etc complete all as specified and directed.(Note: Two runs of 6.0 Sqmm, one run of earth wire of size 460 Sqmm and one run of PVC casing capping shall be measured as one unit). Please Enable Macros to View BoQ information |
| 192 | M&L in repair for submain wiring with 2 X 6.0 Sqmm + 1 X 6.0 Sqmm Earth Wire single core PVC insulated FRSL sheathed cooper cable connecting to common earth dolly in and including heavy duty PVC Caping casing as per site requirement and direction by EIC, including all accessories etc complete all as specified and directed.(Note: Two runs of 6.0 Sqmm, one run of earth wire of size 460 Sqmm and one run of PVC casing capping shall be measured as one unit). Please Enable Macros to View BoQ information |