|
| 1 | Taking out old broken glass (any size, quality or description) from steel frames glazed with putty or beads and S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm. in each pane complete all as specified and directed. |
| 2 | Taking out old broken glass (any size, quality or description) from steel frames glazed with putty or beads and S&F 3mm thick figure glass pin headed type, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm. in each pane complete all as specified and directed. |
| 3 | Taking out old broken glass (any size, quality or description) from steel frames glazed with putty or beads and S&F 5mm thick figure glass pin headed type, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm. in each pane complete all as specified and directed. |
| 4 | S&F in repair door stopper over all length of cover plate 125mm of MS body, complete all as specified and directed Make: Prayag (Cat No. DSI-CI5-SS 125mm) |
| 5 | S&F in repair Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor (Cat No. DSI-CI5-SS 125mm) |
| 6 | S & F in repair 100mm size hasp and staple,aluminium anodised, safety type including bolt to hinge plate complete all as specified and directed. |
| 7 | S & F in repair Stainless steel handle, ISI marked, 150 mm size, oval type, stove enamelled complete all as specified and directed. |
| 8 | S & F in repair extrded aluminium handle, fabricated type, anodised, 150mm size conforming to IS complete all as specified and directed. |
| 9 | S & F in repair extrded aluminium handle, fabricated type, anodised, 125mm size conforming to IS complete all as specified and directed. |
| 10 | S&F in repair aluminium, anodised, barrel tower bolt of extruded section, ISI marked, 150 mm long complete all as specified and directed. |
| 11 | S&F in repair aluminium, anodised, barrel tower bolt of extruded section, ISI marked, 200 mm long complete all as specified and directed. |
| 12 | S&F in repair Stainless steel butt hinges, medium weight, cold rolled, ISI marked of size 100 mm complete all as specified and directed. |
| 13 | S & F in repair Stainless Steel sliding door bolts 300 mm long, not less than 16 mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate complete all as specified and directed.(Make: Prayag, Cat No. SLD-1612) |
| 14 | S & F in repair 300mm long aluminium alloy, anodised, sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. |
| 15 | S & F in repair 50mm stainless steel handle for cup board, complete all as specified and directed. |
| 16 | S & F in repair Stainless Steel Hydraulic Hinges (pair) fixed with nuts, screw and washer complete all as specified and directed. (Make: Prayag, Cat No HYD-HG8-SS) |
| 17 | S & F in repair Stainless Steel 450mm Telescopic Channel steel ball (Pair), complete all as specified and directed. (Make: Prayag, Cat No TSC-SB18-ZNY 450mm) |
| 18 | S & F in repair mild steel casement stays, size 300mm, with hinged joint and two plates with studs complete all as specified and directed. |
| 19 | S & F in repair magnet door catcher 30mm size of approved quality & suitable for cupboard shutter & cabinet complete all as specified and directed. |
| 20 | S&F 300 mm long helical rat tail door spring including roller & roller plate complete all as specified and directed. |
| 21 | S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed on wooden/steel frames with tinned tacks or stainless steel wire staple complete all as specified and directed |
| 22 | Taking out old unserviceable wooden fillets & M&L for 2nd class HW , plain fillets of sectional area exc 3 sqcm but not exc 6 Sqcm, rectangular/square in section clean sawn , fixed with nails complete all as specified and directed. |
| 23 | S & F continuous (piano) hinges, mild steel, bright finish or electro galvanised, width of flaps (when open) 30mm complete all as specified and directed. |
| 24 | S & F in repairs 18/19mm thick MDF board one side laminated decorative type with decorative face veneer on one face fixed complete, including teak wood lipping 19 x 6mm thick fixed with nails in shelves, partition and palmet boxes, shelves, almirah book cases, toilet boxes, racks, cup board shutter and similar works complete all as spepcified and directed. |
| 25 | S & F in repairs 18mm thick (one side decorative lamination & other side balancing lamination sheet) solid PVC board of make : Rajshree or equivalent all as specified and approved by Accepting Officer with cement solvent adhesive for shutter / cup boards / partition wall / wall cabinet and similar work, Incuding handle, complete all as specified and directed. |
| 26 | M&L for resecuring or easing of door/windows/cup board shutters exc 1.0 Sqm and n.exc 2.00 Sqm each for easy closing/opening, tightening of hinges of changing the position of hinges, adjustent of tower bolts, sliding bolts handles/knobs hasps/staple etc complete all as specified and directed. Please Enable Macros to View BoQ information |
| 27 | M&L for resecuring or easing of door/windows/cup board shutters exc 1.0 Sqm and n.exc 2.00 Sqm each for easy closing/opening, tightening of hinges of changing the position of hinges, adjustent of tower bolts, sliding bolts handles/knobs hasps/staple etc complete all as specified and directed. Please Enable Macros to View BoQ information |