|
| 1 | Demolition of mud phuska as in roof of any thickness incl plastering and leeping etc (whether full thickness removed or only a part thereof) complete all as specified & directed. |
| 2 | Dismantling of existing brick tiles or terracing tiles single layer on roof grouted in cement mortar including removal of any existing treatment complete all as specified & directed. |
| 3 | PCC 1:3:6 type C-1 (using 20m graded crushed stone aggregate) as in roof padding, sub base, finished fair and even without using extra cement, complete all as specified and directed. |
| 4 | 15mm thick (average thickness) rendering on roof surfaces including flashings and junction of parapets etc finished even and fair in cement mortar 1:4 using water proofing compound as per manufacturer's instruction after brushing cement slurry complete all as specified and directedNote : WPC shall be measured and paid separately. |
| 5 | Supply only integral water proofing compound (ISI Marked) complete all as specified & directed. |
| 6 | 3mm thick Atactic polypropylene polymer (APP) modified prefabricated five layer water proofing membrane, based polymeric membrane minimum weighing 3.6kg/sqm and reinforced with polyester non woven fabric (weight not less than 150 gm/sqm) laid over a coat of bitumen primer @0.40L/Sqm by same membrane manufacturer of density 0.87 to 0.89 kg/L at 25° C temperature and viscosity 70 to 160 CPS, over primer coat bonding material of blown bitumen 85/25 grade heated to working temperature of 180° C applied @1.2Kg/Sqm. The membrane shall be laid using butane torch and sealing all joints etc after preparing the surface as per standard practice and as per manufacturer instructions and finished with applying one coat of bituminous aluminium paint @100gm/sqm on top of membrane, complete all as specified & directed. |
| 7 | 40mm thick brick tiles laid over and including 20mm thick cement mortar 1:4 jointed grouted and pointed complete mixed with crude oil 5% by weight of cement complete all as specified and directed. |
| 8 | All as per serial item No 7 herein before but except tiles complete all as specified and directed. |
| 9 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviveable tiles to store and rubbish off the premises complete all as specified and directed |
| 10 | Non skid ceramic coloured tiles 7 to 8 mm thick square/rectangular) area of each tile exc 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 15 mm thick bedding layer in CM 1:4, complete all as specified and directed. |
| 11 | Glazed ceramic coloured tiles 7mm thick in vertical surface like skirting, dado of area exc 0.13 sqm but not exc 0.27 sqm complete, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over a 15mm thick rendering in cement mortar 1:6 complete all as specified and directed |
| 12 | 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base finished fair and even without using extra cement, complete all as specified and directed. |
| 13 | Demolition of brick work built in cement mortar including all quoins, arches, pillar etc complete all as specified and directed. |
| 14 | Brick work using old size bricks, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar 1:6, complete all as specified and directed. |
| 15 | 15mm thick rendering in Cement and Sand mortar 1:6 over brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed |
| 16 | Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over and including coat of primer after preparing the surfaces, complete all as specified and directed. |
| 17 | Taking down cement plaster on brick/ stone walls etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed. |
| 18 | 10mm thick rendering in Cement and Sand mortar 1:3 over ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed |
| 19 | Preparation of new surfaces facia, ceiling, RCC chajja etc and applying two coats of oil bound distemper over one coat of wall primer complete all as specified and directed. |
| 20 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded or laid bedded pointed in any mortar, all as specified. |
| 21 | Granite (of any type) 15mm thick, as in flooring machine cut, bedded and jointed with grey cement slurry and pointed with white cement match the shade of granite stone including grinding and polishing over and including screed bed 15mm thick in cement mortar 1:4 complete all as specified and directed. |
| 22 | Vitreous China Urinal, Half stall type, white complete including providing and fixing clamps, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement including CP Coupling, flush pipe, grating and union for discharged pipe complete all as specified and directed. |
| 23 | Single piece EWC (one piece) Vitreous chaina of minimum size 715 x 335 x 715mm, , snow white colour, S-trap with integraed flushing cistern, including slim soft close seat cover , fixed as in repairs, complete all as specified and directed. |
| 24 | Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect, fixed as in repair complete all as specified and directed. |
| 25 | Bib taps brass, fancy type, long body with wall flange, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed. |
| 26 | Vitreous china, table top wash hand basin, of size 575 x 430 x 175mm including CP waste coupling, WHB mixer for hot and cold water and waste pipe complete all as specified and directed. Make : JAQUAR cat part ACS-WHT 87901 or equivalent in CERA/ KHOLAR |
| 27 | Wash hand basin, vitreous china, flat back , white , of size 580X440mm, including angle brackets waste coupling and waste pipe, angle bracket of suitable size is required at site complete all as specified and directed. |
| 28 | 15mm bore pillar tap, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, fixed in repair, complete all as specified and directed. |
| 29 | Stop valve (concealed type), chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, complete all as specified and directed. |
| 30 | Taking down chowkhats or frame n.exc 1.5 Sqm with shutter (without taking off shutters from the frame) complete all as specified & directed. |
| 31 | Taking down chowkats or frame exc. 1.5 Sqm and n exc 4 Square metre with shutters, without taking off shutters from the frame, complete all as specified and directed. |
| 32 | Powder coated aluminium sections as in frames/ shutter of doors/window /ventilators /partitions, (Sliding / openable) including joining cleats, glazing clips, rubber neoprene beading, powder coated aluminim snap beading, screws etc. complete all as specified and directedNote : (i) Minimum thickness of power coating shall not be less than 50 micron.(ii) Weight of aluminum section only shall be measuerd and paid.(iii) Aluminum doors/windows /ventilators to be fixed to jambs with chromium plated screws .(iv) The rate shall be inclusive of neoprene beadings, snap beading, screws etc and in case of sliding shutters locking arrangement and rollers in sliding shutters. Weight of fitting fixtures will not be measured for arriving the weight of aluminum section.(v) Glass /wooden panel/ACP sheet shall be measured and paid separately under respective items.(vi) Design as directed by Engineer in charge. |
| 33 | 4mm thick aluminium composite panel sheet (ACP) fixed with aluminium beading with rubber gasket including all necessary clips and fittings colour as approved by Engr-in-Charge all as specified and directed. |
| 34 | 150mm long aluminium handles, cast type anodised type, complete all as specified and directed. |
| 35 | 150 mm size aluminium, barrel tower bolt of extruded section and fixed complete all as specified and directed. |
| 36 | 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed,complete all as specified and directed. |
| 37 | 5mm thick tinted sheet glass fixed to aluminum frame work with and including standard anodized aluminum bead, rubber packing, aluminum screws etc, in panels exc 0.5 Square metre in each pane, complete all as specified & directed. |
| 38 | Stainless steel towel rail 600mm long of fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 190gms), fixed in repair complete all as specified and directed. |
| 39 | Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed in floor (140mm size), complete all as specified and directed. |
| 40 | Door closer hydraulically regulated of aluminium extruded section, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg, fixed as in repair complete all as specified and directed. |
| 41 | PVC (SWR) rain water pipe, 110mm bore, single socketed in any length with rubber ring joints, fixed to walls or laid in trenchs or floor complete all as specified and directed. |
| 42 | PCC 1:3:6, type C-2 (using 40mm graded crushed stone aggregate), concrete bed to drain pipes including packing under and haunching against the sides of the pipe after they are laid and tested complete all as specified and directed by Eng-in-charge. |
| 43 | 110 mm bore PVC (SWR) bends of any radius, fixed as in repair complete all as specified and directed. |
| 44 | Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or ¾ section) in plain cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required, internal dia of pipe 110mm all as specified and directed. |
| 45 | Toilet paper holder, cast copper alloy, chromium plated fixed in position, complete all as specified and directed. |
| 46 | Applying self adhesive waterproof Texture paint with 100% acrylic latex resin (locally known as Sand dune paint) over and including 1-2mmm thick wall care putty as per manufacturer's instruction to the surface of wall / ceiling/ chajjas / roof projection in patches including complete removal of existing surface complete all as specified and directed. Note : (i) All including providing scaffolding and safety equipment upto 3 storey building. (ii) Colour / Shade/Texture of paint will be decided by GE |
| 47 | Brick work with sub class ‘B’ bricks, straight or curved on plan to radius in half brick thick wall built in cement mortar 1:6, complete all as specified & directed. |
| 48 | Rendering 15mm thick in Cement and Sand mortar 1:4 over fair faces of brick / concrete ,finished even and smooth without using extra cement, including using water proofing compound, including necessary scaffolding & safety arrangement for plaster upto & including 4 storey building complete all as specified. Note : WPC shall be measured and paid separately. |
| 49 | Preparation of new surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed.Note :(i) Acrylic exterior paint shall be done by authorised applicator(ii) All necessary scaffolding, safety equipment and all other tool & material shall be inclusive in rate quoted against this item. |
| 50 | Preparation of new surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed.Note :(i) Acrylic exterior paint shall be done by authorised applicator(ii) All necessary scaffolding, safety equipment and all other tool & material shall be inclusive in rate quoted against this item. |
| 51 | Preparation of old plastered wall surfaces and applying two coats of oil bound distemper of approved tint over a coat of primer, complete all as specified and directed. |
| 52 | Preparation of old surfaces of any description of walls,facia, ceiling, RCC etc and applying two coats of oil bound distemper of approved tint over one coat of wall primer complete all as specified and directed. |
| 53 | Water proofing treatment to SUNKEN PORTION and adjoining walls of kitchen, WC, Bath & Toilet, etc, as follows, complete all as specified & directed :- (a) Roughening of surface of old concrete floor/ slab by wire brushing, sweeping,cleaning and washing down to remove all loose dust etc and brushing neat cement slurry @ 3.00 Kg/Sqm on floor/roof/vertical wall surface complete.(b) 15 mm thick screed plaster in cement mortar (1:3) mixed with WP compound as per manufacturer's instructions shall be provided on sunken portion after roughening of surfaces. (c) Apply cement slurry to the surface @ 0.488 kg /Sqm of cement mixed with Acrylic based polymer modified Cementious composite compound @ 0.253 kg/Sqm and the surface will be allowed to air cure for 4 hours.(d) Apply another layer of cement slurry @ 0.242 kg/Sq. m of cement mixed with Acrylic based polymer modified cementious composite compound @ 0.126 Kg/Sq. m and the surface will be allowed to air cure for 4 hours.(e) Paste one layer of 200mm thick micron polythene film pasted with the help of adhesives shall be provided over treatment.(f) Ponding test will be carried out for 72 hrs after completion of sunken treatement |
| 54 | 40mm bore steel water tube medium grade galvanized as in spout for sunken floor, fixed in wall inside and fixed with wire netting and external beveled edge at 45 degree, including taking out existing steel tubing of any size from floors, ceiling, walls etc complete all as specified and directed. |
| 55 | Plain cement concrete 1:7:12 type F-2 using 40mm graded brick coarse aggregate as in sunken floor filling and mass concrete complete all as specified & directed. |
| 56 | Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness. (Below or above ground level) complete all as specified and directed. |
| 57 | Demolition of cement concrete (reinforced) of any description and in any position, including reinforcement cut as required to facilitate demolition complete all as specified and directed |
| 58 | 15mm dia PVC connection with PTMT nut, of length 600mm, fixed as in repair complete all as specified and directed. |
| 59 | Stainless steel towel ring of CP fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 90gms), complete all as specified and directed. |
| 60 | Looking mirror of size 600mmx450mm of selected quality mounted on PVC frame and back fixed to wall with screw and rawl plugs, fixed as in repairs,complete all as specified and directed. |
| 61 | PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes, set with concrete and making good to floor, fixed in repair complete all as specified & directed. |
| 62 | 75mm bore PVC (SWR) bends any radius with access door, etc complete all as specified and directed |
| 63 | PVC (SWR) junction single, (Single T) equal or unequal for 75mm bore pipe, fixed as in repair complete all as specified and directed. |
| 64 | PVC (SWR) pipe, 75mm bore, single socketed in any length with rubber ring joints, laid in floors in trenches, complete all as specified and directed. |
| 65 | Nahani traps 100mm dia with grating including jointing to waste pipe with run lead jointed and setting/fixed in cement concrete type B-1 1:2:4 fixed as in repair complete all as specified and directed. |
| 66 | PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement fixed as in repair complete all as specified and directed. |
| 67 | Vitreous china urinal partition white of size 310 x 700mm urinal partitions slabs terminating about 40cm above floor line complete all as specified and directed. |
| 68 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 69 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in- Charge |
| 70 | 100 mm size butt hinges medium weight cold rolled stainless steel complete, all as specified and directed. |
| 71 | Applying Wall care putty (average thickness 1-2mm as required for desired smoothness and leveling of surfaces in two or more layers) and sand papering for making the surfaces even and smooth complete all as specified and directed. |
| 72 | Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge, including making good dismantled portion with PCC (1:2:4) type B-1 in CM 1:3 complete all as specified and directed. |
| 73 | Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 74 | Powder coated aluminium grill (minimum thickness of powder coating 50 micron) of approved design / pattern (Apprature of grill should not be more than 75mm) with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200mm center to center, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodized aluminium standard section around the opening , including aluminium ‘U’ channel and all necessary fitting complete all as per requirement of Engineer-in-Charge. |
| 75 | Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm including fixed with stainless steel wire staples complete all as specified & directed. |
| 76 | 4.80mm thick ordinary quality tinted glass, fixed to aluminum frame work in panels n. exc 0.5 Sqm in each pane, complete all as specified & directed. |
| 77 | 4.00mm thick ordinary quality tinted glass, fixed to aluminum frame work in panels n.exc 0.5 Sqm in each pane, complete all as specified & directed. |
| 78 | Louvers wall panels with thickness not less10mm thick and not less than 250mm wide interlocking type system as in wall / ceiling linings including end and intermediate U or L PVC sections as per manufacturer instructions complete all as specified and directed.Note : Colour / design and pattern as approved by Engineer-in-Charge. |
| 79 | 12mm thick seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish including suitable GI frame work compelte all as specified and directed. |
| 80 | Vitrified ceramic coloured, dark shade, double / ultra charge tiles 10mm thick (square / rectangular) polished, area of each tiles exceeding 0.42 Sqm but not exceeding 1.00sqm, in floors etc set and jointed in neat cement slurry @ 3 Kg /sqm and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 81 | All as per serial item No 80 herein before but on skirting etc over and including 10mm thick rendering in cement mortar 1:4 |
| 82 | 12mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holeswith necessary screws/ beading, rubber packing, L Patch bottom and top, self clossing patch etc complete all as specified and directed. |
| 83 | Door closer hydraulically regulated aluminum (die cast) body, designation No 3, universal type, suitable for door shutters of 701mm to 850mm in width and of weight between 36 to 60 Kg, complete all as specified and directed. |
| 84 | Mortice lock, verticle type, mild steel, 4 levers, size 100mm, brass body, complete all as specified and directed |
| 85 | Stainless steel lock for 10-12mm thick glass door, having knob inside with three keys, satin finish, complete all as specified and directed. |
| 86 | 300 mm long stainless steel handle, fancy type , fixed to toughened glass, complete all as specified and directed. |
| 87 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed. |
| 88 | Point wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade, two run of single core cable for phase & neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly in and including new concealed PVC conduit terminated on and including new modular sunken box and suitable size of frame, cover for mounting switch, socket and regulator fixed on surface flush with wall , comprising of One light /bell/buzzer point controlled by one switch or one fan point controlled by one switch &fan regulator, complete all as specified and directed. Note : Unit rate is inclusive of making good the disturbed surfaces by provding by wall putty/POP after mason work and finshing to match the original and nothing extra shall be paid on this account. Note :Unit rate is inclusive of cutting chases in wall /foor/PCC and making good the disturbed surfaces to match the original and nothing extra shall be paid on this account. |
| 89 | All as per serial item 88 herein before but for socket outlet 3 pin 6Amps on same board complete all as specified and directed |
| 90 | All as per serial item 88 herein before but for socket outlet 3 pin 6 Amps on independent board complete all as specified and directed |
| 91 | All as per serial item 88 herein before but One socket outlet three pin ,6/16 Amp, independent board, with 2.5 Sqmm (nominal area ) FRLSH cable & 2.5 Sqmm (nominal area ) cable as earth continuity conductor |
| 92 | Switch modular type (ISI marked), single pole, one way 6 Amps, one module (ISI marked), complete all as specified & directed. |
| 93 | Switch modular type (ISI marked), single pole, one way 16 Amps, one module (ISI marked), complete all as specified & directed. |
| 94 | Socket outlet 2/3 pin 6 Amp modular type multi purpose two module (ISI marked), complete all as specified & directed. |
| 95 | Socket outlet 2 in 1 pin 6/16 Amp modular type multi purpose combined 2 module (ISI marked), complete all as specified & directed. |
| 96 | Modular white cover plate with frame, suitable for 2 module complete all as specified and directed. |
| 97 | Modular white cover plate with frame, suitable for 3 module complete all as specified and directed. |
| 98 | Modular white cover plate with frame, suitable for 6 module complete all as specified and directed. |
| 99 | Modular white cover plate with frame, suitable for 8 module complete all as specified and directed. |
| 100 | Ceiling rose, PVC or polycarbonate of size 65mmx50mm three terminals (ISI marked) all as specified and directed by Engineer-in-charge. |
| 101 | Electric Bell, multi music type, AC, 230 volts, single pole all as specified and directed by Engineer-in-charge. |
| 102 | Lamp holder, PVC/Polycarbonate type with back plate modular type fixed on wall suitable for batten fitting ,complete all as specified and directed. |
| 103 | LED Bulb 12 watt self ballasted Retrofit type lamp with PBT body shell and DC diffuser CCT 6500 K complete all as specified and directed. |
| 104 | Slim LED lights fitting, 4 feet, 1x 20W, inverter rechargeable, inbuilt lithium ion battery with charging time 8 to 10 hrs & back upt time minimum 8 hrs, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose fixed as in repair complete all as specified and directed. |
| 105 | LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, compelte all as specified and directed. |
| 106 | LED Mirror Lights fitting 17 watt cool day white of approx size 540 x 100 x 35 mm , 220V AC decorative/model ultron type including fitting fixed on wall/ceiling and connecting up complete with flexible cable white of suitable size and making necessary connection fixed as in repair complete all as specified and directed. |
| 107 | LED Industrial outdoor type Bulkhead luminaires,IP rating not less than 45, highly resistant to dust and water 1 x 9/10 Watt fitting in engineering plastic housing with clear prismatic diffuser complete with all accessories and connecting up with flexible cable white of suitable size and making necessary connection fixed as in repair complete all as specified and directed. |
| 108 | Hanging/fixing only serviceable ceiling/exhaust fan any make/ sweep and connecting up with existing electric circuit complete received from MES Store Yard all as specified and directed. |
| 109 | Taking down carefully old unserviceable ceiling fan/wall fan/exhaust fan complete removing its blade and deposit to the MES store yard complete all as specified and directed. |
| 110 | Taking down carefully old unserviceable Geyser of any capacity complete removing and keeping in safe custody by Contractor and refixing the same after completion of B/R work complete all as specified and directed. |
| 111 | Electric water heater(vertical type geyser), capacity 25 litre, 2 KW BEE 5 Star rated AC single phase, including MS glass lined inner tank, glass coated heating element, high density PUF insulation, Anode rod protection, heavy duty fastner not less than 100mm with suitable size of nut & washer grouted in wall with complete mason work for proper mounting of geyser fastner bolts with all accessories such as safety valve, thermostat, NRV, connection piece etc. making necessary inlet / outlet water connection, testing on load complete all as specified and directed. |
| 112 | Taking down carefully old copper or aluminium sub main wiring of any Nos of wiring and size with earth wire on wooden batten/ surface conduit/ casing- capping complete with its all accessories and making good disturbed surfaces of wall , floors etc complete all as specified and directed. |
| 113 | Sub main wiring with two single core FRLSH PVC insulated and unsheathed cable with copper conductor of size 4 Sqmm (nominal area), 1100 Volt grade(with approved colour coding as per IS) with and including continuous earth wire of size 4 Sqmm PVC insulated and unsheathed FRLSH multi stranded copper conductor 1100 volts grade , and connected to main board drawing through PVC concealed conduit 25mm size(minimum size), cutting chases in walls for PVC concealed conduit and making good the disturbed surfaces by providing by wall putty/POP after mason work and finshing to match the original surfaces and nothing extra shall be paid on this account all as specified and directed. |
| 114 | Sub main wiring with two single core FRLSH PVC insulated and unsheathed cable with copper conductor of size 6 Sqmm (nominal area), 1100 Volt grade(with approved colour coding as per IS) with and including continuous earth wire of size 6 Sqmm PVC insulated and unsheathed FRLSH multi stranded copper conductor 1100 volts grade , and connected to main board drawing through PVC concealed conduit 25mm size(minimum size), cutting chases in walls for PVC concealed conduit and making good the disturbed surfaces by providing by wall putty/POP after mason work and finshing to match the original surfaces and nothing extra shall be paid on this account all as specified and directed. NOTE FOR SERIAL ITEM NO 113 & 114: (i) Two runs of cable, one run of earth wire shall be considered as one running metre(ii) Cutting chases will be measured and paid separtely(iii) colour code shall be Red for phase, Black for neutral and green for earth |
| 115 | Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10cm girth Complete all as specified and directed . |
| 116 | Disconnecting the power supply and taking down carefully by unscrewing from boards fittings and fixtures such as DBs, Junction Box, Panels of any size complete with all MCCB's ,MCB's etc and removing from site, Complete all as specified and directed . |
| 117 | Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp, 240V completed all as specified and directed. |
| 118 | MCB DB, IP 43 protection, powder coated double door with locking arrangement suitable for surface and flush mounting, (2 + 10 way) 12 way SPN with 200 Amps busbar 240V completed all as specified and directed. |
| 119 | MCB DB, IP 43 protection, powder coated double door with locking arrangement suitable for surface and flush mounting, (2 + 6 way) 8 way SPN with 200 Amps busbar 240V completed all as specified and directed. |
| 120 | MCB DB, IP 43 protection, powder coated double door with locking arrangement suitable for surface and flush mounting, (2 + 2 way) 4 way SPN with 200 Amps busbar 240V completed all as specified and directed. |
| 121 | MCB, SPN , 240 volt, 40 to 63Amps, 10 KA , 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed |
| 122 | MCB ,SP , 240 volt, 6Amps to 32Amps, 10 KA , 'C' series including connection with suitable size aluminium / copper lugs, fixed as in repair complete all as specified and directed |
| 123 | Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.00mm burried directly in ground vertically to a depth not less than 2.25m below normal ground level, with top edge of the plate not less than 1.5m below normal ground level, earth plate surrounded by 15cm thick and packed alternate layers of charcoal dust and common salt, connected with and including earth lead of GI wire 4mm dia (8 SWG) by means of bolts, nuts, check nuts and washers of galvanized iron or thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15mm dia bore including watering pipe of 20mm dia, GI light grade (ISI marked) with funnel and wire mesh, including all necessary excavation and earth work, PCC chamber in plain cement concrete (1:3:6) type C-1 and presast RCC 1:2:4 type B-1 pit cover reinforced with 8mm dia MS bars both ways with lift hook made out of 8mm dia bar, watering pipe of 20mm dia GI light grade and 15mm dia light grade for earth lead protection and testing, including dismantling of old earthing completion all as specified and directed. |
| 124 | Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm including cutting openings, through brick walls in round shape , for 300mm dia exhaust fan and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required including finishing and matching the disturbed surface and removing surplus unserviceable bricks, hard-core, etc..from site and rubbish complete all as specified & directed by Engineer-in-charge. |
| 125 | Venti Air exhaust fan strong air suction, rust proof body classic type and dust protection shutters 200mm sweep, voltage 230V, 50 Hz, RPM 2100, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose including cutting openings, through brick walls in round shape , for 200mm dia exhaust fan and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required including finishing and matching the disturbed surface and removing surplus unserviceable bricks, hard-core, etc..from site and rubbish complete all as specified & directed by Engineer-in-charge. Please Enable Macros to View BoQ information |